• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.58-68
• /
• 2010

This paper proposes a novel design of auto light control system with high efficiency using RS-485 to save lighting energy in new and existing buildings. The proposed system consists of ALSU(Auto Light Sensor Unit) which is connected with RS-485 to control lighting appliances, ALS(Auto Light Unit), and Hi-FACS which is a monitoring system using communication interface. lighting appliances are automatically controlled by ALSU which detects moving objects. The total system is designed to be controlled by either manual or auto mode by using the ALS. In addition, the monitoring system receives the information on the state of the lighting appliances from ALSU and ALS to control the proposed system We compared the proposed system with the conventional one in functionality and energy saving point of view. Through some experimental results, the proposed system shows better performance in various circumstances.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1433-1439
• /
• 2012

This paper introduces a sensor system based on indoor locations in order to implement the Building Energy Management System. This system consists of a thermopile sensor and an ultrasonic sensor. The sensor module is rotated by $360^{\circ}$ and yawed up-and-down by two electric motors. Therefore, it can simultaneously detect the number and location of the inhabitants in the room. It uses wireless technology to communicate with the building manager or the smart-home server, and it can save electric energy by controlling the lighting system or heating/air conditioning equipment automatically. We also demonstrate the usefulness of the proposed system by applying it to a real environment.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.294-301
• /
• 2018

In winter, thermal screens are widely used to reduce heat loss from greenhouse to save energy. Unfortunately, not much data are available to the farmer to compare thermal screens while selecting the one that meets their specific requirements. Thus, there is a need to investigate the thermal performance of thermal screens. To address this issue, the Building Energy Simulation (BES) model of a hot box was used to calculate the overall heat transfer coefficient (U-value) of the thermal screens. To validate the model, computed and experimental U-values of single-and double-layered polyethylene (PE) material were compared. This validated model was used to predict the U-values of the selected thermal screens under defined weather conditions. We quantified the U-values of each selected material and significant changes in their U-values were noted in response to different weather conditions. Notably, the thermal properties of the tested screens were taken from the previous literature to calculate U-values using the BES model. The U-values of the thermal screens can help researchers and farmers evaluate their screens and make pre-design decisions that suit their investment capabilities.

• Journal of Environmental Policy
• /
• v.11 no.4
• /
• pp.85-105
• /
• 2012

In this paper, the energy efficiency of wastewater utilities was evaluated to explore ways to save energy via operational measures. The correlation of each wastewater characteristic parameter to energy was assessed to find a set of parameters that explained most of the variations in energy use among utilities. The results show that increases in inflow, influent COD concentration, and ratio of advanced treatment generally increased the energy use. On the other hand, increases in load factor (influentaverage flow/design flow) reduced the energy use. In the regression analysis, the energy efficiency was highest in the A2O advanced process. On the other hand, the membrane process (among the advanced processes) and the contacted aeration process (among the secondary processes) require more efforts in saving energy. However, the data base system related to energy use must be supplemented in order for more accurate analysis of energy consumption in wastewater treatment facilities. In particular, i) electricity consumption of relay pumps and, ii) energy usage per unit process, iii) pump power usage to discharge treated wastewater in a long distance, if necessary, and iv) alternative energy production and utilization status must be recorded. By utilizing the results of the analysis conducted in this study, it is possible to quantify a level of energy savings needed and establish customized energy saving measures to achieve a certain target level for benchmarking a successful case of wastewater utilities.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.783-795
• /
• 2017

This study measured consumer's recognition, reliability, emotion and images about current eco-marks as well proposed an eco-mark rating scale and mark designs to improve consumer's trust on the fashion product marks. We used a questionnaire survey to collect data from 150 persons about knowledge, interests, and practice on eco fashion products in relation to trustfulness and positive images for three domestic and three international eco-marks. We evaluated and gave eco scores to six fiber-type products (cotton, organic cotton, wool, polyester, biodegradable polyester and nylon) in terms of consumer's use, water & land consumption, waste amount, carbon footprint, and toxicity. We suggested a new 5-level rating scale for eco marks, which quantified the concept of environmental friendliness of fiber products. The design for eco-mark of rating scale showed the total grade with two sub scores of environmental sides and human sides developed with an improved visual understanding for consumers. The design is one through benchmarking the energy-consumption efficiency mark, which is familiar to consumers such as a half circle shape to save environment resources to alarm consumers to environment problems.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.183-191
• /
• 2015

Studies on the environment-friendly and permanent low energy saving measure are and will continue to be an eternal challenge. However, the demand is high for the technologies that can save energy significantly in everyday life that produce tangible benefits for the users by applying saving factors and that anyone can access easily when it comes the related procedure. Government policies related to the improvement of energy effect in the existing building structure are characterized by complex procedure. Moreover, cost required and reliability issue emerge when request is made to an expert. Accordingly, this study seeks to present energy improvement plan that can be utilized simply and conveniently at any place, any time by enabling customized design according to individual taste by enabling energy change amount and grade prediction when the users select only the part that they want to replace by using a simple program.

• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.69-78
• /
• 2007

In recent years, embedded mobile systems have been expanding their application domains from embedded portable devices which only execute a specialized application such as MP3 player or digital camcoder to digital convergence devices which execute more complicated applications converged various functionalities such as video and audio play, digital dictionary, DMB, games, phone, etc. As it requires the increasing hardware performance such as more faster CPU and more larger RAM, display, disk size, it has brought about a corresponding increase in power consumption. However, coupled with relatively small gains in battery capacity over recent years, the importance of software architecture including intelligent power management has become paramount. In this paper, we have ported UbiFOSTM with energy saving techniques on the ARM9-based MBA2440 platform. For energy savings, we adapted the dynamic power management and the device power management schemes based on monitoring workload. Experimental results with some well-known applications show that proposed low power technique could save energy up to 24 %.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.307-313
• /
• 2021

Most of the stores of small business owners are those that use a large number of electrical devices, and in particular, there are many stores that use a cold storage system. In severe cases, there is a lot of power load on the store, which can cause a loss to the assets in the store as the power supply is cut off. Accordingly, in this paper, an LSTM-based power load prediction system was designed to measure the energy demand rate of stores and to save energy. Since it can be used as a data-based power saving system for small and medium-sized stores, it is expected to be used as a data-based power demand prediction system for small businesses in the future, and to be used in the field of preventing damage due to power load.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.89-95
• /
• 2008

In this paper, we designed a low power face detection hardware and analysed its power consumption. The face detection hardware was fabricated using Samsung 0.18um CMOS technology and it can detect multiple face locations from a 2-D image. The hardware is composed of 6 functional modules and 11 internal memories. We introduced two operating modes(SLEEP and ACTIVE) to save power and a clock gating technique was used at two different levels: modules and registers. In additional, we divided an internal memory into several pieces to reduce the energy consumed when accessing memories, and fully utilized low power design option provided in Synopsis Design Compiler. As a result, we could obtain 68% power reduction in ACTIVE mode compared to the original design in which none of the above low power techniques were used.

• Journal of Bio-Environment Control
• /
• v.32 no.3
• /
• pp.181-189
• /
• 2023

Hydrogen has gained attention as an environmentally friendly energy source among various renewable options, however, its application in agriculture remains limited. This study aims to apply the hydrogen fuel cell triple heat-combining system, originally not designed for greenhouses, to greenhouses in order to save energy and reduce greenhouse gas emissions. This system can produce heating, cooling, and electricity from hydrogen while recovering waste heat. To implement a hydrogen fuel cell triple heat-combining system in a greenhouse, it is crucial to evaluate the greenhouse's heating and cooling load. Accurate analysis of these loads requires considering factors such as greenhouse configuration, existing heating and cooling systems, and specific crop types being cultivated. Consequently, this study aimed to estimate the cooling and heating load using building energy simulation (BES). This study collected and analyzed meteorological data from 2012 to 2021 for semi-enclosed greenhouses cultivating tomatoes in Jeonju City. The covering material and framework were modeled based on the greenhouse design, and crop energy and soil energy were taken into account. To verify the effectiveness of the building energy simulation, we conducted analyses with and without crops, as well as static and dynamic energy analyses. Furthermore, we calculated the average maximum heating capacity of 449,578 kJ·h^-1 and the average cooling capacity of 431,187 kJ·h^-1 from the monthly maximum cooling and heating load analyses.