• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.7-17
• /
• 2016

The present study experimentally considers dynamic performance of large floating wave-offshore hybrid power generation platform in extreme conditions. In order to evaluate the motion performance of the large floating hybrid power generation platform, 1/50 scaled model was manufactured. A mooring line was also manufactured, and free-decay and static pull-out tests were carried out to check the mooring model. A mooring line table was introduced to satisfy the water depth, and environmental conditions were checked. Motion responses in regular waves were measured and complicated environmental conditions including wave, wind, and current were applied to see the dynamic performance in extreme/survival conditions. Maximum motion and acceleration were judged following the design criteria, and maximum offset and mooring tension were also checked based on the rule. The characteristics of hybrid power generation platform are discussed based on these data.

• Proceedings of the Korea Database Society Conference
• /
• 2010.06a
• /
• pp.33-41
• /
• 2010

Recently the number of IT equipment have increased. It consumes large amounts of energy and is emissions of greenhouse gases. Co2 emissions with the PC and the monitor has the highest percentage to 39% more than other IT equipment. In addition, Plan for your PC's power management and technology development is being pursued in developed countries. To reduce energy costs of organizations with large numbers of the PC and to cut down on Co2 emissions, the energy load control technology of ACPI standards-based PC IS suggested. AMI-based PC power-management system was constructed, Approximately 20% of operating a result of the test power consumption was reduced. Looking at the case of the United States, PC monitors from the University of Wisconsin-Oshkosh was Sleep mode. As a result, the monitor on a, $ 20 for a year reduced energy costs. In GE(General Electronic), Approximately 75,000 PC's power setting time was Monitor Off :15 minutes/ Hard Drives Off 30 minutes/ System Standby 30 minutes/ Hibernation mode 2 hours. 1 year, electric bill was $ 2.5 million savings and 3 years electric bill was $ 6.5 million savings. Measuring energy usage data, using the measured data, electric energy management technology is not. Platform development to measure energy usage for Individual energy-consuming equipment is urgently required.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.70-79
• /
• 2015

In this paper, enhanced stand-alone operation and development of Matlab/Simulink model of emergency diesel based hybrid energy system is presented. Simulations based on the remote community or islands were performed for PV-diesel-battery hybrid system. Modeling of PV-diesel-battery integrated system is done to perform under the solar radiation and load conditions on Matlab/Simulink platform. The models of diesel generator unit, battery energy storage system, PV and frequency-power control are developed and simulation studies have been carried out under various conditions using Matlab/Simulink and SimPowerSystem. It is demonstrated that the proposed system can provide reliable and good quality power to the customers in diesel synchronous generator-based hybrid energy systems.

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.613-618
• /
• 2018

We are developing a shared remote control mobile robot for aerial work in nuclear power plants (NPPs); a robot consists of a mobile platform, a telescopic mast, and a dual-arm slave with a working tool. It is used at a high location operating the manual operation mechanism of a fuel changer of a heavy water NPP. The robot system can cut/weld a pipe remotely in the case of an emergency or during the dismantling of the NPP. Owing to the challenging control mission considering limited human operator cognitive capability, some remote tasks require a shared control scheme, which demands systematic software design and integration. Therefore, we designed the architecture of the software systematically.

• Journal of Distribution Science
• /
• v.13 no.12
• /
• pp.95-103
• /
• 2015

Purpose - The Visegrád Group cooperation of the past 14 years and that of V4 for the past 20 years has very important significance in the 21st century that must be maintained. This cooperation is valuable because of the trade routes that connect northern Poland to the Balkans in southern Croatia, which forman important basis for the resuscitation of Central European development. Currently, because of the European manufacturing base and industrial development, an energy supply and stable energy distribution networks have been introduced to secure cooperation and not competition within the Visegrád Group. This paper's research emphasizes the supply chain hub in neighboring countries. Although Central and Eastern European countries are small, they can provide a competitive response to Western Europe if they collaborate with the V4 group and other countries. Research design, data, and methodology - The subjects of this study in the Visegrád Group area are related to the development of Marketing and Distribution Sciences in the integrated European Union. In relation to the existing energy infrastructure, construction companies and financial institutions benefit from large-scale construction projects. Existing or new infrastructure facilities among the V4 must comply with the preconditions of regional energy markets. The network of emerging markets is changing into a European-logistics hub of new markets. This hub is closely associated with the economic development of European self-sustainment given that energy for distribution and consumption is imported from Russia. Therefore, this paper indirectly provides data on the regional distribution of energy as alternative bases in Europe for market expansion to Asia. Results - As a result, it appeared unlikely that V4 failed to implement homogeneity following the standards of Western Europe, as proposed by the EU. Throughout European history, individuals have gathered in Central Europe as an innovation hub. Currently, the region is being established independently for energy industrial development and not for tourism development, and is expected to play a central role in innovation and distribution consumption. Therefore, similar to Western and Northern Europe, V4 only appears to engage in distribution consumption on the basis of the identity that it formed for itself. This area is expected to either create a regional platform or a voice over a single economic policy. Conclusions - To this end, regarding the distribution of consumer groups within and outside the region, the V4 group is expected to be established for various policy areas and as a Eurasian outpost of trade and distribution logistics. In addition, given its purpose of engaging in the distribution of energy cooperation and trade clusters, the Visegrád Group will be in charge of the center axis of the bridge for distribution logistics trading partners from the Western Balkans to Caucasus and Eastern Europe. Thus, the Visegrád Group is entering this region as a platform for market share by enabling all or any investor can gain greater industrial benefits.

• Ocean Systems Engineering
• /
• v.4 no.4
• /
• pp.263-278
• /
• 2014

The spudcan requires the suitable design considering the soil, platform, and environmental conditions. Its shape needs to be designed to secure sufficient reaction of soil so that it can prevent overturning accidents. Its shape also has to minimize the installation and extraction time. Even in the same soil condition, the reaction of soil may be different depending on the shape of spud can, mainly the slope of top and bottom plates. Therefore, in this study, the relation between the slope of plates and the reaction of soil with and without water jetting is analyzed to better understand their interactions and correlations. For the investigation, a wind turbine installation jack-up rig (WTIJ) is selected as the target platform and the Gulf of Mexico is considered as the target site. A multi layered (sand overlying two clays) soil profile is applied as the assumed soil condition and the soil-structure interaction (SSI) analysis is performed by using ANSYS to analyze the effect of the slope change of the bottom plate and water jetting on the reaction of soil. This kind of investigation and simulation is needed to develop optimal and smart spudcan with water-jetting control in the future.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1678-1684
• /
• 2007

Platform Screen Door(PSD) has been installed in train manual operation section(ATS/ATC) by SeoulMetro since 2005. PSDs are now operating at 17 stations in SeoulMetro lines. As a result, it increases the safety of passenger, makes a comfortable platform and saves the energy of air conditioning. For PSD operation, train shall stop within 600mm of the train stop reference point. In train manual operation section, the detection system of train position is required to notify the train driver of train position and to ensure the condition that train stops the correct position for PSD operation. To detect the train stop position, the optical sensor shall be installed at platform. However, in case of SeoulMetro lines, the detection criterions of the train correct position stop are different because of using various types of trains which have different size and shape of front cars. In this paper, to solve this problem, the precise detection algorithm of the train stop at the correct position is used, and Laser distance measure sensor is introduced to notify the distance form the reference point of the train correct stop to train driver. This system has been applying to Seoul Metro line total.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1B
• /
• pp.9-18
• /
• 2006

Advances in wireless network are enabling the development of ubiquitous multimedia services. These multimedia services need efficient platforms to comply with the requirements of mobile computing. We introduce an adaptive service platform based on mobile agent and grid systems while specifying the challenges of ubiquitous multimedia services and focusing on frequent disconnections and scarce resources. We applied our platform to framework RtoA (Ready-to-Attend) which supports mobile users to access compute-intensive multimedia service, specifically, mobile education and video conferencing. RtoA includes hand-off, speaker and listener service which enable people to attend a conference or a class with satisfying quality of multimedia service. ns-2 based simulation verifies that our scheme is an efficient way to reduce energy consumption of mobile devices and to improve the response time of mobile applications.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.3
• /
• pp.255-262
• /
• 2015

The present study developed a numerical simulation tool for the coupled dynamic analysis of multiple turbines on a single floater (or Multiple Unit Floating Offshore Wind Turbine (MUFOWT)) in the time domain, considering the multiple-turbine aero-blade-tower dynamics and control, mooring dynamics, and platform motions. The numerical tool developed in this study was designed based on and extended from the single-turbine analysis tool FAST to make it suitable for multiple turbines. For the hydrodynamic loadings of floating platform and mooring-line dynamics, the CHARM3D program developed by the authors was incorporated. Thus, the coupled dynamic behavior of a floating base with multiple turbines and mooring lines can be simulated in the time domain. To investigate the effect of asymmetric aerodynamic loading on the global performance and mooring line tensions of the MUFOWT, one turbine failure case with a fully feathered blade pitch angle was simulated and checked. The aerodynamic interference between adjacent turbines, including the wake effect, was not considered in this study to more clearly demonstrate the influence of the asymmetric aerodynamic loading on the MUFOWT. The analysis shows that the unbalanced aerodynamic loading from one turbine in MUFOWT may induce appreciable changes in the performance of the floating platform and mooring system.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.516-525
• /
• 2008

This paper proposes a compact, energy-efficient, and smart gas sensor platform technology for ubiquitous sensor network (USN) applications. The compact design of the platform is realized by employing silicon-on-insulator (SOI) technology. The sensing element is fully integrated with SOI CMOS circuits for signal processing and communication. Also, the micro-hotplate operates at high temperatures with extremely low power consumption, which is important for USN applications. ZnO nanowires are synthesized onto the micro-hotplate by a simple hydrothermal process and are patterned by a lift-off to form the gas sensor. The sensor was operated at $200^{\circ}C$ and showed a good response to 100 ppb $NO_2$ gas.