• 제목/요약/키워드: Energy Partitioning

검색결과 96건 처리시간 0.027초

Photodissociation of C3H5Br and C4H7Br at 234 nm

  • Kim, Hyun-Kook;Paul, Dababrata;Hong, Ki-Ryong;Cho, Ha-Na;Lee, Kyoung-Seok;Kim, Tae-Kyu
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권1호
    • /
    • pp.143-148
    • /
    • 2012
  • The photodissociation dynamics of cyclopropyl bromide ($C_3H_5Br$) and cyclobutyl bromide ($C_4H_7Br$) at 234 nm was investigated. A two-dimensional photofragment ion-imaging technique coupled with a [2+1] resonanceenhanced multiphoton ionization scheme was utilized to obtain speed and angular distributions of the nascent $Br(^2P_{3/2})$ and $Br^*(^2P_{1/2})$ atoms. The recoil anisotropies for the Br and $Br^*$ channels were measured to be ${\beta}_{Br}=0.92{\pm}0.03$ and ${\beta}_{Br^*}=1.52{\pm}0.04$ for $C_3H_5Br$ and ${\beta}_{Br}=1.10{\pm}0.03$ and ${\beta}_{Br^*}=1.49{\pm}0.05$ for $C_4H_7Br$. The relative quantum yield for Br was found to be ${\Phi}_{Br}=0.13{\pm}0.03$ and for $C_3H_5Br$ and $C_4H_7Br$, respectively. The soft radical limit of the impulsive model adequately modeled the related energy partitioning. The nonadiabatic transition probability from the 3A' and 4A' potential energy surfaces was estimated and discussed.

Effect of Nonstarch Polysaccharide-Rich By-Product Diets on Nitrogen Excretion and Nitrogen Losses from Slurry of Growing-Finishing Pigs

  • Canh, T.T.;Verstegen, M.W.A.;Mui, N.B.;Aarnink, A.J.A.;Schrama, J.W.;Van't Klooster, C.E.;Duong, N.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권4호
    • /
    • pp.573-578
    • /
    • 1999
  • An experiment was conducted to investigate the effect of diet for growing-finishing pigs with high level of non-starch polysaccharides (NSP) from by-products on nitrogen excretion and nitrogen losses from slurry during storage. Sixteen commercial crossbred barrows of about 68 kg BW were randomly allotted to one of four diets. The control diet was formulated using tapioca and rice as basal energy sources. In the other diets, tapioca was replaced by either coconut expellar, rice bran or beer by-product. The diets differed mainly in the amount and compostition of NSP. After a 12-day adaptation period, urine and faeces were collected separately in metabolism cages for 9 days. Urine and faeces from the first four days were used to analyse the nitrogen partitioning. Urine and faeces from the last 5 days were mixed as slurry. The slurry was sampled at the end of the collection period and again after 30 days storage, to analyse for nitrogen to calculate the losses. Increasing dietary NSP reduced urinary nitrogen and nitrogen losses from the slurry during storage. The pigs fed the diet based on beer by-product excreted the most nitrogen via faeces and the least nitrogen via urine. Nitrogen losses from slurry of pigs fed the beer by-product were from 34 to 65% lower than from the other three diets. It is concluded that including NSP-rich by-products in the diet of growing-finishing pigs reduces urinary nitrogen excretion and nitrogen losses from slurry during storage.

WSN환경에서 센서노드의 생명주기 연장을 위한 고정 분할 기법 (Fixed Partitioning Methods for Extending lifetime of sensor node for Wireless Sensor Networks)

  • 한창수;조영복;우성희;이상호
    • 한국정보통신학회논문지
    • /
    • 제20권5호
    • /
    • pp.942-948
    • /
    • 2016
  • WSN은 센서 노드에 의해 구성된 네트워크로, 센서 노드는 한번 배치되면 재충전하거나 위치적으로 재배치가 불가능하다. 또한 센서노드들은 제한된 에너지를 가지고 통신에 참여하게 된다. 그러나 기존 제안되었던 클러스터링 기법들은 불균일한 분포로 배치된 WSN환경에 적용 시 지역적 특징으로 통신 단절이 발생되는 문제점으로 네트워크의 신뢰성에 문제점을 갖는다. 따라서 제안 알고리즘에서는 WSN환경에서 센서노드의 불균형 배치를 고려해 센서필드를 분할하고 분할영역의 센서노드 밀집도에 따라 고정, 정적, 동적 클러스터링 알고리즘을 선별적으로 적용함으로 센서노드의 통신 참여율을 25% 향상시켰다. 그리고 전체 네트워크 생명주기는 14%연장하여 네트워크의 신뢰성을 보장하였다.

필터방식 얼굴검출 하드웨어의 저전력 설계 (Low Power Design of Filter Based Face Detection Hardware)

  • 김윤구;정용진
    • 대한전자공학회논문지SD
    • /
    • 제45권6호
    • /
    • pp.89-95
    • /
    • 2008
  • 본 논문에서는 필터방식 얼굴검출 하드웨어를 저전력 설계하고 그에 따른 전력 소모량을 분석하였다. 얼굴검출 하드웨어는 입력되는 영상에서 얼굴의 위치를 검출하며 내부적으로 6개 모듈과 11개의 모듈 간 버퍼가 삽입되어 각 모듈이 순환 연산한다. 따라서 저전력 설계를 위해 SLEEP 모드와 ACTIVE 모드를 적용하였고, 해당 하드웨어에 모듈별 그리고 레지스터별 클럭게이팅(Clock Gating) 기술을 적용하였다. 추가적으로 모듈간 버퍼는 메모리 파티션을 통해 메모리에서 소비하는 전력양을 줄였으며 게이트 레벨에서도 저전력 설계 기술(Gate level power optimization)을 적용하였다. 이는 삼성 0.18um 공정의 STD130 라이브러리를 사용하여 Synopsis(사)의 Power-Compiler를 통해 구현되었으며 동사의 Prime-Power에 의해 소비 전력량을 측정하였다. 그 결과 저전력 설계 기술을 적용하기 전과 비교하여 ACTIVE 모드일 경우 약 68%의 전력 소모를 줄였다.

구형 위상구조 모델에 대한 볼륨메쉬 파라메터화 (Volume Mesh Parameterization for Topological Solid Sphere Models)

  • 김준호;이윤진
    • 한국콘텐츠학회논문지
    • /
    • 제10권4호
    • /
    • pp.106-114
    • /
    • 2010
  • 메쉬 파라메터화는 입력으로 들어온 메쉬와 파라메터 영역 사이의 부드러운 일대일 대응함수를 구하는 것으로, 삼차원 스캐너를 통해 획득한 디지털 형상을 여러 가지 응용문제에 활용하기 위해 필요한 디지털 형상 처리의 핵심기반기술이다. 본 논문에서는 구형 위상구조를 가지는 삼차원 물체에 대해, 표면뿐만 아니라 내부를 포함한 물체 전체를 단일 입방정육면체로 하모닉 매핑하는 새로운 삼차원 볼륨파라메터화 방법을 제안한다. 제안하는 방법은 입력으로 들어온 볼륨메쉬의 표면을 정육면체와 동일한 위상구조를 가지는 여섯 개의 영역으로 나누고, 이를 이용하여 볼륨 파라메터화의 경계조건을 계산한다. 이후 경계조건을 만족하며 볼륨 내부의 하모닉 에너지를 최소화하는 하모닉 매핑을 계산하여 물체 내부까지 왜곡이 적은 삼차원 파라메터화 결과를 얻어낸다. 실험결과를 통해, 본 논문에서 제안하는 방법을 통해 다양한 구형 삼차원 모델에 대해 삼차원 볼륨파라메터화 결과를 효과적으로 얻을 수 있음을 확인하였다.

Domain decomposition technique to simulate crack in nonlinear analysis of initially imperfect laminates

  • Ghannadpour, S. Amir M.;Karimi, Mona
    • Structural Engineering and Mechanics
    • /
    • 제68권5호
    • /
    • pp.603-619
    • /
    • 2018
  • In this research, an effective computational technique is carried out for nonlinear and post-buckling analyses of cracked imperfect composite plates. The laminated plates are assumed to be moderately thick so that the analysis can be carried out based on the first-order shear deformation theory. Geometric non-linearity is introduced in the way of von-Karman assumptions for the strain-displacement equations. The Ritz technique is applied using Legendre polynomials for the primary variable approximations. The crack is modeled by partitioning the entire domain of the plates into several sub-plates and therefore the plate decomposition technique is implemented in this research. The penalty technique is used for imposing the interface continuity between the sub-plates. Different out-of-plane essential boundary conditions such as clamp, simply support or free conditions will be assumed in this research by defining the relevant displacement functions. For in-plane boundary conditions, lateral expansions of the unloaded edges are completely free while the loaded edges are assumed to move straight but restricted to move laterally. With the formulation presented here, the plates can be subjected to biaxial compressive loads, therefore a sensitivity analysis is performed with respect to the applied load direction, along the parallel or perpendicular to the crack axis. The integrals of potential energy are numerically computed using Gauss-Lobatto quadrature formulas to get adequate accuracy. Then, the obtained non-linear system of equations is solved by the Newton-Raphson method. Finally, the results are presented to show the influence of crack length, various locations of crack, load direction, boundary conditions and different values of initial imperfection on nonlinear and post-buckling behavior of laminates.

A Bi-objective Game-based Task Scheduling Method in Cloud Computing Environment

  • Guo, Wanwan;Zhao, Mengkai;Cui, Zhihua;Xie, Liping
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제16권11호
    • /
    • pp.3565-3583
    • /
    • 2022
  • The task scheduling problem has received a lot of attention in recent years as a crucial area for research in the cloud environment. However, due to the difference in objectives considered by service providers and users, it has become a major challenge to resolve the conflicting interests of service providers and users while both can still take into account their respective objectives. Therefore, the task scheduling problem as a bi-objective game problem is formulated first, and then a task scheduling model based on the bi-objective game (TSBOG) is constructed. In this model, energy consumption and resource utilization, which are of concern to the service provider, and cost and task completion rate, which are of concern to the user, are calculated simultaneously. Furthermore, a many-objective evolutionary algorithm based on a partitioned collaborative selection strategy (MaOEA-PCS) has been developed to solve the TSBOG. The MaOEA-PCS can find a balance between population convergence and diversity by partitioning the objective space and selecting the best converging individuals from each region into the next generation. To balance the players' multiple objectives, a crossover and mutation operator based on dynamic games is proposed and applied to MaPEA-PCS as a player's strategy update mechanism. Finally, through a series of experiments, not only the effectiveness of the model compared to a normal many-objective model is demonstrated, but also the performance of MaOEA-PCS and the validity of DGame.

광릉 활엽수림과 침엽수림에서 에디공분산으로 관측한 하부 군락의 증발산 (Understory Evapotranspiration Measured by Eddy-Covariance in Gwangneung Deciduous and Coniferous Forests)

  • 강민석;권효정;임종환;김준
    • 한국농림기상학회지
    • /
    • 제11권4호
    • /
    • pp.233-246
    • /
    • 2009
  • 증발산(ET)을 증발(E)과 증산(T)으로 배분하는 것은 물 순환과 에너지, 물 및 탄소 순환의 연결고리를 이해하는 데에 매우 중요하다. 산림 군락의 총 증발산은 상부 및 하부 군락의 증산과 토양 및 차단 강수로부터의 증발로 구성된다. 이들의 상대적 기여도를 정량화하기 위해, 에디 공분산 방법을 사용하여 2008년 6월 1일부터 2009년 5월 31일까지 광릉 활엽수림과 침엽수림의 마루에서의 증발산을 관측하였다. 스펙트럼 분석에 따르면, 초음파 풍향 풍속계와 수증기 농도 측정기 사이의 거리에 의한 증발산 과소 평가는 군락 하부에서 연간 증발산량의 약 10%정도였다. 하부군락의 연간 증발산은 활엽수림과 침엽수림에서 각각 59mm와 43mm로, 총 증발산량의 16%와 7%를 차지하였다. 전반적으로 식생면적지수가 최대인 여름 기간을 제외하고는 하부군락의 증발산은 총 증발산에서 무시할 수 없는 부분을 차지하였다. 두 산림지역의 비결합 모수($\Omega$)는 약 0.15이었으며, 이는 하부군락의 증발산이 주로 포차나 토양 수분에 의해서 조절됨을 보여준다. 두 산림의 하부 군락의 증발산의 차이는 군락 하부의 환경 조건의 차이에 기인하며, 특히 습도와 토양 수분의 차이로 인해 발생하였다. 광릉 하부 군락의 증발산 기여도가 작지 않다는 사실은 이러한 산림의 물질과 에너지 플럭스를 해석하고 모델링하기 위해서는 이원 또는 다층 모형이 필요함을 시사한다.

감자밭의 재생종이 및 흑색 플라스틱 필름 멀칭에 따른 지표면 에너지 수지와 토양온도의 변화 (Soil Surface Energy Balance and Soil Temperature in Potato Field Mulched with Recycled-Paper and Black Plastic Film)

  • 최일선;이변우
    • 한국작물학회지
    • /
    • 제46권3호
    • /
    • pp.229-235
    • /
    • 2001
  • 사용된 멀칭자재의 광학적 특성, 작물군락의 형성 등에 의하여 토양표면의 에너지 수지는 달라지며, 이러한 토양표면 에너지 수지의 차이에 의해 변화되는 지중열류가 토양온도 변화의 원인이 된다. 본 연구에서는 일사량, 밀칭표면의 순복사, 지중열류, 멀칭 내외면 온도, 토양온도 등을 연속적으로 측정하였으며, 실측된 자료를 이용하여 토양표면의 에너지 수지 및 지중열류를 추정하여 멀칭처리에 따른 토양온도 변화의 원인을 분석하였다. 감자 출아전인 1998년 8월 30일의 무멀칭처리에서는 지표면의 순복사(10.0 MJ$m^{-2}$${day}^{-1}$ )는 높았지만, 대류에 의한 현열이나 수분증발에 의한 잠열로 대부분의 에너지(9.65MJ m$^{-2}$ day$^{-1}$)가 지면으로부터 빠져나가 토양으로 흐르는 지중열류는 0.36MJ $m^{-2}$${day}^{-1}$ 이었다. 흑색 폴리에틸렌 필름 멀칭에서는 지표면의 순복사는 2.4 MJ $m^{-2}$${day}^{-1}$ 이었지만 멀칭면과 토양표면의 대류에 의한 지표면의 에너지 손실이 1.39 MJ $m^{-2}$${day}^{-1}$ 로 적어져 지중열류는 1.02 MJ$m^{-2}$${day}^{-1}$ 로 무멀칭처리보다 많이 높았다. 종이멀칭처리에서의 지표면의 순복사는 1.30 MJ $m^{-2}$${day}^{-1}$ 로 다른 처리에 비해 낮았고, 멀칭면과 지표면의 대류에 의한 에너지 교환에 의하여 지표면으로부터 1.36 MJ $m^{-2}$${day}^{-1}$ 의 에너지가 손실되어 지중열류는 -0.06 MJ $m^{-2}$${day}^{-1}$ 로 흑색 폴리에틸렌 필름 멀칭이나 무멀칭보다 낮았으며, 특히 주간의 상위층 토양온도가 다른 처리에 비해 많이 낮아졌다. 군락이 형성된 9월 27일의 경우, 멀칭처리에서의 지표면 순복사는 군락이 없는 8월 30일의 경우와 큰 차이가 없었지만 무멀칭처리에서는 군락의 일사 차단으로 순복사가 현저히 낮아졌으며, 흑색 플라스틱 필름 멀칭처리에서는 현열 및 잠열에 의한 손실이 작아 지중열류는 다른 처리에 비해 높았으며, 무멀칭처리에서는 현열 및 잠열에 의한 에너지 손실이 많아 지중열류는 작았다. 이러한 지중열류의 차이에 의해 흑색 플라스틱 필름 별칭처리에서의 지온이 다른 처리에 비해 높아졌고, 종이멀칭처리에서의 지온은 군락이 형성되지 않은 초기에는 무멀칭에 비해 낮았지만 군락이 형성된 후기에는 그 차이가 거의 없었다. 군락의 형성여부와 관계없이 일 최저기온 및 최고기온이 나타나는 시각의 토심에 따른 토양온도의 변화는 비슷한 경향을 보였으며, 일 최고기온이 나타나는 시각에 흑색 플라스틱 필름 멀칭처리에서의 온도는 지표에 가까울수록 급격하게 높았으며, 그 증가추세는 종이멀칭이나 무멀칭에 비해 현저하였다.

  • PDF

Noah Multi Physics 모델과 CERES-Rice 모델의 작물 생육 및 증발산 모의 비교 (Comparison of Crop Growth and Evapotranspiration Simulations between Noah Multi Physics Model and CERES-Rice Model)

  • 김광수;강민석;정하늘;김준
    • 한국농림기상학회지
    • /
    • 제15권4호
    • /
    • pp.282-290
    • /
    • 2013
  • 대기와 지표면을 구성하고 있는 토양 및 식생은 생물리학적/생지화학적인 과정을 통해 서로 상호작용을 한다. 이러한 과정을 모의하기 위해 지표모델과 작물 생육모델이 사용되고 있다. 지표모델인 Noah MP 모델과 작물생육모델인 CERES-Rice 모델을 비교하기 위해 해남 플럭스 관측소 인근 지역에서 작물의 생육과 증발산량을 모의하였다. 플럭스 관측자료가 수집된 2003년부터 2012년까지 해남 플럭스 관측소의 주요 식생인 벼를 대상으로 생육과 증발산량을 모의되었다. Noah MP 모델은 단순한 식생 모의 과정으로 인해 개화기를 전후로 하는 벼의 LAI 변화양상을 정확하게 반영하지 못하였다. 벼의 생체중 예측에 있어서도 실제 관측될 수 있는 생체중보다 대략 10분의 1 수준에 해당하는 생체중이 모의되었다. 증발산량 모의의 경우에도, CERES-Rice 모델의 모의값보다 약 21%에 해당하는 증발산량을 모의하였다. 반면, CERES-Rice 모델의 경우 LAI의 변화와 생체중 모의 값은 실제의 벼 생육 양상과 유사할 것으로 추정되었다. 또한, 증발산량의 경우에도 해남 플럭스 관측소에서 측정된 값과 비교하였을 때 Noah-MP모델의 모의값이 CERES-Rice 모델의 모의값에 비해 RMSE 값이 1.8배 높았다. Noah MP 모델이 보이는 높은 오차값들은 Noah MP모델이 논의 지표상태를 적절히 반영하지 못하였기 때문으로 사료되었고, 특히 과소추정된 생체중을 보정하여 증발산량을 예측할 경우 오차를 30%까지 줄일 수 있을 것으로 보인다. 따라서, Noah MP 모델에 논에서의 지표 특성을 반영할 수 있다면 보다 정확한 물질순환과 에너지 교환을 예측할 수 있을 것으로 사료된다.