• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.527-528
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.596-598
• /
• 2006

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.266-269
• /
• 2009

Iron-based soft magnetic materials are widely used as cores, such as transformer transformers, motors, and generators. Reducing losses generated from soft magnetic materials of these applications results in improving energy conversion efficiency. Recently, the new P/M soft magnetic material realized an energy loss of 68 W/kg with a drive magnetic flux of 1 T, at a frequency of 1 kHz, rivaling general-purpose electromagnetic steel sheet in the low frequency range of 200 Hz to 1 kHz. In this research, the effect of rolling parameters on soft magnetic properties of Fe-based powder cores was investigated. The Fe-based soft magnetic plates were produced by the hot powder rolling process after both pure Fe and Fe-4%Si powders were canned, evacuated, and sealed in Cu can. The soft magnetic properties such as energy loss and coercive power were measured by B-H curve analyzer. The soft magnetic properties of rolled sheets were measured under conditions of a magnetic flux density of 1 T at a frequency of 200 kHz. It was found that rolling reduction ratio is the most effective parameter on reducing both energy loss and coercivity because of increasing aspect ratio with reduction ratio. By increasing aspect ratio from 1 to 9 through hot rolling of pure Fe powder, a significant loss reduction of one-third that of SPS sample was achieved.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.141-149
• /
• 1993

수력에너지 생산량은 추계학적인 저수지 유입량에 지배되므로 전력량 판매 계약에는 이를 반영하여 합리성을 보장해야 할 필요가 있다. 본 연구에서는 유입량의 신뢰도별로 저수지조작(貯水池操作)을 수행하여 최적 신뢰도 및 이에 따른 최적 전력 판매계약량을 결정하는 방법을 제시하였다. 목적함수에는 전력생산량이 신뢰도를 벗어나는 위험에 대한 손실함수를 도입하고, 손실계수의 범위를 제시하였다. 여기서 손실은 계약량을 공급하지 못할 경우 지불해야 할 벌칙량을 의미하고 신뢰도는 저수지 유입량에 대한 초과 확률과 같고, 이 때 확률밀도함수는 대수정규분포를 5% 유의수준에서 채택하였다. 최적의 신뢰도를 결정하기 위하여 오목함수 범위에서 황금비 조사 기법을 썼으며, 신뢰도별 최대 수력 에너지를 얻기 위해 증분 동적계획 기법으로 저수지 조작을 수행하였다. 본 연구의 적용대상으로 대청 다목적댐 및 수력발전소를 택하여 손실계수, 최적 신뢰도 및 계약 발전량을 구하였다.

• 에너지공학
• /
• 제26권3호
• /
• pp.71-77
• /
• 2017

피동고압충수용 혼합형 안전주입탱크 (Hybrid SIT)의 압력평형시간은 냉각수 주입시기를 결정하는 주요인자이다. 한국원자력연구원 (KAERI)에서는 Hybrid SIT에서의 내부 열수력적 거동을 고찰하기 위해 개별효과시험 장치를 구축하였으며, 다양한 운전조건에서의 압력평형시간에 대한 민감도 시험을 수행하였다. 개별효과시험을 통해 압력평형시간을 결정하는 주요인자들을 도출하였으며, 그 중 증기의 벽면응축 및 냉각재와의 직접접촉응축이 압력평형시간을 결정하는 주요 현상임을 파악하였다. 본 연구에서는 개별효과 시험결과들을 이용하여 각각의 응축현상들이 압력평형에 미치는 영향을 정량적으로 분석하고 혼합형 SIT의 압력평형시간을 예측하기 위한 방법론을 제시하였다.

• 설비공학논문집
• /
• 제28권12호
• /
• pp.483-488
• /
• 2016

In this study, we chose the rural house as a standard model. In order to review the energy difference of cooling and heating loads, we changed the thermal transmittance standards. By using the thermal transmittance standard in 2011 as the Basic CASE, the thermal transmittance standard in 2013 as well as 2016, and the thermal transmittance standard of passive houses, we compared the results with regard to the cooling and heating energy load. Because of the heat loss, it can be confirmed that with an improved thermal performance of the building structure, the maximum increase of the cooling energy load was 36 kWh from June to September. Because of the heat loss, it was also confirmed that with the improved thermal performance of a building structure, the maximum decrease of the heating energy load is 1,498 kWh from November to April. Even though the heat loss of the building structure could decrease the cooling energy load by improving thermal transmittance standards in Korea, the energy saving performance is worse than the situation of heating energy load in heating period. Compared with CASE 1 and CASE 2, as well as CASE 1 and CASE 3, we CASE 3 was found to have the best energy saving rate when compared to the other cases : CASE 3 increased by 1,452 kWh and CASE 2 by 588 kWh, because the window thermal transmittance standard of 2016 was added.

• The Journal of the Acoustical Society of Korea
• /
• 제21권4E호
• /
• pp.164-169
• /
• 2002

This paper proposes a hybrid method for vibration analysis in the medium to high frequency ranges using Power Flow Analysis (PFA) algorithm and Statistical Energy Analysis (SEA) coupling concepts. The main part of the developed method is the application of coupling loss factor (CLF) suggested in SEA to the power transmission, reflection coefficients in PI' A boundary conditions. The developed hybrid method shows very promising results with regard to the applications for the various damping loss factors in wide frequency ranges. And also this paper presents the applied results of Power Flow Finite Element Method (PFFEM) by forming the new joint element matrix with CLF to analyze the various plate structures in shape. The analytical results of automobile, complex plate structures show good agreement with those of PFFEM using the PFA coefficients.

• 신재생에너지
• /
• 제3권1호
• /
• pp.13-19
• /
• 2007

A triangular fin with variable fin base thickness and base height is analyzed and optimized for the fixed fin base height using a two-dimensional analytical method. At the middle of the fin length, the variation of the temperature along the fin height is listed. The influences of the fin length, base thickness and base height on the heat loss and fin efficiency are analyzed, The optimum heat loss, corresponding optimum efficiency and optimum fin length as a function of the fin base thickness are presented. The optimum heat loss and optimum fin tip length as a function of the convection characteristic number are represented.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권2호
• /
• pp.48-54
• /
• 2003

To evaluate the radiation degradation of ethylene propylene rubber (EPR), radiation effects on EPR were investigated by using dielectric analysis and thermal-gravimetric analysis. Permittivity, loss factor, tan$\delta$, and thermal decomposition temperature were observed for ${\gamma}$-ray irradiated EPR. As the radiation dose was increased, the peak temperature of the loss factor and tans of EPR were increased and loss factor and tan$\delta$ at peak temperature were decreased. Activation energies were calculated using loss factor and thermal decomposition for ${\gamma}$-ray irradiated EPR as well. The trends of both calculated activation energies showed the same tendencies as radiation dose was increased.

• Elastomers and Composites
• /
• 제32권1호
• /
• pp.29-36
• /
• 1997

The change of elastic modulus(E'), loss modulus(E"), and loss $tangent(tan{\delta})$ were investigated on condition of double strain amplitude (DSA) at temperature of $-40{\sim}80^{\circ}C$ for carbon black filled natural rubber. E', E", and $tan{\delta}$ were increased as it closed to the glass transition temperature due to decrease of rubber network flexibility and carbon black agglomerate interaction. In the micro strain range, energy loss showed maximum value because of the chain slippage in rubber matrix, but the regeneration of carbon black agglomerate and rubber matrix affected decrease of energy loss over the mid-range strain. As a results of regression analysis, $E'\;_{max}$ correlation with ${\Delta}E'$ $(E'\;_{0.4%DSA}-E'\;_{2.0%DSA})$ showed linear relationship.