• Nuclear industry
• /
• v.28 no.2 s.300
• /
• pp.39-42
• /
• 2008

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.74-78
• /
• 2010

In this paper, crosslinked polyethylene (PE) separators for lithium secondary batteries were prepared by an electron beam irradiation under various beam currents and dose rates. The crosslinking degree increased up to maximum 71% with an increasing absorption dose and with a decreasing beam current. The PE separators irradiated at lower beam currents showed better thermal shrinkage (51%) and mechanical properties than the original PE separator and PE separators irradiated at higher beam current. The ionic conductivity ($1.01{\times}10^{-3}\;S/cm$) and electrolyte uptake (275%) of the crosslinked PE separators were comparable to the original PE separator.

• Journal of Power System Engineering
• /
• v.17 no.5
• /
• pp.78-85
• /
• 2013

A high thermal conductivity material, namely graphene is treated by planetary ball milling machine to transport the heat by increasing the temperature. Experiments were performed to assess the heat transfer enhancement benefits of coating the bottom wall of copper substrate with graphene. It is well known that the graphene is unable to disperse into base fluid without any treatment, which is due to the several reasons such as attachment of hydrophobic surface, agglomeration and impurity. To further improve the dispersibility and thermal characteristics, planetary ball milling approach is used to grind the raw samples at optimized condition. The results are examined by transmission electron microscopy, x-ray diffraction, Raman spectrometer, UV-spectrometer, thermal conductivity and thermal imager. Thermal conductivity measurements of structures are taken to support the explanation of heat transfer properties of different samples. As a result, it is found that the planetary ball milling approach is effective for improvement of both the dispersion and heat carriers of carbon based material. Indeed, the heat transfer of the ground graphene coated substrate was higher than that of the copper substrate with raw graphene.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.598-602
• /
• 2008

In this study we prepared crosslinked separators with the improved thermal stability by irradiating a commercial polyethylene (PE) separator for lithium secondary battery with an electron beam, and the thermal and mechanical properties of the prepared separators were evaluated as a function of the absorption dose. The thermal shrinkage of electron beam irradiated separator was decreased with increasing absorption dose. As a result of the shutdown behavior using an AC impedance, it was observed that the irradiated separator had the better shutdown function than the unirradiated separator. The modulus of the irradiated separator was enhanced as the absorption dose was increased, while the tensile strength and the break elongation of the irradiated separator were decreased.

• Korean Management Science Review
• /
• v.31 no.1
• /
• pp.41-48
• /
• 2014

This study presents a bottom-up approach for analyzing greenhouse gas (GHG) emissions for the shipbuilding industry in Korea. The overall procedures for deriving GHG emissions from the Korean shipbuilding industry are presented. Based on the long-term forecast on energy demands of the Korean shipbuilding industry, reference energy system (RES) and energy balance (EB) for the shipbuilding process are derived for bottom-up modeling.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.285-288
• /
• 2010

Polyimide films have excellent thermal stability, reliable mechanical properties and low dielectric constant. Therefore, this material is widely used in many industrial fields such as microelectronics, flexible circuits, semiconductor products and aerospace materials. In space applications, earth-orbiting hardware operates in environments that generally include neutral particles, charged particles such as trapped protons and electrons, solar protons, and cosmic rays. Under these conditions, polyimide films were changed in the optical, electrical and mechanical properties. Therefore, in this study, we evaluated the effects of electron beam irradiation on polyimide. The O-H functional groups were created on the polyimide film surface in the results of FT-IR spectra. And it was found that the dielectric constants were changed as a function of electron beam dose.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.167-170
• /
• 2013

Lignin can be a valuable natural chemical resource. Structurally, lignin is a three-dimensional polymer made up of condensed C-C bonds and some ether linkages, most of which are not readily degraded. In this study, lignin carbonization under various electron beam pretreatment conditions was characterized through a thermogravimetric analysis (TGA), X-ray diffraction (XRD) and Raman spectroscopy. Lignin stabilization was controlled by various doses of electron beam irradiation corresponding to 50, 100, 200, 500 and 1,000 kGy; the carbonization process was performed under a nitrogen gas atmosphere at $1000^{\circ}C$ for 1 h. The TGA results showed that a 1,000 kGy lignin dose increased the residue weight from 39.96% to 45.23%, compared to non-irradiated lignin. This observation is in agreement with the XRD and Raman spectroscopy results, in which the two theta degrees and the degree of crystallization were improved by increasing the electron beam irradiation.

• Environmental and Resource Economics Review
• /
• v.20 no.2
• /
• pp.255-289
• /
• 2011

This study made linked Energy IO Table 00-05-08 of 76 sectors in intermediate sectors and analyzed structural decomposition analysis in energy consumption change in industrial sector with both by aggregate data and micro data. Structural decomposition analysis focused value added level change, value added share change of each industry, output structural change of each industry and energy intensity change of each industry as factors. Supply side model based on Ghosh inverse matrix was applied as empirical model because Korea has export driven industrial structure. Empirical results with aggregate data showed that value added change increased energy consumption and output structural change of each industry decreased energy consumption in both 2000~2005 and 2005~2008. However value added share change and energy intensity change caused opposite direction in energy consumption change with time. Policy based on aggregate data can not evaluate effort of each industry in energy efficiency and make effective results because aggregate data delete character of each industry.

• Korean System Dynamics Review
• /
• v.8 no.2
• /
• pp.115-140
• /
• 2007

Changes in material use, energy use and emissions profiles of steel industry are the result of complex interrelationships among a multitude of technological and economic drivers. To better understand and guide such changes requires that attention is paid to the time-varying consequences that technology and economic influences have on an industry's choice of inputs and its associated outputs. We briefly review the range of policy issues in our paper and assess the impact that climate-change policies may have on energy use and carbon emissions in Korea steel industry. We then present the models of Korea steel industry's energy and product flow regarding environmental regulations by using system dynamics simulation methodology(SD). Time series data and engineering information are combined to endogenously specify changes in technologies, fuel mix, and production processes within dynamic simulation model. Through a various scenario, ramifications that the convention of climate change would to steel industry is analyzed, and based on the study results, strategies against environment changes is contemplated in various perspectives to contribute to minimize the risks concerning the uncertain future and to be conducive to Korea steel industry's sustainable development.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.43-51
• /
• 2012

Carbon dioxide emission trading market would play very important role in the global effort to cope with climate change. In KOREA, the energy consumption and geen house gas emission of various industry would be controlled by the low carbon-green growth law which was established at 2009. The paper industry as one of major industries in terms of energy consumption has been greatly required to prepare action plan for addressing this regulation and reduction of carbon dioxide emission. In this study, the current states of carbon dioxide emission trading market were analyzed in terms of practical responses of the paper industry. And the various action plans including CDM projects for paper industry were suggested.