• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.517-522
• /
• 2003

Exact estimation of evapotranspiration is important to understand natural phenomena and social issues associated with the climate such as irrigation scheme, reservoir water management, and many other meteorological and climatological problems. To overcome limits of point measurement of evapotranspiration, several models have been developed through the techniques of remote sensing and Geographical Information System. SEBAL model is one of them, based on the energy balance equation, and it has a lot of advantages such as that it requires relatively small empirical relations. In this study, the SEBAL model has been calibrated and validated in Geumgang upper basin, Bochung-stream basin, Korea with 5 satellite images Landsat 5 TM. In validation, the results of SEBAL model were compared with those by Merton method. After validation, the spatial and temporal characteristics of the distribution of evapotranspiration within the basin were analyzed with 3 factors, the aspect of slope, the angle of slope, and the land cover.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.288-295
• /
• 2003

An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the recovery technique. In case of the recovery technique, the SPR(superconvergent patch recovery) approach has been modified for p-adaptive mesh refinement. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly. To verify the proposed algorithm, the limit value approach is proposed which utilizes the exact strain energy computed from the extrapolation equation. A new pre-processor is developed for the p-version finite element program in which the vector graphic editor is used for the automatic generation of node connection and coordinate by halfedge solid data structure according to uniform or nonuniform p-distribution. The general 2-D algorithm is also developed to generate face modes and internal modes in accordance with different mesh types. The quality of the error estimator is investigated with the help of two mumerical examples. The results show that the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• Archives of Pharmacal Research
• /
• v.12 no.3
• /
• pp.186-190
• /
• 1989

The release rates of methotrexate (MTX) from MTX-human serum albumin (HSA) conjugate, and 5-fluorouracil (5-FU) from 5-FU acetic acid (AA)-HSA conjugate were determined after incubation of the conjugates in various conditions. The concentrations of 5-FU released from the conjugate increased monoexponentially, however those of MTX increased biexponentially in all studies. It indicated that there are two distinct types of MTX-HSA linkage, weakly and tightly bound linkages. The release rates of 5-FU were lower than those of MTX in all studies indicating that the bond of 5-FU-AA-HSA conjugate is very stable, which is supported by the higher value of activation energy (39. 9 vs 10. 7 Kcal/mole) using Arrhenius equation. The release rates of MTX and 5 -FU from the conjugates increased with incubation temperatures. Proteolytic enzyme and liver homogenates accelerated significantly the release rates of MTX and 5-FU. Approximately 1.30 and 22.0% of MTX were released after 12 hours of incubation in the absence and presence of protease, respectively. The corresponding values for 5-FU were released after 12 hours of incubation with rat liver homogenates which were diluted 6 times with phosphate buffer of pH 6.0. The MTX-HSA and 5-FU-AA-HSA conjugates were very stable in rat plasma.

• Nuclear Engineering and Technology
• /
• v.23 no.3
• /
• pp.275-284
• /
• 1991

It is important to predict the main feature of fully developed turbulent secondary flow through infinite triangular arrays of parallel rod bundles. One-equation turbulence model which include anisotropic eddy viscosity model was applied to predict the exact velocity field. For a constant properties, Reynolds equations were solved by the finite element method. Mean axial velocity near the wall is simulated by the law of the wall. The numerical results showed good agreement with avaiable experimental data. The strength of the secondary flow increased with Reynolds number but decreased with rod spacing, P/D (pitch-to-diameter). The secondary flow affects remarkably the distribution of the axial velocity, wall shear stress and turbulent kinetic energy in the closely packed rod array bundles.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.238-244
• /
• 1994

We numerically studied on the dark solitons propagation for initial amplitude and phase shapes in the normalized nonlinear Schr dinger equation(NLSE) which describes the propagations of optical solitons. As the propagation distance increases, odd dark solitons evolve into a black soliton and pairs of gray solitons which have a different sign of blackness, and even dark solitons evolve into pairs of gray solitons without black solitons. When there exists a black soliton and a gray soliton, even though the initial amplitude shape is same, the sign of blackness of a gray solitons determines whether they would collide or not. We could see that the energy of dark solitons evolve into a couple of solitons of different blackness since there exists a continuous range of dark solitons with arbitrary blackness parameter, and this phenomenon was more clearly seen from the change of phase shapes from that of amplitude shapes. hapes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.47-51
• /
• 2007

The present paper reports the life time prediction of Acrylonitrile-Butadiene rubber (NBR) fuel cell gasket materials as a function of operational variables like acid concentration, ageing time and temperature. Both material and accelerated acid-heat aging tests were carried out to predict the useful life of the NBR rubber gasket for use as a fuel cell stack. The acid ageing of the gasket compounds has been investigated at 120, 140 and $160^{\circ}C$, with aging times from 3 to 600 h and increasing acid ($H_2SO_4$) concentrations of 5, 6, 7 and 10 vol%. Material characteristics the gas compound such as cross-link density, tensile strength and elongation at break were studied. The hardness of the NBR rubber was found to decrease with decreasing acid concentration at both 120 and $140^{\circ}C$, but at $160^{\circ}C$ interestingly the hardness of the NBR rubber increased abruptly in a very short time at different acid concentrations. The tensile strength and elongation at break were found to decrease with increase in both the acid concentrate ion & temperature. The life time of the compounds were evaluated using the Arrhenius equation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.161-164
• /
• 2007

연료전지의 상용화 시점에 이르러 내구성에 대한 기술 확보가 점점 더 부각되고 있다. 현재 연료전지의 내구성을 감소시키는 1차적인 요인은 핵심부품인 촉매, 전해질막, MEA(Membrane & Electrode Assembly) 등에 의한 것이며 2차적인 요인은 운전 시스템 및 환경 등에 의해 결정되어진다. 특히, 연료전지자동차는 이동용, 가정용, 발전용에 비하여 부하변동이 극심한 조건에서 운전되기 때문에 연료전지 시스템의 내구성 확보에 많은 제어기술이 요구된다. 본 연구에서는 연료전지자동차 운전조건(Driving mode)을 부하변동 기준에 의한 고전류, 중전류, 저전류의 3가지 모드로 분류하였다. 각각의 운전조건에서 일정 cycle마다 성능곡선을 측정하여 10만 cycle 이상의 반복운전을 수행하였으며 측정된 성능곡선을 empirical equation에 적용하여 시간에 따른 overvoltage 인자에 대한 분석을 하였다. 운전시간이 증가함에 따라 고전류 모드의 경우 activation overvoltage 인자 중 current density loss가 증가하여 OCV가 급격히 감소하였으나 내구성은 저전류 모드에 비하여 높게 나타났다. 저전류 모드의 경우 고전류 모드와 상반된 결과를 보였으며 성능감소요인은 activation 및 ohmic overvoltage의 점차적인 증가에 의한 것으로 분석되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.105-108
• /
• 2007

최근 세라믹 막은 우수한 화학적, 열적 안정성으로 기체 분리 공정에 각광을 받아왔다. 특히 혼합기체에서 고 순도의 수소를 분리해 내는 기술은 연료전지 공정에서 화학 에너지를 적기화학 에너지로 전환시키는데 중요한 역할을 차지한다. 본 연구에서는 MTES 템플레이팅 막을 이용하여 이 막 공정의 흡착 및 투과 특성을 규명하고, 이성분 혼합기체에서 고 순도의 수소를 추출해 낼 수 있는 최적 조건을 도출해 내었다. 또한, 기체 분리 거동을 살펴보기 위해 Gproms Simulator를 이용하였으며, 이때 기체상의 물질전달을 모사하기 위해 Dust Gas Model(DGM)을, 표면 확산 거동을 모사하기 위해 Generalized Stefan-Maxwell(GSM)식을 적용하였다. 이를 통해 평형론적 흡착 뿐 아니라 속도론적 흡착을 동시에 적용할 수 있게 하였다. MTES 템플레이팅 막의 흡착 및 분리능을 규명하기 위해 본 연구에서는 혼합기체의 투과, 분리 실험이 선행되었다. 실험 조건은 온도범위 $30{\sim}50$ $^{\circ}C$, 압력범위 $0{\sim}5$ atm에서 수행되었으며, 혼합기체는 2성분으로 수소 메탄, 수소-이산화탄소, 수소-질소로 기체의 구성비는 각각 50:50 이다. 본 연구를 통해 각 혼합 기체들이 정상상태에 도달하는 시간과 분리능을 계산해 내었으며, 이 분리능을 다시 온도와 압력에 따른 결과로 분석하여 어느 조건에서의 수소 분리도가 최고치를 보이는지를 규명했으며, 시뮬레이션과 비교, 대조하여 예측도를 검사하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.6
• /
• pp.499-505
• /
• 2011

This paper presents optimal design of controllable magnetorheological suspension unit for a tracked vehicle. As a first step, a double-rod type MR suspension unit is designed on the basis of the Bingham model of commercially available MR fluid, and its damping characteristics are evaluated with respect to the intensity of the magnetic field. Subsequently, the governing equation of motion of the MR suspension system featuring the MR valve is established. Then, the optimization problem to find optimal geometric dimensions of the MR supension unit is formulated by considering an objective function which is related to damping torque and control energy. The first order optimization method intergrated with a commercial finite element method(FEM) software is adopted to obtain optimal solution of the system. The performance characteristics of the optimized MR susepnsion unit is then evaluated and compared with initial one.

• Journal of Photoscience
• /
• v.7 no.1
• /
• pp.27-30
• /
• 2000

The Photoluminescence (PL) measurement results of a very good quality GaN sample grown by metalorganic chemical vapor deposition (MOCVD) are reported. The temperature dependences of peak position, emission intensity, and the full width at half maximum (FWHM) of free-exciton (FX) A and B are presented. Our results show the fast thermal quenching of FX transition intensities and predominantly acoustic phonon scattering of emission line broadening. The transition-energy-shift following the Varshni's empirical equation, and by using it to fit the data, E$\_$A1/(T) = 3.4861 eV -6.046 $\times$ 10$\^$-4/T$^2$ (620.3+ T) eV, E$\_$B1/(T) = 3.4928 eV -4.777 $\times$ 10$\^$-4/T$^2$ / (408.2+ T) eV and E$\_$A2/ = 3.4991 eV -4.426 $\times$ 10$\^$-4/ T$^2$ / (430.6+ T) eV for A(n=1), B(n=1), and A(n=2) are obtained respectively.