• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.593-596
• /
• 2006

This paper introduces various natural energy systems installed at the Eco-Science Center in Geumsan near Taejon. The center, especially, features different solar energy systems to harvest the solar energy to its full extent. Such passive schemes as direct gain and at lacked sun space are applied along with active solar ingredients using flat plate and double skin solar collectors. Space and water heating depends very little on the conventional means. Also a number of photovoltaic modules deployed within its premise supplies power to drive a water pump for the biotop. Combined with other natural energy utilizing systems, the solar energy systems make an exemplary model of a self sustainable public facility which is the first of its kind in Korea.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.3
• /
• pp.238-243
• /
• 2005

Mg and Mg-based alloys are most important hydrogen storage materials. It is a lightweight and low-cost materials with high hydrogen storage capacity. However, the formation of hydride at high temperature, the deterioration effect, the hydriding and dehydriding kinetics are bad factor for application. In this study, Mg and Ni have been produced by hydrogen induced mechanical alloying(HIMA) process. The raw materials, Mg(purity 99.9%) chip and Ni(purity 99.95%) chip was prepared by using a planetary ball mill apparatus(FRITSCH pulverisette 5). The balls to chips mass ratio(BCR) are 30:1. The hydrogen pressure induced 2.0MPa and milling times were 12, 24, 48, 72, 96 hours with a rotating speed of 200rpm. X-ray diffraction(XRD) analysis was made to characterize the crystallite size and misfit strain. The crystallite size measured by laser particle size analysis(PSA). Microstructure changes were investigated by scanning electron microscopy(SEM) and the transmission electron microscopy(TEM). The hydrogen storage properties were evaluated by using an Sivert's type automatic pressure-composition-therm(PCT) apparatus.

• World Technopolis Review
• /
• v.3 no.2
• /
• pp.89-96
• /
• 2014

Center for Research of Science and Technology ("PUSPIPTEK") has 460 hectares land area, still maintained as a green area with more than 30% green space. There are 47 centers for research and testing technology, technology-based industries, and as well as public supporting facilities in PUSPIPTEK area. Based on the concepts developed to make this area as an ecological region, PUSPIPTEK can be seen as a model of eco-innovation. The purpose of this research is to develop a model of water, energy and waste management with eco-innovation concept. As a new approach in addressing environmental degradation and maintaining the sustainability of ecosystem, studies related to eco-innovation policy that combines the management of water, energy and waste in the region has not been done. In order to achieve the objectives of the research, a series of techniques for collecting data on PUSPIPTEK existing conditions will be carried out, which includes utilities data (water, electricity, sewage) and master plan of this area. The savings over the implementation of the concept of eco-innovation in water, energy, and waste management were calculated and analyzed using quatitative methods. The amount of cost savings and feasibility were then calculated. Eco innovation in water management among other innovations include the provision of alternative sources of water, overflow of rain water and water environments utilization, and use of gravity to replace the pumping function. Eco-innovation in energy management innovations include the use of LED and solar cell for air conditioning. Eco-innovation in waste management includes methods of composting for organic waste management. The research results: (1) The savings that can be achieved with the implementation of eco innovation in the water management is Rp. 3,032,640 daily, or Rp.1,106,913,600 annually; (2) The savings derived from the implementation of eco innovation through replacement of central AC to AC LiBr Solar Powered will be saved Rp.1,933,992,990 annually and the use of LED lights in the Public street lighting PUSPIPTEK saved Rp.163,454,433 annually; (3) Application of eco innovation in waste management will be able to raise awareness of the environment by sorting organic, inorganic and plastic waste. Composting and plastic waste obtained from the sale revenue of Rp. 44,016,000 per year; (4) Overall, implementation of the eco-innovation system in PUSPIPTEK area can saves Rp. 3,248,377,023 per year, compared to the existing system; and (5)The savings are obtained with implementation of eco-innovation is considered as income. Analysis of the feasibility of the implementation of eco-innovation in water, energy, and waste management in PUSPIPTEK give NPV at a 15% discount factor in Rp. 3,895,228,761; 23.20% of IRR and 4.48 years of PBP. Thus the model of eco-innovation in the area PUSPIPTEK is feasible to implement.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.130-135
• /
• 2005

Cadmium selenide is one of the group IIb-VI compounds, which is the promising semiconductor material due to its wide range of technological applications in optoelectronic devices such as photoelectrochemical cells, solid state solar cells, thin film photoconductors etc. CdSe has optical band gap of 1.7-1.8eV and proper conduction band edge for water splitting. CdSe films are coated with small thickness(20-50nm) nanocrystalline $TiO_2$ film by electrodeposition or chemical bath deposition methods and PEC properties of CdSe and CdSe/$TiO_2$ sandwich structure are studied. The photoactivity of CdSe and CdSe/$TiO_2$ films deposited on titanium substrate is studied in aqueous electrolyte of 1M NaOH solution. Photocurrent and photovoltage obtained were of the order of 2-4 mA/$cm^2$ and 0.5V, respectively, under the intensity of illumination of 100 mW/$cm^2$.

• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.313-317
• /
• 2008

[ $LaFeO_3$ ] powders were synthesized using a method involving solution combustion, and the surface properties of these powders were examined by x-ray photoelectron spectroscopy. As the amount of fuel increased during the synthesis, the $LaFeO_3$ powders became amorphous with a large plate-like shape. It was found that the O 1s spectra were composed of two types of photoelectrons by deconvolutioning the spectra. Photoelectrons with higher binding energy come from adsorbed oxygen ($O^-$) whereas those with lower energy come from lattice oxygen ($O^{2-}$). The ratio of adsorbed and lattice oxygen increased as the ratio of the fuel and nitrate (${\Phi}$) increased. The binding energy of both types of oxygen increased as ${\Phi}$ increased due to the formation of carbonates.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.3
• /
• pp.528-539
• /
• 2013

Biodiesel is one of the most important renewable energy, since it is one of the most important alternative and eco-friendly energy source compared to fossil energy, especially for diesel engineequipped vehicles. It is now coming up for preparation of biodiesel as the alternative that applies the hetrogeneous catalyst, super critical state and various methods used in order to reduce the stages of the processes be converted and separation stages started from oil and fat which are originated from animals and wastes, and those new methods bring eco-friendly as well, though some of those are stand on research step so far. It is necessary that nation provides the tax exemption program for the supplier and strengthen the research system for the farming crops relate to fat and oil. It can improve the development of biodiesel which sustains stability against oxidation and keeps good mobility over the low temperatures in the winter season by new additives and develops new processes to show good harmony with diesel engine.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.4
• /
• pp.264-270
• /
• 2010

Recently, the most promising methods for high purity hydrogen production are membranes separation such as polymer, metal, ceramic and composites. It is well known that Pd and Pd-alloys membranes have excellent properties for hydrogen separation. However, it has hydrogen embrittlement and high cost for practical applications. Therefore, most scientists have studied new materials instead of Pd and Pd-alloys. On the other hand, TiN powders are great in resistance to acids and chemically stable under high operating temperature. In order to get specimens for hydrogen permeation, the TiN powders synthesized were consolidated together with Co, Ni powders by hot press sintering (HPS). During the consolidation of powders at HPS, heating rate was 10 K/min and the pressure was 10 MPa. It was characterized by XRD, SEM. Also, we estimated the hydrogen permeability by Sievert's type hydrogen permeation membrane equipment.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.6
• /
• pp.780-786
• /
• 2011

Mg hydride had high hydrogen capacity (7.6%), lightweight and low cost materials and it was promising hydrogen storage material at high temperature. However, commercial applications of the Mg hydride are currently hindered by its high absorption/desorption temperature, and very slow reaction kinetics. one of the approaches to improve the kinetic is $MgH_x$ intermixed with carbon. And it shows that carbon and carbon allotropes have a beneficial effect on hydrogen sorption in Mg. The graphene is a kind of carbon allotropes which is easily desorbed reaction at low temperatures because its reaction is exothermic. In this work, the effect of graphene concentration on the kinetics of Mg hydrogen absorption reaction was investigated. The $MgH_x$-Graphene composites has been prepared by hydrogen induced mechanical alloy (HIMA). The synthesized powder was characterized by XRD and simultaneous TG, DSC analysis. The hydrogenation behaviors were evaluated by using a sievert's type automatic PCT apparatus. In this research, results of kinetic profiles exhibit hydrogen absorption rate of $MgH_x$-5wt.% and 10wt.% graphene composite, as 1.25wt.%/ms, 10.33wt.%/ms against 0.88wt.%/ms for $MgH_x$ alone at 473K.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.3
• /
• pp.204-213
• /
• 2002

In this work, hydrogen production by a 2-step water-spritting thermochemical cycle based on metal oxides redox pairs was investigated on the bases of the thermodynamics and technical feasibility. Also, a 2nd-law analysis performed on the closed cyclic process indicates a maximum exergy conversion efficiency of 7.1% when using a solar cavity-receiver operated at 2300K and air/Fe3O4 molar ratio = 10.

• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.281-289
• /
• 2013

For the purpose of evaluating the eco-efficiency(EE) on surplus heat generated from industrial process, techniques of life cycle assessment are adopted in this study. Because it can be indicated both environmental impacts and economic benefits, EE is well known as a useful tool for symbiosis network on the sustainable development of new projects and businesses. To evaluate environmental impacts, the categories were divided into two areas of resource depletion and global warming potential. It can be seen that environmental impact increased a little but much higher economic benefit on the company, environmental performance and economic value were improved on the apartment by the district heating, respectively. In result, eco-industrial park(EIP) project on surplus heat should be found sustainable new business because the EE was in the area of fully positively eco-efficiency and, moreover resource depletion was taken place than the reduction of greenhouse gas.