• Earthquakes and Structures
• /
• v.24 no.5
• /
• pp.317-331
• /
• 2023

The buckling-restrained braced frames with eccentric configurations (BRBFECs) are stable cyclic behavior and high energy absorption capacity. Furthermore, they have an architectural advantage for creating openings like eccentrically braced frames (EBFs). In the present study, it has been suggested to use the performance-based plastic design (PBPD) method to calculate the design base shear of the BRBFEC systems. Moreover, in this study, to reduce the required steel material, it has been suggested to use the performance-based practical design (PBPD) method instead of the force-based design (FBD) method for the design of this system. The 3-, 6-, and 9-story buildings with the BRBFEC system were designed, and the finite element models were modeled. The seismic performance of the models was investigated using two suits of ground motions representing the maximum considered earthquake (MCE) and design basis earthquake (DBE) seismic hazard levels. The results showed that the models designed with the suggested method, which had lower weights compared to those designed with the FBD method, had a desirable seismic performance in terms of maximum story drift and ductility demand under earthquakes at both MCE and DBE seismic hazard levels. This suggests that the steel weights of the structures designed with the PBPD method are about 13% to 18% lesser than the FBD method. However, the residual drifts in these models were higher than those in the models designed with the FBD method. Also, in earthquakes at the DBE hazard level, the residual drifts in all models except the PBPD-6s and PBPD-9s models were less than the allowable reparability limit.

• Computers and Concrete
• /
• v.33 no.3
• /
• pp.251-264
• /
• 2024

The present study pertains to the effects of variations in the location and size of drilled web openings on the behavior of fixed-fixed reinforced concrete (RC) beams. For this purpose, a reference bending beam with a transverse opening in each half span was tested to failure. Later, the same beam was modeled and analyzed with the help of finite element software using ABAQUS. Upon achieving close agreement between the experimental and numerical results, the location and size of the web opening were altered to uncover the effects of these factors on the shear strength and load-deflection behavior of RC beams. The experimental failure mode of the tested beam and the numerical results were also verified by theoretical calculations. In numerical analysis, when compared to the reference (D0) specimen, if the distance of the opening center from the support is 0 or h or 2h, reduction in load-bearing capacity of 1.5%-22.8% or 2.0%-11.3% or is 4.1%-40.7%. In other words, both the numerical analyses and theoretical calculations indicated that the beam behavior shifted from shear-controlled to flexure-controlled as the openings approached the supports. Furthermore, the deformation capacities, energy absorption values, and the ductilities of the beams with different opening diameters also increased with the decreasing distance of the opening from supports. Web compression failure was shown to be the predominant mode of failure of beams with large diameters due to the lack of sufficient material in the diagonal compression strut of the beam. The present study indicated that transverse openings with diameters, not exceeding about 1/3 of the entire beam depth, do not cause the premature shear failure of RC beams. Finally, shear damage should be prevented by placing special reinforcements in the areas where such gaps are opened.

• Applied Biological Chemistry
• /
• v.15 no.3
• /
• pp.229-240
• /
• 1972

Not only in order to determine reasonable application amounts of PCP in terms of soil texture, but also to get basic data for fish-toxicity-free treatment by estimating fish toxicity, some aspects of PCP adsorption were observed taking various paddy soils with different physico-chemical characteristics in the Choongbook Area as samples. The results obtained are summarized as follows: 1. There was a positive correlation between PCP adsorption and clay contents, total nitrogen, organic matter, cation exchange capacity, exchangeable bases, and phosphorus absorption coefficients, respectively; whereas there was a negative one between PCP adsorption and pH. Although they were not significant, it was remarkable that there was a relatively large amount of correlation between PCP adsorption and clay contents, $H^+,\;Mg^{++}$, and CEC, respectively. 2. PCP adsorption in terms of soil texture was in the order of Clay>Loam>Sandy loam. 3. Although PCP adsorption in the $H_2O_2-treated$ soils decreased remarkably, it was not proportional to the humus contents. 4. The order of PCP adsorption in the exchangeable base-treated soils was H^+-exchanged soil>$K^+-soil$>$Na^+-soil$>$Ca^{++}-soil$>Mg^{++}-soil. 5. Langmuir's and Freundlich's adsorption isotherms were applicable to the PCP adsorption, and thereby were able to be calculated maximum adsortion amounts of PCP, bond energy, and the depths of adsorption layers. 6. Maximum adsorbed amounts of PCP were 212.14 mg/100gr in Clayey loam, 97.28 to 121.59mg/100gr in Loam, and 32.92 to 91.74mg/100gr in Sandy loam, respectively. 7. The depths of mixed layers of limiting application for fish-toxicity-free treatment were 0.88cm of the Jinchun soil, the shallowest and 4.29 cm of the Naesan-ri Sandy loam, the deepest.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.107-114
• /
• 1998

The solubilities of $CO_2$ in 20wt% and 30wt% aqueous AMP solution were obtained from experiments at 40, 50, 60, 70, $80^{\circ}C$. Using the modified Kent-Eisenberg model, equilibrium constants and correlations were determined from the regression of experimental results of 30wt% aqueous AMP solution. There were good agreements between the predicted $CO_2$ solubilities in 20wt% aqueous AMP solution and experimented values. The prediction was conducted at the condition in the literature and the predicted values calculated from the model and correlations which were obtained from this work agree well with the prediction from Deshmukh-Mather model. Thus, the modified Kent-Eisenberg model and correlated equations suggested by this work, resonably well represent vapor-liquid equilibrium of $CO_2$ with aqueous AMP solution. The calculation of chemical species concentration in the liquid phase was performed uslng equilibrium model and from this calculation, we confirm that good absorption capacity is due to the formation of unstable carbamate. Heat of solution(${\Delta}Hs$) was calculated from the solubility data using the Gibbs-Helmholtz equation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.5
• /
• pp.616-621
• /
• 2017

The objective of this study was to investigate the physicochemical properties of domestic strong wheat flour (DSWF). Three commercial DSWFs (D1, D2, and D3) were compared with imported strong wheat flour (ISWF). DSWFs had higher moisture content, crude protein content, lightness, and whiteness than ISWF. DSWFs showed lower solvent retention capacity and water absorption index than ISWF. DSWFs also showed significantly higher water solubility index than ISWF (P<0.05). Setback values by rapid visco analysis were significantly higher in D1 and D2 than in ISWF and D3, which means ISWF and D3 were better in retarding retrogradation. Differential scanning calorimetry results showed that ISWF required 6.2 J/g of energy for phase transition, whereas DSWFs needed 6.67~7.13 J/g. The farinograph results showed that ISWF had higher water absorption, longer dough stability time, and significantly higher softening of dough at 20 min than DSWF (P<0.05). Dough resistance and extensibility were higher in ISWF than in DSWFs.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.38-50
• /
• 1987

The purpose of this comparative study is to investigate the differences of growth behaviors (height, weight, yield capacities etc.) and germination characters (induced photo-dormancy) among the three different species of Arnaranthus sp. The results obtained are summarized as follows. The growth of the cultivar of A.hypochondriacus was more vigor than that of the wild plant of A.retroflexus during the whole life cycle. The fresh weight, dry weight, yield capacity of A.hypochondriacus were much more higher than those of the others two species (A.retroflexus and A.Cruenthus). There are very different germinability formation and induced dormancy patterns between the cultivar and wild plant during seed formation periods. The cultivar of A.hypochondriacus was not induced primary dormancy in the any seed formation stages but wild plant of A.retroflexus was induced deep true dormancy. We suggested that these differences occured by the sum of different absorption of solar energy spectrum by the different seed colors between the cultivar (white color seed) and wild (black seed). And we confirmed the different absorption spectrum of the three different Arnaranthus sp. seeds.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.143-150
• /
• 2012

A simulation methodology and corresponding program based on it is to be discussed for analyzing the effects of the networking operation of existing DHC system in connection with CHP system on-site. The practical simulation for arbitrary areas with various building compositions is carried out for the analysis of operational features in both systems, and the various aspects of thermal energy grids with connecting operation are highlighted through the detailed assessment of predicted results. The intrinsic operational features of CHP prime movers, gas engine, gas turbine etc., are effectively implemented by realizing the performance data, i.e. actual operation efficiency in the full and part loads range. For the sake of simplicity, a simple mathematical correlation model is proposed for simulating various aspects of change effectively on the existing DHC system side due to the connecting operation, instead of performing cycle simulations separately. The empirical correlations are developed using the hourly based annual operation data for a branch of the Korean District Heating Corporation (KDHC) and are implicit in relation between main operation parameters such as fuel consumption by use, heat and power production. In the simulation, a variety of system configurations are able to be considered according to any combination of the probable CHP prime-movers, absorption or turbo type cooling chillers of every kind and capacity. From the analysis of the thermal network operation simulations, it is found that the newly proposed methodology of mathematical correlation for modelling of the existing DHC system functions effectively in reflecting the operational variations due to thermal energy grids with connecting operation. The effects of intrinsic features of CHP prime-movers, e.g. the different ratio of heat and power production, various combinations of different types of chillers (i.e. absorption and turbo types) on the overall system operation are discussed in detail with the consideration of operation schemes and corresponding simulation algorithms.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1310-1314
• /
• 2006

Sulfur-substituted $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$ $(0\;\leq\;x\;\leq\;0.1)$ layered oxides have been prepared by solid state reaction under inert atmosphere. From powder X-ray diffraction analyses, all the present lithium manganates were found to be crystallized with monoclinic-layered structure. Electrochemical measurements clearly demonstrated that, in comparison with the pristine $LiMn_{0.9}Cr_{0.1}O_2$, the sulfur-substituted derivatives exhibit smaller discharge capacities for the entire cycle range but the recovery of discharge capacity after the initial several cycles becomes faster upon sulfur substitution. The effect of the sulfur substitution on the chemical bonding nature of $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$has been investigated using X-ray absorption spectroscopic (XAS) analyses at Mn and Cr K-edges. According to Mn K-edge XAS results, the trivalent oxidation state of manganese ion remains unchanged before and after the substitution whereas the local structure around manganese ions becomes more distorted with increasing the substitution rate of sulfur. On the other hand, the replacement of oxygen with sulfur has negligible influence on the local atomic arrangement around chromium ions, which is surely due to the high octahedral stabilization energy of $Cr^{+III} $ ions. Based on the present experimental findings, we have suggested that the decrease of discharge capacity upon sulfur substitution is ascribable to the enhanced structural distortion of $MnO_6$ octahedra and/or to the formation of covalent Li-S bonds, and the accompanying improvement of cyclability would be related to the depression of Mn migration and/or to the pillaring effect of larger sulfur anion.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.239-248
• /
• 2006

Improvements in understanding the effects of dietary fermentable carbohydrates and their interaction with supplemental feed enzymes and the feed manufacturing process may lead to reductions in volatile organic compound (VOC) emissions from poultry manure. Starch digestibility has been improved by replacing ground wheat or barley with whole wheat or barley, but there was no consistent effect of cereal species or feed form on the pH value of the gizzard contents. Pelleting results in improvements in feed conversion from 0 to 12%. Starch digestibility has been reported to account for up to 35 % of the improvement in available metabolic energy as a result of xylase supplementation. Factors which affect starch utilization and non-starch polysaccharide (NSP) absorption include the presence of anti-nutrient facto. (ANF) in grains, the nature of grain starch, NSP and the digestive capacity of animals. Improvements in feed production technology have been made in enzyme stabilization, allowing some dry enzyme products to be pelleted after conditioning at up to $87.69^{\circ}C$ and liquid enzymes to be stored in the feed mill for up to low months prior to use. The soluble NSP, arabinokylans and beta-glucans are partially degraded into smaller fragments by enzymes. With fragmentation, the water holding capacity is decreased, which leads to a reduction in digesta moisture, wet feces, and dirty eggs from hens fed diets containing viscosity-inducing ingredients.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.3
• /
• pp.111-115
• /
• 2005

The concentration of atmosphere carbon dioxide ($CO_2$) which is one of the major greenhouse gas, continues to rise by the increase in fossil fuel consumption, forest destruction and decrease of biological diversity, etc. In order to weaken the global warming, a reduction of $CO_2$ discharge to the atmosphere is required. The $CO_2$ ocean sequestration technology utilizes the intrinsic oceanic capacity of $CO_2$ absorption, diluting and/or dispersing the liquefied $CO_2$ in the deep ocean (>2,000 m). This geo-engineering approach is regarded as one of the occasions to mitigate the $CO_2$ concentration in the atmosphere. Some developed centuries such as Japan, USA, Norway, etc. have intensively carried out the projects on the research and development of $CO_2$ ocean sequestration since 1990s. There have been several approaches to develop the relative technological system to mitigate the increasing $CO_2$, however, there was no systematic and practical R&D programme in the $CO_2$ ocean sequestration. This paper has described the state of the art on the three optional methods of $CO_2$ sequestration, and compared with them in the aspect of the applicable possibility.