• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제29권4호
• /
• pp.584-590
• /
• 2005

The effect of microstructure on mechanical behavior for Ti-6Al-4V alloy was studied. Two different kinds of specimens are prepared using heat treatments (rolled plate, $1050^{\circ}C)$ in order to Produce different microstructures. Various kinds of mechanical tests such as hardness, tensile, fatigue and fretting fatigue tests are performed for evaluation of mechanical properties with the changes of microstructures. Through these tests, the following conclusions are observed: 1) Microstructures are observed as equiaxed and $widmanst{\ddot{a}}ten$ microstructures respectively. 2) Impact absorbed energy is superior for the equiaxed microstructure, and the hardness and tensile strength are superior for the $widmanst{\ddot{a}}ten$ microstructure. 3) The fatigue endurance of $widmanst{\ddot{a}}ten$ microstritcture shows higher value than that of the equiaxed microstructure. 4) The fatigue endurance in fretting condition was reduced about $50{\%}$ from that of the non-fretting condition.

• Transactions of the Korean hydrogen and new energy society
• /
• 제27권4호
• /
• pp.341-348
• /
• 2016

The experiments related on structure and water electrolysis performance of HALE UAV stack were conducted in this study. Anode catalyst $IrRuO_2$ was prepared by Adam's fusion methods as 2~3 nm nano sized particles, and the cathode catalyst was used as commercial product of Premetek. The MEA (membrane electrode assembly) was manufactured by decal methods, anode and anode catalytic layers were prepared by electro-spray. HALE stack was composed of 5 multi-cells as $0.2Nm^3/hr$ hydrogen production rate with hydrogen pressure as 10 bar. The water electrolysis performance was investigated at atmospheric pressure and temperature of $55^{\circ}C$. Best performance of HALE UAV stack was recorded as cell voltage efficiency as 86%.

• Physical Therapy Korea
• /
• 제5권3호
• /
• pp.63-71
• /
• 1998

Trunk holding test (Sorensen test) appear to have more value than strength test in prediction the occurrence of low back pain. Electromyographic activity of trunk extensor muscles during these test may provide clues to the etiology of neuromuscular-based low back pain. This study investigated the difference in back muscle endurance between healthy adult men and women using surface electromyographic (EMG) power spectral analysis. Thirty hea1thy subjects (15 men and 15 women) performed an unsupported trunk holding test for 60 seconds. Recording surface electrodes were placed over the erector spinae medially and laterally at vertebral levels of $L_1$ and $L_5$. Slope of total frequency was evaluated using the MP100WSW Fast Fourier Transform spectrum analysis program. The slopes of all indices of back muscle fatigue, except right $L_5$, were significantly steeper in men than in women (p<0.05). Our results indicated that the trunk holding test using EMG power spectral analysis of erector spinae muscles is useful for the evaluation of fatigue rate of these muscles. Our results also showed a higher muscle endurance in healthy adult women than in men.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제25권5호
• /
• pp.539-544
• /
• 2022

This research shows the test performance of a 6 kW-scale hybrid electric power system for the high endurance drone. The power system is composed of a two-stroke reciprocal engine, starter-generator and battery, and they are integrated as one power unit. The engine is designed to provide the house for holding the starter-generator at the end of a crankshaft in turn the engine and starter-generator can maintain the same speed during the operational period. In this way, the generated power is readily controlled by just manipulating an engine throttle movement. Moreover, the starter-generator can initiate an engine operation with an aid of battery power until the combustion process becomes stabilized. In consequence, integration mechanism between an engine and generator is simplified, which results in weight reduction achieved. The duty of back-up battery is to provide a starting power to generator via a system controller in addition to covering momentarily power shortage. Therefore, the electric power system is vindicated to provide 6 kW power through a ground test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권11호
• /
• pp.223-229
• /
• 2016

In this study, a cold forging process was developed for the roller tappet housing of an engine valvetrain system. A tappet sample was manufactured and subjected to an endurance test. The material properties were obtained from a compression test, and forging analysis was carried out to design a forging process using a commercial program, Deform-3D. The forging process was set up based on the analysis results, and a die set and sample tappet housing were manufactured. To evaluate the sample, the dimensional accuracy, surface roughness, parallelism, and concentricity were measured and confirmed. To evaluate the actuation and durability, a special test rig was developed to simulate the valvetrain system of the engine. An actuation test was performed based on the idle speed of a general diesel engine, and an endurance test was done based on the maximum speed. The results show minor wear of 0.002 mm. The developed test rig will be used to evaluate the actuation and durability of other valvetrain parts.

• Journal of the Korean Society for Precision Engineering
• /
• 제29권9호
• /
• pp.1026-1034
• /
• 2012

The purpose of this study was to verify the validation of effect on improvement of muscle strength unbalance according to exercise load deviation during rowing exercise. We performed evaluation of muscular activity and joint torque before the test. We recruited twenty subjects who one side's muscle strength is bigger in more 20% than other side. Subjects divided two groups. One is dominant left side and the other was dominant right side. Subjects performed rowing exercise in electric load deviation rowing equipment (Robo.gym, Humonic Co., Ltd., Daegu, Korea). Exercise performed four sets a day including 25 times a set, and three days a week. Measurements consist of evaluation of muscular activity and joint torque. Exercise load deviation adapted that different value of muscle strength in both arms multiplied 1RM% and added 1RM 50%. The results in adapted load deviation showed that the differences of maximal peak torque in 22.75% were getting increase significantly during exercise in 5.72%. This interpreted that rowing exercise with loading deviation types could provide muscle strength and muscular endurance exercise in same time for balance. Our study found out that loading deviation could provide muscle strength and muscular endurance exercise for improving muscle unbalance.

• Journal of Animal Science and Technology
• /
• 제59권1호
• /
• pp.2.1-2.6
• /
• 2017

Background: This study aimed to analyze the on heart rate, blood lactate concentration, packed cell volume (PCV) and hemoglobin (Hb) response after conducting exercise in endurance horses. Methods: A total of 20 healthy 3-9-years-old Jeju crossbreed mares ($5.95{\pm}2.24$ year) of age and $312.65{\pm}13.59kg$ of weight) currently participating the endurance competition were used. The field tests selected for the experiment was gallop (approximately 8.3 m/s) along the selected 2.5 km course (a natural forest trail, not artificial road; a closed loop course). The horses were divided into three groups according to their age; 3-4 years of age (G1, $3.29{\pm}0.49$ year), 6-7 years of age (G2, $6.42{\pm}0.53$), and 8-9 years of age (G3, $8.50{\pm}0.55$). The measurements times for the heart rate, blood lactate concentration, PCV, and Hb analysis were conducted before exercise (T0), shortly after exercise (T1), 15 min after exercise (T2), and 30 min after exercise (T3), respectively. Data was analyzed using an analysis of covariance (ANCOVA) for repeated measures with times and groups. Results: The results of the comparison depending on the passage of rest time after exercise suggest that the heart rate and blood lactate concentration of three groups at T2 significantly decreased compared to T1 (p < 0.001). PCV of the G2 and G3 groups were significantly decreased at T2 compared to T1 (p < 0.01). Hb values at G2 (p < 0.01) and G3 (p < 0.001) groups were significantly decreased at T2 as compared to T1. However, heart rate, blood lactate concentration, PCV and Hb level at T1 showed no difference in the comparison of horses from different age groups with the exception of G3 group in terms of heart rate. Conclusion: The physiologic and hematological responses of horses during recovery time after 2,500 m exercise with gallop were no significant difference among the groups. These data are useful as a response evaluation method for training of endurance horses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권9호
• /
• pp.4437-4446
• /
• 2013

The purpose of this study was to development and evaluate the effects of cardiocerebrovascular disease prevention program for taxi drivers on physiological variables(blood pressure, blood sugar, serum lipids) and physical variables(body fat, muscle endurance, cardiopulmonary endurance, balance). This study consisted of two phases: developing the program and evaluating its effectiveness. 1 phase, 321 taxi drivers investigated a health condition and a life habit and an educational need and developed a program with the ground which will reach. 2 phases, The effectiveness of the program was tested in October 2011, with 51 taxi driver. The experimental group was given 12 weeks period exercise 1 weeks 3 time, disease education 4 time, 2 nutrition consultations. Although there was no significant reduction in blood pressure, heart rate, blood sugar, serum lipids, there were statistically significant increases in muscle endurance (t=-7.62 p<.001), cardiopulmonary endurance (t=-3.39, p<.001), balance(t=-4.13, p<.001) and decreased body fat (t= -3.11, p<.015) in before compared to after. These findings suggest that an integrated cardiocerebro-vascular disease prevention program improves physical fitness.

• Proceedings of the KOSOMBE Conference
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.45-46
• /
• 1995

Hip articulation fusion is to relieve hip pain from pathologic joint problem. The questionnaire is followed by hip articulation fusion surgery in order to evaluate the degree of pain, function, mobility. However, this subjective evaluation is controversial. The patient endurance of pain which affect function and mobility of lower extremity call not assess objectively. Therefore, gait analysis is necessary for objective evaluation. This study is to evaluate objectively function and mobility after hip articulation fusion surgery using gait analysis.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.239-245
• /
• 2005

Through the fatigue test of plastic gears using polyacetal polymer, this research aims at providing basic data for not only specifying operation conditions of plastic gears, but also designing dimensions of plastic gears with giving fatigue life and the estimated equation of fatigue life of plastic gears. That is, from the fatigue life curves, the estimated equation of fatigue life of plastic gears is taken out. For the estimated equation of fatigue life of plastic gears, this research provides two test methods; one is preserving non-limited temperature of tooth flank, the other is preserving limited temperature of tooth flank. As results, how the temperature of tooth flank affects the fatigue life is shown. In addition, based on the endurance limit, the essential factors of the unit load and K-factor are determined, which are needed in the design of gear by bending strength and surface durability.