• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.8-11
• /
• 2006

Gas-assisted injection molding (GAIM) process reduces the required injection pressure during mold filling stage as well as the shrinkage and warpage of the part and cycle time. Despite of these advantages, this process needs new parameters and makes the application more difficult because gas and melt interact during the injection molding process. Important GAIM factors involved in this process are gas penetration design, locations of gas injection points, shot size, delay time to inject gas as well as common injection molding parameters. In this study, the experiments are conducted to investigate effects of GAIM process variables on the gas penetration for PP (Polypropylene) and ABS (Acrylonitrile Butadiene Styrene) moldings by changing the gas injection point. Taguchi method is used for the design of the experiments. When the gas is injected at a cavity's center, the most effective factor is the shot size. When the gas is injected at a cavity's end, the most effective factor is the melt temperature. The injection speed is also an effective factor in GAIM process.

• Journal of Construction Engineering and Project Management
• /
• v.4 no.4
• /
• pp.47-59
• /
• 2014

Client organization inadequate project planning before awarding the contract and insufficient monitoring and control system among the parties involved create severe problems. Ultimately, large-scale projects go beyond the expected cost and time control limits. This paper discusses the major issues involved with a large-scale Hydropower Project in Pakistan Public Sector environment. The latest approved Baseline Plan of project was reviewed and analyzed using Variance Analysis and Trend Analysis techniques in Primavera project management software to assess the efforts made of the parties involved. It was found that Project is 202% Cost overrun and 25% time delays from original contract award. After analysis of baseline plan and quantification of various variance issues in impacted activities, the questionnaire survey was conducted to identify the impact of causative factors. There were almost 17 most significant causative factors identified among 60 identified factors and responsibilities are assigned accordingly. At the end recommendations are made for strategic decisions as lessons learned during project evaluation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.486-490
• /
• 2007

Recently, there have been active research efforts on devising efficient routing algorithms utilizing location information in ad-hoc mobile networks. In this paper, we propose a new method to improve the performance of the widely recognized Location Aided Routing (LAR) algorithm. To this end, we suggest the concept of accessible zone combined with the basic two schemes associated with LAR algorithm. Through the proposed algorithm, we can confine the flooding area within accessible zone, thereby reducing the routing delay.

• ETRI Journal
• /
• v.43 no.3
• /
• pp.447-458
• /
• 2021

The quality of experience (QoE) of video streaming is degraded by playback interruptions, which can be mitigated by the playout buffers of end users. To analyze the impact of playout buffer dynamics on the QoE of wireless adaptive hypertext transfer protocol (HTTP) progressive video, we model the playout buffer as a G/D/1 queue with an arbitrary packet arrival rate and deterministic service time. Because all video packets within a block must be available in the playout buffer before that block is decoded, playback interruption can occur even when the playout buffer is non-empty. We analyze the queue length evolution of the playout buffer using diffusion approximation. Closed-form expressions for user-perceived video quality are derived in terms of the buffering delay, playback duration, and interruption probability for an infinite buffer size, the packet loss probability and re-buffering probability for a finite buffer size. Simulation results verify our theoretical analysis and reveal that the impact of playout buffer dynamics on QoE is content dependent, which can contribute to the design of QoE-driven wireless adaptive HTTP progressive video management.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.385-390
• /
• 2016

ELoran Systems can provide Position, Navigation, and Time services with comparable performance to Global Positioning Systems (GPS) as a back up or alternative system. High timing and navigation performance can be achieved by eLoran signals because eLoran receivers use "all-in-view" reception. This incorporates Time of Arrival (TOA) signals from all stations in the service range because each eLoran station is synchronized to Coordinated Universal Time (UTC). Transmission station information and the differential Loran correction data are transmitted via an additional Loran Data Channel (LDC) on the transmitted eLoran signal such that eLoran provides improved Position Navigation and Timing (PNT) over legacy Loran. In this paper, we propose a technique for adapting the delay time compensation values in eLoran timing receivers to provide precise time comparison. For this purpose, we have designed a system that measures time delay from the crossing point of the third cycle extracted from the current transformer at the end point of the transmitter. The receiver delay was measured by connecting an active H-field, an E-field and a passive loop antenna to a commercial eLoran timing receiver. The common-view time transfer technique using the calibrated eLoran timing receiver improved the eLoran transfer time. A eLoran timing receiver calibrated by this method can be utilized in the field for precise time comparison as a GNSS backup.

• Composites Research
• /
• v.13 no.1
• /
• pp.89-97
• /
• 2000

Fatigue damage detection and vibration sensing for a laminated composites and impact location detection for a steel beam have been carried out using optical fiber sensor. Intensity based optical fiber sensor is constructed by placing two cleaved fiber end in a hollow glass tube, and multiple reflection within the cavity is considered. Fatigue signals are measured by embedded optical fiber, surface mounted optical fiber sensor and strain gage simultaneously. For vibration sensing, optical fiber sensor is mounted on the carbon fiber composite beam and its response to free vibration and forced vibration is investigated. In impact location detection, two optical fiber sensors are used and the information obtained from two sensors is arrival time delay of vibration caused by impact. Impact location can be calculated from this time delay. The obtained results show that the intensity based optical fiber sensor provide reliable data during long-term fatigue loading, unlike strain gage which deteriorate during the early part of the fatigue test. Optical fiber sensor signals coincide with gap sensor in vibration sensing. The precise locations of impact can be detected within 4.1% error limit.

• Journal of the Korean Chemical Society
• /
• v.45 no.2
• /
• pp.111-115
• /
• 2001

The ignition of NH$_3$-NO-Ar mixtures was examined in the temperature renge of 1675-2391 K behind reflected shock waves. The ignition delay times were measured by monitoring pressure profiles and the OH emissions at 1.0 cm from the end wall. A correlation between ignition delay times and concentrations of gases could be summarized in the form of mass-action expression, To complement the experiment, computer modeling study of the ignition of NH$_3$-NO-Ar mixtures was carried out using various mechanisms reported previously. The sensitivity analysis shows the reaction of NH$_2$+NO${\rightarrow}$NNH+OH is the most important step in the ignition of NH$_3$-NO-Ar mixtures.

• Nutrition Research and Practice
• /
• v.7 no.3
• /
• pp.178-184
• /
• 2013

This study investigates the impact of exercises, coffee intakes, and physical trainings on fuel utilization in rats. Ninety-six rats were fed a control diet with either water (C) or coffee (CF; 0.12 g freeze-dried instant coffee/100 g body weight/d). Additionally, the animals go through physical training (TC and TCF) or no training (NTC and NTCF) for 4 weeks. For physical training, animals have to exercise on treadmills for 30 minutes (5 d per week, $15^{\circ}$ incline, 0.5-0.8 km/h). At the end of week 4, the animals in each group were subdivided into three exercise groups: before exercise (BE), during exercise (DE), and after exercise (AE). The DE rats exercised on treadmills for 1 hour immediately before being sacrificed. Hemoglobin, hematocrit, glucose, glycogen, protein, triglyceride (TG), and free fatty acid (FFA) levels in the plasma, liver, and skeletal muscle of the rats were compared accordingly. Organ weights were also measured. Coffee-training interaction had a significant impact on heart weight, visceral fat, hemoglobin, hematocrit, liver glycogen in DE and AE, and liver triglyceride in DE and AE. Exercise (meaning exercised on a treadmill for 1 hour immediately before being sacrificed) training interaction was significant in liver glycogen, muscle glycogen in control diet and control diet with coffee, FFA and muscle TG levels at control diet with coffee group. Exercise-coffee interactions significantly influenced the FFA with no training groups. Exercise-coffee-training interaction significantly effects on FFA, Liver TG and Muscle TG. Coffee intakes can increase lipolysis during exercising but coffee consumptions delay the recovery of liver glycogen levels in trained rats after exercising. Coffee intakes can increase lipolysis during exercising but coffee consumptions delay the recovery of liver glycogen levels in trained rats after exercising. Coffee can be an effective ergogenic aid during exercise for physically trained rats.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.19-28
• /
• 2005

It is of great economic importance to minimize the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine. The motor-driven cylinder lubricator was first developed fur a large two-stroke marine diesel engine made in $W{\ddot{a}}rtsil{\ddot{a}}a$ Switzerland Ltd. by the joint research of industry-university. In this study, the effects of revolution speed, plunger stroke and cylinder back pressure on maximum discharge and delivery pressures, delivery delay duration, and oil feed rate are experimentally investigated by the home-manufactured cylinder lubricator. The maximum discharge pressure with a spot of 0.03 m and the maximum loss pressure at spots of 5, 6.78 and i 0 m away from the end of lubricator slot are increased as plunger stroke, revolution speed and back pressure are elevated, and the delivery delay duration is shortened as plunger stroke, revolution speed and oil pipe length are increased. Also, oil feed rate is increased as plunger stroke and revolution speed are raised, but lowered as the back pressure is increased.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.2
• /
• pp.3-31
• /
• 2017

On 12 October 2017, the English Royal Courts of Justice delivered its decision about air carrier's compensation liability for the flight delay. In the cases the passengers suffered delays at a connecting point and, consequently, on arrival at their final destination. They claimed compensation under Regulation 261/2004 (the "Regulation"), as applied by the Court of Justice of the European Union (the "CJEU") in Sturgeon v. Condor [2009]. The principal issues were whether delays suffered by the passengers during the second leg of their respective journeys were compensable under the Regulation, whether there was jurisdiction under the Regulation and whether the right to compensation under the Regulation is, insofar as non-Community air carriers are concerned, excluded by virtue of the exclusive liability regime established under the Montreal Convention 1999. The passengers, the plaintiff, argued that the relevant delay was not that on flight 1 but that suffered at the "final destination". They maintained that there was no exercise by the EU of extraterritorial jurisdiction as the delay on flight 2 was merely relevant to the calculation of the amount of compensation due under the Regulation. The air carrier, the defendant, however argued that the only relevant flights for the purpose of calculating any delay were the first flights (flights 1) out of EU airspace, as only these flights fell within the scope of the Regulation; the connecting flights (flights 2) were not relevant since they were performed entirely outside of the EU by a non-Community carrier. Regarding the issue of what counts as a delay under the Regulation, the CJEU held previously on another precedents that the operating carrier's liability to pay compensation depends on the passenger's delay in arriving at the "final destination". It held that where the air carrier provides a passenger with more than one directly connecting flight to enable him to arrive at their destination, the flights should be taken together for the purpose of assessing whether there has been three hours' or more delay on arrival; and that in case of directly connecting flights, the final destination is the place at which the passenger is scheduled to arrive at the end of the last component flight. In addition, the Court confirmed that the Regulation applied to flights operated by non-Community carriers out of EU airspace even if flight 1 or flight 2 lands outside the EU, since the Regulation does not require that a flight must land in the EU. Accordingly, the passengers' appeal from the lower Court was allowed, while that of air carrier was dismissed. The Court has come down firmly on the side of the passengers in this legal debate. However, this result is not a great surprise considering the recent trends of EU member states' court decisions in the fields of air transport and consumer protection. The main goal of this article is to review the Court's decision and to search historical trend of air consumer protection especially in EU area.