• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.12
• /
• pp.12-20
• /
• 1993

In a conventional adaptive echo canceller, an ADF(Adaptive Digital Filter) with TDL(Tapped-Delay Line) structure modelling the echo path uses the LMS(Least Mean Square) algorithm to compute the coefficients, and NET detector using energy comparison method prevents the ADF to update the coefficients during the periods of the NET signal presence. The convergence speed of the LMS algorithm depends on the eigenvalue spread ratio of the reference signal and NET detector using the energy comparison method yields poor detection performance if the magnitude of the NET signal is small. This paper presents a new adaptive echo canceller which uses the pre-whitening filter to improve the convergence speed of the LMS algorithm. The pre-whitening filter is realized by using a low-order lattice predictor. Also, a new NET signal detection algorithm is presented, where the start point of the NET signal is detected by computing the cross-correlation coefficient between the primary input and the ADF output while the end point is detected by using the energy comparison method. The simulation results show that the convergence speed of the proposed adaptive echo canceller is faster than that of the conventional echo canceller and the cross-correlation coefficient yields more accurate detection of the start point of the NET signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12C
• /
• pp.1167-1176
• /
• 2009

In This Paper, we introduce an efficient IFFT design technique named for transmitter of OFDM (Orthogonal Frequency Division Multiplexing) system. In OFDM system, a cyclic prefix is inserted in forepart of OFDM symbol to prevent ICI(Inter-channel Interference) and ISI (Inter-symbol Interference). Attaching cyclic prefix causes delay in storing and copying IFFT result. The proposed IFFT removes this delay because its output is cyclic shifted by the length of cyclic prefix. So we can make a complete OFDM symbol by just copying the forepart of IFFT output to the end. In many cases, the length of cyclic prefix is 1/2n of FFT size, and this IFFT does not require additional hardware complexity and it does not cause any performance degradation.

• Journal of KIISE:Software and Applications
• /
• v.29 no.12
• /
• pp.957-965
• /
• 2002

Garbage collection in the CLDC typically employs a stop-the-world GC algorithm which is performing a complete garbage collection when needed. This technique is unsuitable for the interactive Java embedded system because this can lead to long and unpredictable delays. In this paper, We present a garbage collection algorithm which reduces the average delay time and supports the interactive environment. Our garbage collector is composed of the allocator and the collector. The allocator determines the allocation position of free-list according to object size, and the collector uses an incremental mark-sweep algorithm. The garbage collector is called periodically by the thread scheduling policy and the allocator allocates the objects of marked state during collection cycle. Also, we introduce a color toggle mechanism that changes the meaning of the bit patterns at the end of the collection cycle. We compared the performance of our implementation with stop-the-world mark-sweep GC. The experimental results show that our algorithm reduces the average delay time and that it provides uniformly low response times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.58-65
• /
• 2002

This paper deals with a delay problem in the endpoint detection of double-talk detection algorithm using correlation coefficient in the acoustic echo canceller. In case that past power is much bigger than current power like at the end of double-talking period, the power, estimated using forgetting factor, decreases slowly to cause a delay problem in the endpoint detection. In this paper, two methods are proposed to solve this problem. One is that the current power is periodically replaced by a new average power and the other is that the past power in recursive equation is periodically removed or replaced by other values. The simulation results show that proposed methods outperform conventional method in the endpoint of double-talking periods without increasing the computational burden much more.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1348-1356
• /
• 1991

The need for MAN(Metropolitan Area Network)has been increased by demands for high performance comuter communication. According to the definition of MAN by IEEE 802.6 MANs have diameter of about 50km, bandwidth of more than 1Mbps, and limited delay, Because optical fibers have unique characteristics that make them attractive for the implementation of MANs several fiber optic networks suitable for MAN application have been proposed. Those networks have drawbacks such as unlimited delay, many processing nodes and limited number of stations. Also IEEE 802.6 proposals and oters improved networks were proposed, but they have complicated access procedures and data buffering and difficulties in implementation. This paper descrives the design of Fiber Optic Metropolitan Area Network in Seoul(Seoul FOMAN) to overcome the drawback, Seoul FOMAN is hierarchical MAN and designed based on the topology of 43 end offices in Seoul. We propose MAN topology, proper access protocol and analyze the performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.578-583
• /
• 2013

The lighting devices using organic light emitting diodes (OLEDs) are actively researched because of the various advantages such as high power efficiency and 2-dimensitonal lighting emitting. To commercialize those OLED lighting devices, the manufacturing cost must be downed to comparable price with conventional light sources. Here, we demonstrate a reverse gravure-offset or gravure off-set printed metal electrode for the auxiliary electrode for OLED lighting devices. For the fabricated OLED's auxiliary electrode, we used Ag nano-paste and printed metal grid structure with a line width and spacing of several ten and hundred micrometer by using gravure-offset printing. In the end the printing metal grid pattern are successfully achieved by optimization of various experimental conditions such as printing pressure, printing speed and printing delay time.

• Journal of the Korean Society of Safety
• /
• v.5 no.2
• /
• pp.17-23
• /
• 1990

This study was performed by experiments with ASTM's apparatus for determination of autoignition temperature to obtain autoignition characteristics of 1-Heptene, 2-Heptene and 3-Heptene, respectively. As results, minimum autoignition temperatures (MAIT) of 1-Heptene, 2-Heptene and 3-Heptene were 246$^{\circ}C$, 248$^{\circ}C$ and 254$^{\circ}C$, respectively and each dropping volume of these temperatures was 0.25$m\ell$, 0.20$m\ell$ and 0.20$m\ell$. Instantaneous ignition temperatures measured at each dropping volume of Heptene were 371$^{\circ}C$, 357$^{\circ}C$ and 342$^{\circ}C$, respectively. Relation ignition delay time with ignition temperature at minimum autoignition temperature agreed well with Semenov's equation, and the values of apparent activation energy from this equation were 47Kca1/mo1 for 1-Heptene, 35Kca1/mo1 for 2-Heptene and 29Kca1/mo1 for 3-Heptene. It was found that the values of apparent activation energy decreased as the position of double bond changed from end to center in C-C chain.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.300-306
• /
• 2020

This study analyzes the distributor's inventory model in a two-stage supply chain consisting of the supplier, the distributor and the end customer. The supplier will allow a credit period before the distributor settles the account with him in order to stimulate the demand for the product he produces. It is also assumed that the distributor pays the shipping cost for the order and hence, the distributor's ordering cost consists of a fixed ordering cost and the shipping cost that depend on the order quantity. The availability of the delay in payments from the supplier enables discount of the distributor's selling price from a wider range of the price option in anticipation of increased customer's demand. As a result, the availability of a credit transaction leads to an increase in inventory levels. On the other hand, in the case of deteriorating products in which the utility of the product perish over time, the deterioration rate with time plays a role in reducing inventory levels. In this regard, we analyze the effect of the length of the credit period and the degree of product deterioration on the distributor's inventory level. For the analysis, we formulate the distributor's annual net profit and analyze the effect of the length of credit period and deterioration rate of the product on inventory policy numerically.

• Journal of Genetic Medicine
• /
• v.14 no.2
• /
• pp.86-89
• /
• 2017

Waardenburg syndrome (WS) is a rare genetic disorder, including clinical features of pigmentary abnormalities of irides, skin, hair and sensorineural hearing loss and facial dysmorphism. Among the four types, WS type IV (Waardenburg-Shah syndrome) additionally represents Hirschsprung's disease. Mutations in the SOX10, END3, or EDNRB genes are known to cause WS type IV. Here, we report a 6 year-old girl who was diagnosed as WS type IV by typical clinical manifestations, including skin hypopigmentation, heterochromia of both irides, unilateral sensorineural hearing loss, mild developmental delay and Hirschsprung's disease. The diagnosis was confirmed by molecular genetic analysis of EDNRB. Two novel EDNRB mutations were identified, and each mutation was segregated from each of her parents. During the follow-up period, the patient underwent a surgery for spleen torsion and was medically managed due to recurrent enterocolitis. Also, she suffered from impaired immunity including Hirschsprung's associated enterocolitis.

• Steel and Composite Structures
• /
• v.16 no.4
• /
• pp.437-454
• /
• 2014

The influence of spacers on the behaviour and ultimate capacity of intermediate length CFS open section columns under axial compression is investigated in this paper. The focus of the research lies in the cross- section predominantly, failed by distortional buckling. This paper made an attempt to either delay or eliminate the distortional buckling mode by the introduction of transverse elements referred herein as spacers. The cross-sections investigated have been selected by performing the elastic buckling analysis using CUFSM software. The test program considered three different columns having slenderness ratios of 35, 50 & 60. The test program consisted of 14 pure axial compression tests under hinged-hinged end condition. Models have been analysed using finite element simulations and the obtained results are compared with the experimental tests. The finite element package ABAQUS has been used to carry out non-linear analyses of the columns. The finite element model incorporates material, geometric non-linearities and initial geometric imperfection of the specimens. The work involves a wide parametric study in the column with spacers of varying depth and number of spacers. The results obtained from the study shows that the depth and number of spacers have significant influence on the behaviour and strength of the columns. Based on the nonlinear regression analysis the design equation is proposed for the selected section.