• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.71-81
• /
• 2013

Purpose - This study investigated the effects of consumers' selection criteria for environment-friendly agricultural products on purchase intention and the effects of consumers' attitudes and the reliability of environment-friendly agricultural products on purchase intention by using the theory of planned behavior. Subjective norms of variables of behavioral intention, attitudes toward behavior and control of the behavior were used to create selection criteria, consumers' attitudes and reliability of environment-friendly agricultural products. The study investigated the effects of consumers' selection criteria, attitudes, and reliability of environment-friendly agricultural products on purchase intention constructing models and hypotheses of mediation and moderation between selection criteria for agricultural products and purchase intention by consumers' attitudes and reliability. Research design, data, and methodology - The findings were as follows: first, consumers' selection criteria for environment-friendly agricultural products had a significantly affirmative influence upon purchase intention. Health was the most important factor of selection criteria convenience was more important than quality and familiarity was next. Consumers' attitudes and trust had a significant influence on purchase intention. Second, testing showed that consumers' attitude and trust partially mediated selection criteria: sub-factors and purchase intention were important in selection criteria. Third, testing showed that consumers' attitude and trust had a significant moderation effect between selection criteria and purchase intention. In the test of the moderation effect between sub-factors of selection criteria and purchase intention, consumers' attitude had a significantly positive influence upon health, convenience, and familiarity, and had no significant influence upon quality and purchase intention. Consumers' trust had no significant influence upon health, convenience, and quality. Results - The study provided several theoretical implications: first, an empirical analysis was undertaken with selection criteria for environmental-friendly agricultural products, consumers' attitude, and trust to investigate subjective norms, attitude toward behavior and control of behavior based on the theory of planned behavior. Second, this study investigated both the mediation effect and moderation effect of consumers' subjective norms on attitudes toward behavior, the mediating effects of perceived behavior control and changes of behavioral intention depending upon size and direction of the variables. This study also provided several practical implications. Conclusions - First, consumption of environment-friendly agricultural products did not increase despite rapid increase of production therefore, promotion of consumption and distribution was needed considering the supply and demand of the products. Second, definite standards for selection criteria were suggested to build up consumers' attitude and trust. Consumers' attitude could be improved by factors including the brand of environment-friendly agricultural products, consistent quality, solving physiological problems caused by adverse effects of environmental problems, supplementary approaches, treatment of adverse effects by eating food, and the development and supply of products in accordance with changes of lifestyle. Finally, consumers' demand for sub-factors of selection criteria could be much higher than health, convenience, and quality of the products. Therefore, a process was needed that could continuously check consumers' needs for the products. Limitations were described at the end of the study.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.288-295
• /
• 2021

This study was conducted to investigate the effect of end paper adsorbed with mask pack active ingredients on hair during permanent wave treatment. Permanent wave was performed with purchasing mask packs containing green tangerine, collagen, and Houttuynia cordate active ingredients among commercially available mask packs and adsorbing them to the end paper. As experimental methods, hair thickness, hair moisturizing power, tensile strength, hair epidermis observation using SEM, and hair constituent element analysis using EDS were performed. As a result of the experiment, it was confirmed that the experimental group treated with Houttuynia cordate active ingredient on the end paper had a hair protection effect as a result of hair thickness, tensile strength, hair epidermis observation, and hair component analysis. In addition, it was confirmed that the experimental group treated with green tangerine active ingredient on the end paper contained a relatively large amount of moisture in the hair moisturizing power test result. It is hoped that the development and research of various materials and tools will proceed so that basic cosmetic products containing active ingredients can be developed and used as hair cosmetics, and applied during chemical treatment in the industrial field.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.389-393
• /
• 2015

Recovery of indium from secondary sources have been attracting over years not only because of increasing demand together with development of flat panel display industry but also industrial criticality of indium. Applied technology to recover indium for recycling of end-of-life FPD devices can be broadly divided into three major steps, disassembly or dismantling, enrichment or upgrading, and refining or purification. In addition, advanced technology such as zone-refining can be employed for ultra-high purity products. In this mini-review, we present currently applied technologies for recovery of indium and the outlook for total recycling of FDP devices.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.79-84
• /
• 2006

In modem manufacturing, many products that have geometrically complicated features, including three-dimensional sculptured surfaces, are designed and produced. In the production of these complex-shaped mechanical components, e.g. automobile dies, molds, and various engineering applications, the ball-end milling process is one of the most widely used NC machining processes that consists of roughing, semi-finishing and finishing. In semi-finishing, cusps remained after roughing according to the used tools that have two patterns of stairs and wave shapes. These cusp shapes have air-cut in cutting and instability caused by high cutting speed that affects the cutting characteristics such as cutting force and tool wear. Cutting characteristics are measured and analyzed through cutting force, FFT analysis of cutting force and tool wear along cutting length according to low tool paths with same metal removal rate. As a results of the experiments, this study suggests the optimal conditions of tool path and cutting direction. This approach for the cutting characteristics of semi-finishing provides a useful aid for the productivity and efficiency improvements of NC machining processes.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.11
• /
• pp.1790-1798
• /
• 2019

Flock House virus (FHV), an insect RNA virus, has a bipartite genome. FHV RNA1 can be packaged in turnip yellow mosaic virus (TYMV) as long as the FHV RNA has a TYMV sequence at the 3'-end. The encapsidated FHV RNA1 has four additional nucleotides at the 5'-end. We investigated whether the recombinant FHV RNA1 could replicate in mammalian cells. To address this issue, we prepared in vitro transcribed FHV RNAs that mimicked the recombinant FHV RNA1, and introduced them into baby hamster kidney (BHK) cells. The result showed that the recombinant FHV RNA1 was capable of replication. An eGFP gene inserted into the frame with B2 gene of the FHV RNA1 was also successfully expressed. We also observed that eGFP expression at the protein level was strong at 28℃ but weak at 30℃. Sequence analysis showed that the 3'-ends of the RNA1 and RNA3 replication products were identical to those of the authentic FHV RNAs. This indicates that FHV replicase correctly recognized an internally-located replication signal. In contrast, the 5'-ends of recombinant FHV RNA1 frequently had deletions, indicating random initiation of (+)-strand synthesis.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.5
• /
• pp.219-225
• /
• 2018

In this paper, for the testing of tensile strength of dead-end clamp used in transmission line, resulting values were estimated by designing and producing the horizontal version of widely-used vertical tensile tester. Tensile strength test of dead-end clamp for transmission line is essential for quality test of products. Moreover, tensile tester is an equipment that requires high level of reliability which needs to be examined through sampling tests commensurate with total inspection. Frames of tensile tester were made up of H-beams so that it can endure more than 20 [tons] of load capability and the test was implemented for 60[seconds] applying five types of tension. In consequence, the tester could withstand up to 21,600[kg] of weight as well as all types of tension. This newly developed horizontal tensile tester can be utilized in figuring out properties of various materials by estimating tensile strength of materials such as metal, rubber and fiber.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.207-213
• /
• 2019

Assistance for the quality assurance management and developers to provide high quality software products. Using a bug record keeping system is exceptionally important in software progress, and it is followed vastly by majority of software producing companies in modern era. Regular application of a bug record keeping system is very helpful in developing software systems. We developed this system which helps the software testing team to keep a complete record of their testing activities during the software testing, also increases your confidence in the software quality, class and worth. Our proposed system offers trouble-free and effortless approaches to acquire desired information about bug, also produces different kinds of reports like summary reports, detailed reports etc. It gives facility to create, delete and update any project. Our developed application system is designed by using visual c# at front end and sql server 2008 management studio express at back end.

• IE interfaces
• /
• v.15 no.3
• /
• pp.218-229
• /
• 2002

This paper proposes how to develop the EC(Electronic Commerce) for industrial-related items, which has not been tried yet in EC areas. Usually industrial design derives an idea and concept for a new product from the needs of end-users and manufacturers. Then this product is developed through the design process such as idea-sketch, rendering, and design modeling mock-up. The purpose of this paper is to vitalize the trade for some items which are necessary for the design process and are intermediate products. That is, the idea and concept from the needs and seeds can be dealt with as one item. Furthermore, the idea-sketch and rendering materializing from the idea can be an item also. By doing so, excellent design items which could be thrown away in the middle of the process can be made into valuable commodities. Then we can specify the role of Designer, Manufacturer, and End-User as a buyer or a seller.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.45-51
• /
• 2003

Milling process has beer used in aircraft, auto-component and mold industries widely. They need more accurate and precise parts to improve the performance and quality of their products. So, the geometrical form accuracy of the workpiece surface generated by this process is getting more and more important. Generally, the form accuracy is affected by machine conditions, cutting conditions, tool geometry, tool deflection by cutting force and tool path md so on. Even though they are controlled as perfect conditions, it is easily found that there is a line along the axis of a cylindrically milled part. It is presumed that the tool approaching causes this error on milled surface. Thus, the study for investigating the effect of the tool approaching path on the cylindrical surface geometry of the end-milled part is carried out.

• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.143-149
• /
• 1981

Consumer consider the purpose for which they plan to use clothes when they purchase it, and the socks in textile products is evaluated in the same way. serviceability is judged by the extent to which the socks will be useful for its intended purpose. It should retain its original shape and size, good air permeability, good absorbency, good abrasion resistance, high fastness etc. Owing to importance of serviceability in socks, in this paper, these end-use requirement characteristics were tested. The results obtained were as follows: 1. Blend ratios were different between the indicated fiber contents on labels and the testing ones. 2. Air permeability was higher in the samples which contain less stitch density, and hydroscopicity was higher in those which contain natural fibers such as cotton and wool. 3. Shrinkage depended on the blend ratios of cotton and wool, and elastic recovery was better in the course direction than in the wale direction. 4. Pilling was conspicuous in the synthetic fibers such as polyester and nylon, and fastness of laundering and perspiration was higher in the fading grade than in the staining grade.