• Journal of Korean Society of Disaster and Security
• /
• v.16 no.2
• /
• pp.75-83
• /
• 2023

In general, bridges are facilities installed for the purpose of easily passing through sections such as valleys and rivers. Railway bridges that run through downtown areas are damaged due to external factors such as earthquakes and collisions with passing vehicles, resulting in serious human casualties. This can cause serious human and properties damage, such as functional paralysis in downtown areas. Depending on the degree of damage, repair work such as partial repair or full replacement is in progress for the bridge where the collision occurred. When damage or deformation occurs due to collision, the repair method is determined according to the degree of deformation and the degree to which the load capacity of the bridge is affected by the deformation. In this study, a numerical analysis review was performed on the repair work for the local deformation caused by the collision of a vehicle on an old railway bridge installed and in operation in an urban area. To this end, a structural safety review of the bridge for local deformations caused by vehicle collisions was conducted. In this paper, a repair method for the accident bridge was presented based on the analysis results.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.140-148
• /
• 2008

In this study, a numerical method for a time-domain acoustic wave backscattering analysis is established based on a physical optics and a Fourier transform. The frequency responses of underwater targets are calculated based on physical optics derived from the Kirchhoff-Helmholtz integral equation by applying Kirchhoff approximation and the time-domain signals are simulated taking inverse fast Fourier transform to the obtained frequency responses. Particularly, the adaptive triangular beam method is introduced to calculate the areas impinged directly by acoustic incident wave and the virtual surface concept is adopted to consider the multiple reflection effect. The numerical analysis result for an acoustic plane wave field incident normally upon a square flat plate is coincident with the result by the analytic time-domain physical optics derived theoretically from a conventional physical optics. The numerical simulation result for a hemi-spherical end-capped cylinder model is compared with the measurement result, so that it is recognized that the presented method is valid when the specular reflection effect is predominant, but, for small targets, gives errors due to higher order scattering components. The numerical analysis of an idealized submarine shows that the established method is effectively applicable to large and complex-shaped underwater targets.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.48-57
• /
• 2015

In a sodium-cooled fast reactor, which is a Generation-IV reactor, refueling is conducted by rotating, but not opening, the reactor head to prevent a reaction between the sodium, water and air. Therefore, an inspection technique that checks for the presence of any obstacles between the reactor core and the upper internal structure, which could disturb the rotation of the reactor head, is essential prior to the refueling of a sodium-cooled fast reactor. To this end, an ultrasound-based inspection technique should be employed because the opacity of the sodium prevents conventional optical inspection techniques from being applied to the monitoring of obstacles. In this study, a ranging inspection technique using a plate-type ultrasonic waveguide sensor was developed to monitor the presence of any obstacles between the reactor core and the upper internal structure in the opaque sodium. Because the waveguide sensor installs an ultrasonic transducer in a relatively cold region and transmits the ultrasonic waves into the hot radioactive liquid sodium through a long waveguide, it offers better reliability and is less susceptible to thermal or radiation damage. A 10 m horizontal beam waveguide sensor capable of radiating an ultrasonic wave horizontally was developed, and beam profile measurements and basic experiments were carried out to investigate the characteristics of the developed sensor. The beam width and propagation distance of the ultrasonic wave radiated from the sensor were assessed based on the experimental results. Finally, a feasibility test using cylindrical targets (corresponding to the shape of possible obstacles) was also conducted to evaluate the applicability of the developed ranging inspection technique to actual applications.

• Clean Technology
• /
• v.2 no.1
• /
• pp.96-108
• /
• 1996

$NO_x$ is mainly emitted from mixed acid pickling process in the stainless industry and its impact to the environment has been worried over. This study which may be considered as one of the development of clean technologies, differing from the traditional end pipe technology is about how to reduce $NO_x$ emission through the modification of corresponding process. This study consists of two parts. First, the influence of various reaction parameters in a acid pickling process on $NO_x$ emission was investigated. Second, the influence of hydrogen peroxide on $NO_x$ formation, which is known as inhibitor of $NO_x$ emission, was investigated. Major findings in this study are as follows. The important reaction parameters which have a great influence on $NO_x$ emission are the reaction temperature and the concentration of fluoric acid. The concentration of nitric acid, some of which results in $NO_x$ compound is not as important as the concentration of fluoric acid. Synthetic mixed acid of nitric acid and fluoric acid itself in absent of pickling plate contributed the $NO_x$ emission, however, its impact was negligible in terms of quantity. The addition of hydrogen peroxide to the acid pickling process significantly contributed to the reduction of $NO_x$ emission and successfully achieved 80% reduction of $NO_x$ emission at the condition of $9.51{\times}10^{-2}mole\;hydrogen\;peroxide/m^2$ pickling area. This result was compared to literature value from Avesta steel process, indicating a sixth of hydrogen peroxide addition of Avesta's in achieving a same amount of $NO_x$ reduction. The region of the economic hydrogen peroxide addition per unit area of plate to be pickled from the result of this study was established.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.361-367
• /
• 1984

In previous paper(Lee et al., 1984), preparation formula and processing conditions of the fish meat (mackerel) paste using dielectric heating were described, that included the proper shape and size of product and the conditions of dielectric heating, hot air dehydration, and heating with electric heater to yield the minimum expansion and case hardening during heating and to controll the final rater activity of 0.86 to 0.83 accompanying with a complete reduction of viable cells and good texture. In present study, changes in VBN, pH, total plate count, water activity, texture, the loss of available lysine, color indexes, TBA value, and the content of TI were determined to assess the quality stability and shelf-life of the product during the storage for 35 days at $5^{\circ}C\;and\;25^{\circ}C$, respectively. And the effect of vacuum sealing and hot water treatment before storage on the storage stability of product was also mentioned. As the product was vacuum packed in K-flex film bag, heat treated in boiling water for 6 minutes, and stored, water activity was maintained 0.86 to 0.84 for 35 days regardless of storage temperature, and the increase of total plate count was negligible in case of $5^{\circ}C$ storage while tended to gain slightly after 25 days at $25^{\circ}C$ storage. Changes in VBN was also minimum with an increase of 1.5 mg/100g at $5^{\circ}C$ and 7.0mg/100g at $25^{\circ}C$, but in case of unpacked sample, it was 24.5mg/100g at $5^{\circ}C$ and 42.4 mg/100g at $25^{\circ}C$ even after 7 days. In textural property hardness tended to increase after 28 days and folding test score was down to A or B from AA grade. The loss of available lysine was $7.5\%\;at\;5^{\circ}C$ and $17.0\%\;at\;25^{\circ}C$ but brown color was not deeply developed as the color index score indicated. TBA value was not increased at $5^{\circ}C$ while it tended to increase rapidly after 30 days at $25^{\circ}C$. Changes in TI content was not obvious except that it showed a tendency of increase at the end of storage as well as in the change of lysine and TBA value. It is concluded from the results that the quality of the product, pasteurized and water activity controlled by dielectric heating, and vacuum packed in K-flex film would be stable for more than 35 days at $5^{\circ}C$ and at least 25 days even at room temperature.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.145-153
• /
• 2009

The purpose of this study was to evaluate the effect of instrument compliance on the polymerization shrinkage stress measurements of dental composites. The contraction strain and stress of composites during light curing were measured by a custom made stress-strain analyzer, which consisted of a displacement sensor, a cantilever load cell and a negative feedback mechanism. The instrument can measure the polymerization stress by two modes: with compliance mode in which the instrument compliance is allowed, or without compliance mode in which the instrument compliance is not allowed. A flowable (Filtek Flow: FF) and two universal hybrid (Z100: Z1 and Z250: Z2) composites were studied. A silane treated metal rod with a diameter of 3.0 mm was fixed at free end of the load cell, and other metal rod was fixed on the base plate. Composite of 1.0 mm thickness was placed between the two rods and light cured. The axial shrinkage strain and stress of the composite were recorded for 10 minutes during polymerization. and the tensile modulus of the materials was also determined with the instrument. The statistical analysis was conducted by ANOVA. paired t-test and Tukey's test (${\alpha}<0.05$). There were significant differences between the two measurement modes and among materials. With compliance mode, the contraction stress of FF was the highest: 3.11 (0.13). followed by Z1: 2.91 (0.10) and Z2: 1.94 (0.09) MPa. When the instrument compliance is not allowed, the contraction stress of Z1 was the highest: 17.08 (0.89), followed by FF: 10.11 (0.29) and Z2: 9.46 (1.63) MPa. The tensile modulus for Z1, Z2 and FF was 2.31 (0.18), 2.05 (0.20), 1.41 (0.11) GPa, respectively. With compliance mode. the measured stress correlated with the axial shrinkage strain of composite: while without compliance the elastic modulus of materials played a significant role in the stress measurement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.415-455
• /
• 2019

This paper aimed to clarify the identity and category of the Jeong Jeongnyeol-je Chunhyangga from the perspective of the pansori transfer, while revealing the trajectory of Jeong Jeong-ryeol-je Chunhyangga, which remains in the modern pansori. Jeong Jeong-ryeol's Chunhyangga pansori part has been handed out to date, and except for the love song section, the pansori section, which corresponds to the love-separate-suffering-reunion paragraph, is almost complete. In the case of "Lee Doryeong enters Dongheon," "Hwangneungmyo song," and "The royal secret inspector visits Chunhyang's house to console her", there is a difference in pansori rhythm compared to Chunhyangga, which is currently held. "Why Yi Doryeong came to Chunhyang's House" is used in the form of an Aniri in the current Chunhyangga and "Chunhyang is treated as a virtuous woman in Namwon" is the only one included in Park Rokju's Changbon. "The royal secret inspector gathers people of Namwon to give a feast" is a new part that is not found in Chunhyangga, which is now being held, and can be seen as the Changgeuk sori of pursuing theatrical fun. On the other hand, this paper confirmed that the period between 1936 and 1937, when the Joseon Traditional Vocal Music Group actively performed Changgeuk and the record companies released a series of Changgeuk records, such as and , was an important time for the re-establishment of the Jeong Jeong-ryeol-je Chunhyangga, and that the Chunhyangga of those who had learned it before 1936-1937 was different from those who had learned it after that period. The preceding group includes Park Rok-ju, Kim Yeo-ran and Kim So-hee, while the latter group includes Kim Yeon-soo, Jung Kwang-soo, Park Dong-jin, Jung Kwang-soo and Kang Do-geun. In addition, except for Kim So-hee, these two groups are divided by the time they have learned Jeong Jeong-ryeol-je, whether they inherit the Jeong Jeong-ryeol-je from beginning to end, and by the gender of male and female singers. In teaching his pupils, Jeong Jeong-ryeol chose to use the "old-fashioned pansori" teaching method with impromptu plate-making in mind and the "modern pansori" teaching method with stereotyped sounds in mind. As a result, there were two aspects of Jeong Jeongryeol-je Chunhyangga's succession: a female singer-centered succession, which was held as learned from beginning to end, and a male singer-centered succession, which was held differently depending on the pansori schools or versions.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.4
• /
• pp.426-436
• /
• 2001

Background : Chronic obstructive pulmonary disease(COPD) is one of the major contributors to morbidity and mortality among the adult population. Cigarette smoking(CS) is undoubtedly the single most important factor in the pathogenesis of COPD. However, its mechanism is unclear. The current hypothesis regarding the pathogenesis of COPD postulates that an imbalance between proteases and antiproteases leads to the destructive changes in the lung parenchyma. This study had two aims. First, to evaluate the effect of CS exposure on histologic changes of the lung parenchyme, and second, to evaluate the effect of CS exposure on the expression of the gelatinolytic enzymes in BAL fluid cells in guinea pigs. Methods : Two groups of five guinea pigs were exposed to the whole smoke of 20 commercial cigarettes per day, 5 hours/day, 5 days/week, for 6weeks, and 12 weeks, respectively, using a smoking apparatus. Five age-matched guinea pigs exposed to room air were used as controls. Five or more sections were microscopically extamined(${\times}400$) and the number of cellular infiltration of the alveolar wall was measured in order to evaluate the effect of CS exposure on the histologic changes of lung parenchyme. The statistical significance was analyzed by a linear regression method. To evaluate the expression of the gelatinolytic enzymes in intraalveolar cells, BAL fluid was obtained and the intraalveolar cells were separated by centrifugation (500 g for 10 min at $4^{\circ}C$). Two sets of culture plates were loaded with $1{\times}10^6$ intraalveolar cells. One plate, contained O.1mM EDTA, a inhibitor of matrix metalloproteases(MMPs), and the other plate had no EDTA. Both plates were incubated for 48 hours at $37^{\circ}C$. After incubation, gelatinolytic protease expression in the supernatants was analyzed by gelatin zymography. Results : At the end of CS exposure, the level of blood carboxy Hb had increased significantly(4.1g/dl in control group, 24g/dl immediately after CS exposure, 18g/dl 30 min after CS exposure, 15g/dl 1 hour after CS exposure). Alveolar inflammatory cells were identified in the CS exposed guinea pigs. The number of alveolar cellular cells observed in a microscopic field ($400{\times}$) was $121.4{\pm}7.2$, $158.0{\pm}20.2$, $196.8{\pm}32.8$, in the control, the 6 weeks, and the 12 weeks group, respectively. The increased extent of inflammatory cellular infiltration of the lung parenchema showed a statistically significant linear relationship with the duration of CS exposure(p=0.001, $r^2=0.675$). Several types of gelatinolytic enzymes in the intraalveolar cells of CS exposed guinea pigs were expressed, of which some were inhibited by EDT A. However, the gelatinolytic enzymes were not expressed in the control groups. Conclusion : CS exposure increases inflammatory cellular infiltration of the alveolar wall and the expression of gelatinolytic proteases in guinea pigs. EDTA inhibits some of the gelatinolytic proteases. These findings suggest a possibility that CS exposure may increase MMP expression in the lungs of guinea pigs.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.1041-1050
• /
• 2005

This study was conducted to investigate the quality characteristics of seasoned pork prepared by Korean traditional 4 types seasoning such as soy sauce (T1); Kimchi sauce (T2); pickled shrimps sauce (T3) and onion sauce (T4). The samples were seasoned by the proportion of meat to seasonings (1:1). The seasoned samples were aged at $1{\pm}1^{\circ}C$ for 30 days. The results obtained were as follows; pH of T3 was higher (p<0.05) than other treatments during aging periods. Saccharinity and salinity were higher in T1. Except T3, water holding capacity (WHC) have no significantly (p>0.05) different during the aging. Shear force and Volatile basic nitrogen (VBN) were increased in T1 and T4 with aging periods. TBARS have no significantly (p>0.05) different in all treatments at the 1 day of aging, however T1 was significantly higher (p<0.05) compared with other treatments after 10 days of aging. In surface meat color, a* and b* were higher in T2 and lower in T4 with aging periods. In inner meat color, L* was decreased in all treatments with aging periods, however T4 was no significantly (p>0.05) different during aging periods. a* and b* were increased with aging periods in all treatments. Total plate counts was increased at the 10 days of aging and decreased at the end of aging. Escherichia coli of T1, T2 and T3 were decreased with aging periods, however T4 was significantly (p<0.05) increased with aging periods. Lactobacilli spp. of T2 and T3 were higher than other treatments at the beginning of aging. In sensory evaluation, T4 was higher at the beginning of aging, however T1 and T3 were increased sensory evaluation value with aging periods.