• Journal of Microbiology and Biotechnology
• /
• v.19 no.7
• /
• pp.698-708
• /
• 2009

High rate sulfate reduction under acidic conditions opens possibilities for new process flow sheets that allow the selective recovery of metals from mining and metallurgical waste and process water. However, knowledge about high-rate sulfate reduction under acidic conditions is limited. This paper investigates sulfate reduction in a membrane bioreactor at a controlled pH of 5. Sulfate and formate were dosed using a pH-auxostat system while formate was converted into hydrogen, which was used for sulfate reduction. Sulfide was removed from the gas phase to prevent sulfide inhibition. This study shows a high-rate sulfate-reducing bioreactor system for the frrst time at pH 5, with a volumetric activity of 188 mmol $SO_4^{2-}$/I/d and a specific activity of 81 mmol $SO_4^{2-}$volatile suspended solids/d. The microbial community at the end of the reactor run consisted of a diverse mixed population including sulfate-reducing bacteria.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.3
• /
• pp.351-363
• /
• 2008

This paper is concerned with tasking and guidance of networked airborne sensors to achieve fault-tolerant sensing. The sensors are coordinated to locate hostile transmitters by intercepting and processing their signals. Faults occur when some sensor-carrying vehicles engaged in target location missions are lost. Faults effectively change the network architecture and therefore degrade the network performance. The first objective of the paper is to optimally allocate a finite number of sensors to targets to maximize the network life and availability. To that end allocation policies are solved from relevant Markov decision problems. The sensors allocated to a target must continue to adjust their trajectories until the estimate of the target location reaches a prescribed accuracy. The second objective of the paper is to establish a criterion for vehicle guidance for which fault-tolerant sensing is achieved by incorporating the knowledge of vehicle loss probability, and by allowing network reconfiguration in the event of loss of vehicles. Superior sensing performance in terms of location accuracy is demonstrated under the established criterion.

• Journal of the Korean Society of Costume
• /
• v.51 no.5
• /
• pp.17-28
• /
• 2001

The purposes of this study were to arrange and analyze the Oriental Mode in 20th century fashion and to clarify that Oriental dress and its ornaments appearing as the main subject of Occident fashion gradually The results were as follows : First, Oriental Mode in 1900-1950s was prescribed as the 'Orientalism' to be expressed Occidental imperialistic viewpoint. Therefore, the Orient was used as the simple recording mark of the imperialism product or commercial motive and it was reflected in fashion. Second, it was explained in 1960-1970s as the 'Folklore Orientalism' that focus was moved into the folklore costume of Orient. Third, in 1980s, 'Ethnic' was conspicuous that reflected the traditional costume in the area of non-christianity. Especially, it was the decade that the Middle East attracted attention. Fourth, Oriental Mode in 1990s appeared as the 'Fusion' that Oriental and Occidental elements were mixed and compromised on equal terms. Fifth, it was expressed as a word 'Zen' that had natural fiber, moderate color and silhouette to be most basic and concise about human body at the end of 1990s. This study could confirm that the center of fashion was being converted into the Orient gradually. This may be understood as the pluralistic culture phenomenon. Namely, eclectic principle to recognize mutual style and individualistic nature and to utilize and mix was made, and this brought the conversion into Oriental sense of value.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.365-370
• /
• 2009

LCA is a tool to support for making decisions by offering information of environmental aspects of products or services. It can be used to make decisions to consumers and NGOs as well as government and enterprises. LCA evaluates the environmental aspects throughout the entire life cycle of a product. Therefore it can quantify and assess environmental impacts from raw material acquisition, manufacturing, distribution, use and disposal to end of life and recycling. The demands of the recycling rate increase and the use of suitable materials for RoHS, REACH, WEEE, ELV which are linked trade with environmental regulation have increased the worldwide. Global warming is the critical challenge of the world facing. And under post-Kyoto protocol each country has to prepare for target reduction, so it became essential to save energy and resources. In addition that, the carbon mark has been run as the way of showing example of CO2 reduction in domestic and it will be extended gradually. And also through the introduction of Eco-label, environmentally-friendly product will be promoted. When those systems are operated, global warming gases (i.e. CO2) can be calculated throughout the entire life of the products by LCA. And the environmental impacts such as harmful material emission in the process of manufacturing, energy consumption, distribution and so on, can also be assessed. Therefore, The basic concepts of LCA technique and various cases and the practical application in the future will be review in this study.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.16 no.1
• /
• pp.57-63
• /
• 2010

The palpation of spinous process and transverse process of vertebra are important part of the assesment and treatment from Orthopedic manual therapy. But the palpation area is descriptive differently each of literatures. So we generally got these outcomes. : There are C2, C3, C4 and C6 process as a bony landmarks and these are important part of establish the precise location of pain appears from cervical spine. Even though C7 process regard a prominent part, it is hard to distinguish C6 and process of T1. Thru that differentiation, grab the patient's forehead and try them cervical and hyper-extension check any movement of process or put on the fingers on C7 preocess and check the movement. The palpation of thoracic spine process is the land mark which determines general level orientation in the spine easily, there are T2, T7 spinous process. However, It is depends on how do you test the patient's arm when you palpate it and it can effect on spinous process. The transverse process of C1 is the only spot for palpation in cervical spine, and T1-3, T12 transverse process can palpate it when it stands on the process. The end of T4-6, T11 is placed on middle on vertebra of transverse process and transverse process. T7-9, T10 transverse process is place on same position as spinous process which is upper part of the spine.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.77-82
• /
• 2006

Integrity plays a fundamental role in the feasibility of 'liability critical' applications. Road charging, e.g. road tolling in urban zones or on highways, represents a series of liability critical applications where a guarantee in integrity could be a true enabler: being the mechanism that prevents the incorrect charging of users and enabling the advancement of these applications using GNSS such as Galileo and EGNOS that provide integrity mechanisms. However, the integrity of the end user position is not guaranteed by the EGNOS and Galileo integrity services alone as provided. Algorithms have been developed to supply a guarantee on the performance attainable at the user level through the provision of a horizontal protection level that responds to local user conditions such as multipath or interference. In addition, an application has been developed that implements road charging mechanisms based on the availability of user-level integrity. Results obtained show that the user-level integrity algorithms provided the required level of integrity guarantee and granularity of the horizontal protection levels necessary for executing urban and rural (highway) road charging. In addition, the road charging application developed shows that the current application domain requirements can be met through the provision of guaranteed integrity and that further reductions in the horizontal protection levels along with increased signal availability will enable future road charging modalities.

• Steel and Composite Structures
• /
• v.46 no.5
• /
• pp.621-635
• /
• 2023

The combination of replaceable and repairable properties in structures has introduced new approach called "Low Damage Design Structures". These structural systems are designed in such a way that through self-centering, primary members and specific connections neither suffer damage nor experience permanent deformations after being exposed to severe earthquakes. The purpose of this study is the seismic assessment of steel moment resisting frames with the aid of rigid rocking cores. To this end, three steel moment resisting frames of 4-, 8-, and 12-story buildings with and without rocking cores were developed. The nonlinear static analysis and incremental dynamic analysis were performed by considering the effects of the vertical and horizontal components of 16 strong ground motions, including far-fault and near-fault arrays. The results reveal that rocking systems benefit from better seismic performance and energy dissipation compared to moment resisting frames and thus structures experience a lower level of damage under higher intensity measures. The analyses show that the interstory drift in structures equipped with stiff rocking cores is more uniform in static and dynamic analyses. A uniform interstory drift distribution leads to a uniform distribution of the bending moment and a reduction in the structure's total weight and future maintenance costs.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.5
• /
• pp.379-387
• /
• 2006

The real world is spatially modelled conceptually either as discrete objects or earth surface. The generated data models are then usually represented as vector and raster respectively. Although there are limited cases where only one data model is sufficient to solve the spatial problem at hand, it is now generally accepted that GIS should be able to handle various types of data model. Recent advances in spatial technology introduced even more variety of heterogeneous data models and the need is ever growing to handle and manage efficiently these large variety of spatial data. The OGC (Open GIS Consortium), an international organization pursuing standardization in the geospatial industry. recently introduced the GMLJP2 (Geographic Mark-Up Language JP2) format which enables store and handle heterogeneous spatial data. The GMLJP2 format, which is based on the JP2 format which is an abbreviation for JPEG2000 wavelet image compression format, takes advantage of the versatility of the GML capabilities to add extra data on top of the compressed image. This study takes a close look into the GMLJP2 format to analyse and exploit its potential to handle and mange hetergeneous spatial data. Aerial image, digital map and LIDAR data were successfully transformed end archived into a single GMLJP2 file. A simple viewing program was made to view the heterogeneous spatial data from this single file.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.140-159
• /
• 1994

Heraldry, which originated from the culture of knights in the 12th century, came to be drawn on shields, and was inherited as a symbol of the family at the end of the 12th century and developed rapidly through the 13th and 14th century. Afterwards heraldry was in great vogue and used in the shields, clothes of men and women, armors, housings and flags. Therefore the citizen class as well as nobles and knights came to possess heraldry. In particular parti-color and impaled coat were accepted in the clothes, and served the dual purpose of status symbol and ornament in the 13th century. It can be said that the appearance of heraldry on the clothes was typical of the Middle Ages. The origin, generally accepted, was that the crusaders wore the surcots, also known as the cyclases, on the armors to prevent the powerful sun of Syria and dust of deserts, and to prevent the armors from rusting due to moisture. As the surcot was made of white linen or white silk till the beginning of the 13th century, knight's heraldry came to be put on the surcot in order to identify each corps. According as the coat of mail covering all the body was devised, the same heraldry attached on the shield seemed to appear on the clothes of surcot or jupon(afterwards pourpoint) in order to identify the status in the battlefield and tournament. Heraldry, a system of mark in the 12th century, was used as a symbol of authority of the upper class such as the Royal House, nobles and knights, and may have been mysterious instruments in the Milddle Ages. However, in the modern times of the 20th century heraldry has come to be a kind of symbol marks such as badges and banners symbolizing the hallmark of the goods of enterprises, organizations and groups. Heraldry, existing up to now, of the individuals as well as international organizations can be seen as a result of deep-rooted tradition for esthetic appreciation and symbolism for heraldry.

• Plant Biotechnology Reports
• /
• v.5 no.2
• /
• pp.169-175
• /
• 2011

In this study, the JIP test was exploited to assess drought-tolerance of transgenic rice overexpressing OsNAC10. Two types of promoters, RCc3 (root-specific) and GOS2 (constitutive), were used to drive the transcription factor OsNAC10, a gene involved in diverse functions including stress responses. Three-month-old plants were exposed to drought for 1 week and their fluorescence kinetics was evaluated. Our results showed that drought-treated non-transgenic plants (NT) have higher fluorescence intensity at the J phase (2 ms) compared to transgenic plants, indicating a decline in electron transport beyond the reduced plastoquinone ($Q_A^-$). As manifested by negative L bands, transgenic plants also showed higher energetic connectivity and stability over NT plants under drought conditions. Also, the pool size of the end electron acceptor at the photosystem I was reduced more in NT than in transgenic plants under drought conditions. Furthermore, the transgenic plants had higher $PI_{total}$, a combined parameter that reflects all the driving forces considered in JIP test, than NT plants under drought conditions. In particular, the $PI_{total}$ of the RCc3:OsNAC10 plants was higher than that of NT plants, which was in good agreement with their differences in grain yield. Thus, the JIP test proved to be practical for evaluating drought-tolerance of transgenic plants.