• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.1
• /
• pp.95-102
• /
• 2023

This study investigated the structural performance of wire-integrated steel decks with varied lattice end support conditions through finite element analysis. The results indicated that the steel decks with the lattice foots positioned above the supporting structural member have the higher system stiffness compared to the cases with the lattice foots shifted away from the support. It is also observed that the contribution of the end vertical bars on both the system stiffness and the strength is negligible when the lattice foots are located on the support. It is, especially, revealed that the end vertical bars can be eliminated when the lattice foot length is not smaller than 40mm. The ultimate load-carrying capacity of the system is not significantly affected by the lattice end support condition. The failure mode of the system is the top bar buckling at the center of the deck plate, the lattice end buckling, and the combination of both depending of design intention.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.109-116
• /
• 2002

We propose a novel very short (< $300{\mu}m$) vertical directional coupler switch with high extinction ratios larger than 30 dB. The device consists of a switching operation induced section (SOIS), an extinction ratio adjusted section (ERAS), and an extinction ratio enhanced section (ERES). These are achieved by changing the refractive index of one core. The switching operation is induced by changing the refractive index of one core in the SOIS. The improvement of extinction ratios larger than 30 dB for both the cross and bar states is made by controlling the asymmetry of the refractive indices of both cores in the ERES. Through the ERAS, different extinction ratios between the cross and bar states at the end of the SOIS are changed to the same value. For this reason, the optimum asymmetry of the refractive indices of the cores for the maximum extinction ratios and the lengths of ERES are the same for cross and bar states. Design guidelines for high extinction ratios with large tolerances are presented.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.5
• /
• pp.31-40
• /
• 2002

We propose a novel ultra-short asymmetric vertical directional coupler switch (VDCS) with high extinction ratios larger than 30㏈ composed of switching operation induced section (SOIS), extinction ratio adjusted section (ERAS), and extinction ratio enhanced section (ERES). In this VDCSs, switching operation is achieved by changing the refractive index of one core in SOIS. The improvement of extinction ratios larger than 30㏈ for both cross and bar states is achieved by controlling the asymmetry of refractive indices between both cores in ERES. After propagating through ERAS with symmetry in the structure, different extinction ratios between cross and bar states at the end of SOIS are changed to the same value. For this reason, the optimum asymmetry of the refractive indices of cores to have the maximum extinction ratios and the lengths of ERES are the same for cross and bar states. Design guidelines to achieve high extinction ratios with large tolerances are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1181-1185
• /
• 1991

Unlike printed character, the recognition of Hand written one has various kinds of difficulties due to the existence of the huge pattern associated with the person who writes. Therefore, in general, recognition of Hand written characters requires an algorithm which takes into consideration of the individual differences. Hangul characters are basically made of straight lines and circles. They can be represented in terms of feature parameters such as the end point of the straight line, the length and the angle. Then all Hangul characters can be represented by the number of basic segments(-, /, vertical bar, O) multiplied by the feature parameters respectively. In this study we propose a method for recognizing Hand written Hangul characters in terms of fuzzy inference.

• Korean Journal of Acupuncture
• /
• v.18 no.1
• /
• pp.105-116
• /
• 2001

We examined and referred to some literatures on the meaning, Dai meridian and Meridian points of joining with circulation of Dai meridian through literatures of every generation. And then we came to get a few conclusions as follows. 1. Dai meridian starts below the hypochondriac region. Running obliquely downward, it runs transversely around the waist like a belt. Its function is to bind up all the meridians to circulate in a proper way. 2. The coalescent points of dai meridian are $D\grave{a}im\grave{a}i$(帶脈), $W\check{u}sh\bar{u}$(五樞) and $W\acute{e}id\grave{a}o$(維道). 3. Location of $D\grave{a}im\grave{a}i$(帶脈) is on the lateral side of the abdomen, 1.8 cun below $Zh\bar{a}ngm\grave{e}n$(章門), at the crossing point of vertical line through the free end of the 11th rib and a horizontal line through the umbilicus. Location of $W\check{u}sh\bar{u}$(五樞) is on the lateral side of the abdomen, anterior to the anterosuperior iliac spine, 3 cun below the level of the umbilicus. Location of $W\acute{e}id\grave{a}o$(維道) is on the lateral side of the abdomen, anterior and inferior to the anterosuperior iliac spine, 0.5 cun anterior and inferior to $W\check{u}sh\bar{u}$(五樞). 4. Indication of $D\grave{a}im\grave{a}i$(帶脈) is irregular menstruation, leukorrhea with reddish discharge, hernia, pain in the lumbar and hypochondriac region. Indication of $W\check{u}sh\bar{u}$(五樞) is prolapse of the uterus, leukorrhea with reddish discharge, irregular menstruation, hernia, pain in the lower abdomen, constipation and lumbosacral pain. Indication of $W\acute{e}id\grave{a}o$(維道) is edema, pain in the side of the lower abdomen, prolapse of the uterus, hernia and morbid leukorrhea. 5. The Dai meridian binds all meridians, produces pregnancy, grasps lumbar and abdomen region and controls leukorrhea. 6. Diseases of the Dai meridian manifested as distention and fullness in the lumbar region and abdomen, leukorrhea with reddish discharge, pain the navel, lumbar and spinal regions, flaccidity and hypoactivity of the lower limbs, etc.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.4
• /
• pp.419-431
• /
• 2001

This study was to investigate structural behavior of composite structure beams composed of end-RC. center-Steel according to respective reinforcing method for connection zone composed of different materials (SRC) while attaching main bars on steel-flange by welding. The main reinforcing methods are as follows ; non-reinforcing, vertical shear reinforcing (type-stirrup), inclined reinforcing(type-x), horizontal reinforcing(type-web, 0.3L), double horizontal reinforcing (type-web, 0.3L), vertical reinforcing (type-flange, 0.3L). Consequently, It showed little difference in structural properties like ductility and strength according to the attaching method of main bars. For Maximizing the structural properties of composite beam, the most effective methods were vertical reinforcing one and double horizontal reinforcing one.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.127-138
• /
• 2018

In this study, the operational characteristics of a domestic vegetable transplanter were investigated. The main functional components and power path of the tranplanter were analyzed. The link structure of transplanting device waskinematically analyzed, and 3D modeling and dynamic simulation were performed. Based on this analysis, the trajectory of the bottom end of the transplanting hopper was analyzed. Also, the plant spacing according to the engine speed and the shifting stage of transplanting transmission was analyzed and verified by field test. As main results of this study, the transplanting device is one degree of freedom(DOF) 4-bar link type mechanism which comprises 10 links and 13 rotating joints. The transplanting hopper plants seedlings in a vertical direction while maintaining a constant posture by the links of transplanting device. The power is transmitted to both the driving part and transplanting part from the engine, and the maximum and minimum plant spacing of the transplanting device were 428.97 mm and 261.20 mm.

• Journal of the Korean earth science society
• /
• v.30 no.4
• /
• pp.454-463
• /
• 2009

In this study, from January 2006 to February 2009, we observed 107 ice spikes formed in a natural state, and analyzed their environment. We developed an experimental device to reproduce ice spikes in laboratory and successfully made 531 ice spikes. We analyzed the process of the formation and the principle of how those ice spikes grow through videotaped data of the formation in the experiment. In the natural world, when the surface of water and the lower part of a vessel begin to freeze, a vent (breathing hole) develops at the surface where an ice is not frozen; this vent serves as the seed of an ice spike. It is assumed that the volume expansion of ice in the vessel which occurs when water freezes makes the supercooled water go upward through the vent and becomes an ice bar called an ice spike. In the laboratory, however, when distilled water is poured into an ice tray cube and kept in the experimental device for about one and a half hours at a temperature of -12- $-13^{\circ}C$, a thin layer of ice then begins to develop on the surface of the water, the vent is formed, and ice spikes form for about 10-30 minutes. These spikes stop growing when the end becomes clogged. Ice spikes can be described as falling into seven categories of shape, with the apex type topping the list followed by the slant type in the natural state and the vertical type predominating in the laboratory.