• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.10a
• /
• pp.246.1-246
• /
• 1979

A glucose-limited “pH-stat” continuous culture study of Lactobacillus bulgaricus NLS-4 in an anaerobic condition showed the marked effects of environmental pH on end products, fermentation blances and bioenergetic aspects of the organism. Lactic acid was the major end product of fermentation with minor products, such as acetic acid, formic acid and ethanol throughout the pH range tested. In acidic conditions below pH 6.5, a typi-cal pattern of homofermentation was revealed whereas in alkaline conditions, the metabolic pattern was changed from homofermentation to heterofermentation and led to acquire much energy. This metabolic change was likely due to the pH-dependent lactate dehydrogenase activity. Molar growth yields (Yglc=35.5-44.4) and YATP, $18.5\pm2.5$ in average which was 80％ higher than the value ever postulated seemed to be accounted for less requirement of maintenance energy of the organism in the culture conditions.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.4
• /
• pp.237-250
• /
• 2015

This paper describes a hardware-oriented algorithm and its conceptual implementation in a real-time speed limit traffic sign detection system on an automotive-oriented field-programmable gate array (FPGA). It solves the training and color dependence problems found in other research, which saw reduced recognition accuracy under unlearned conditions when color has changed. The algorithm is applicable to various platforms, such as color or grayscale cameras, high-resolution (4K) or low-resolution (VGA) cameras, and high-end or low-end FPGAs. It is also robust under various conditions, such as daytime, night time, and on rainy nights, and is adaptable to various countries' speed limit traffic sign systems. The speed limit traffic sign candidates on each grayscale video frame are detected through two simple computational stages using global luminosity and local pixel direction. Pipeline implementation using results-sharing on overlap, application of a RAM-based shift register, and optimization of scan window sizes results in a small but high-performance implementation. The proposed system matches the processing speed requirement for a 60 fps system. The speed limit traffic sign recognition system achieves better than 98% accuracy in detection and recognition, even under difficult conditions such as rainy nights, and is implementable on the low-end, low-cost Xilinx Zynq automotive Z7020 FPGA.

• International Journal of Oral Biology
• /
• v.46 no.3
• /
• pp.146-153
• /
• 2021

Accurate identification of microbes facilitates the prediction, prevention, and treatment of human diseases. To increase the accuracy of microbiome data analysis, a long region of the 16S rRNA is commonly sequenced via paired-end sequencing. In paired-end sequencing, a sufficient length of overlapping region is required for effective joining of the reads, and high-quality sequencing reads are needed at the overlapping region. Trimming sequences at the reads distal to a point where sequencing quality drops below a specific threshold enhance the joining process. In this study, we examined the effect of trimming conditions on the number of reads that remained after quality control and chimera removal in the Illumina paired-end reads of the V3-V4 hypervariable region. We also examined the alpha diversity and taxa assigned by each trimming condition. Optimum quality trimming increased the number of good reads and assigned more number of operational taxonomy units. The pre-analysis trimming step has a great influence on further microbiome analysis, and optimized trimming conditions should be applied for Divisive Amplicon Denoising Algorithm 2 analysis in QIIME2 platform.

• Korean Journal of Food Science and Technology
• /
• v.33 no.5
• /
• pp.596-602
• /
• 2001

This study was conducted to find out optimum conditions of kanjang fermented with barley bran. Fermentation conditions for optimization of taste of kanjang made with barley bran was investigated with response surface methodology. Optimal conditions of salty taste was as follows, the content of meju: 15%, the content of salt: 7%, initial temperature: $24^{\circ}C$, middle temperature: $29^{\circ}C$ and end temperature: $14^{\circ}C$. Optimal conditions of palatable taste was as follows, the content of meju: 24%, the content of salt: 13%, initial temperature: $26^{\circ}C$, middle temperature: $25^{\circ}C$ and end temperature: $20^{\circ}C$. Optimal conditions of bitter taste was as follows, the content of meju: 28%, the content of salt: 18%, initial temperature: $35^{\circ}C$, middle temperature: $10^{\circ}C$ and end temperature: $38^{\circ}C$. Optimal conditions of overall acceptability was as follows, the content of meju: 15%, the content of salt: 19%, initial temperature: $30^{\circ}C$, middle temperature: $38^{\circ}C$ and end temperature: $23^{\circ}C$.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.209-214
• /
• 2002

Mechanical micro-engineering is an easy and cheap way to fabricate micro-structures. If the application of the conventional machining method using flat-end mill becomes available for the micro-manufacturing process, it will be advanced as an extension of the conventional machining process. In this study, micro-grooves cutting using flat-end mill(($\phi$8) was performed. The characteristics on flat-end milling was investigated to improve machinability of micro-grooves. The experiments were performed according to variations of spindle revolution, depth of cut, and feed rate. Machinability through various cutting conditions was evaluated by surface geometry, tool wear, and cutting force. The results show that micro V-grooves of width(pitch) 29${\mu}{\textrm}{m}$ were acquired by flat-end milling. The maximum and minimum roughness of the wall of grooves was 438 and 67nm, respectively

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2191-2201
• /
• 2000

End effects due to sectional deformations of thin-walled beams with closed cross section are analysed by a one-dimensional theory. In particular, end effects associated with warping (out of plane m otion) and distortion (in plane motion) are investigated. The exact solutions as a vector form are newly derived to reveal slowly-decaying nature of the end effects in a thin-walled beam loaded by a couple. Several examples of thin-walled beams under various loading conditions indicate that the local end effect zone due to warping and distortion is approximately ten times the typical beam width.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.38-43
• /
• 2006

A slot cut in end milling processes is one of the laborious works because the cutting force is likely to deflect the tools excessively, then to make large errors or to fracture the tool. This difficulty is owing to the poor stiffness of slender shaped end mills. Though, in most cases, additional finish cuts are followed after rough cuts, the accuracy of rough cuts is still important because it affects the final accuracy after finish cuts and productivity. The accuracy in slot cuts depends on the tool stiffness and the cutting conditions including depth of cut and feed. In order to meet the desired accuracy, diameter of end mill and cutting allowance have to be selected carefully. This study suggests several guidances for selecting the end mill diameter and the slot cut allowance to improve machining accuracy and productivity in slot end millings. Some experiments were done with the various cutting parameters of tool diameter, depth of cut and feed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.196-201
• /
• 1997

The biggest challenge facing today's manufacturing industry is better quality and high productivit. From an economic point of view, productivity is the most important parameter, as high productivity will reduce the cost. However, the customers of today are not only cost concerned, but also quality conscious. So high accuracy levels should also be achieved in the manufacturing process. The aim of this paper is to get a comprehensive understanding of its machinability properties and to investigate the relationship between cutting conditions and surface roughness for Ball End Mill cutting process so as to enhance its practical application.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.2 no.1
• /
• pp.27-30
• /
• 1978

Conditions for increasing heat transfer by increasing uniform circular fin length are investigated. When free end of the fin is not thermally insulated, correction fin length, which gives equal heat transfer from an insulated end fin, is given. Optimum design of a uniform circular fin based on the equivalent fin with insulated end is given.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.65-70
• /
• 2023

In this paper, we propose an autonomous driving system using an end-to-end model to improve lane departure and misrecognition of traffic lights in a vision sensor-based system. End-to-end learning can be extended to a variety of environmental conditions. Driving data is collected using a model car based on a vision sensor. Using the collected data, it is composed of existing data and data with outlayers removed. A class was formed with camera image data as input data and speed and steering data as output data, and data learning was performed using an end-to-end model. The reliability of the trained model was verified. Apply the learned end-to-end model to the model car to predict the steering angle with image data. As a result of the learning of the model car, it can be seen that the model with the outlayer removed is improved than the existing model.