• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.71-81
• /
• 2000

This paper describers a look ahead algorithm of PC-NC(personal computer numerical control). The algorithm is based on acceleration/deceleration before interpolation which doesn\`t include a command error and determines a feedrate value at the end point of each block(or start point of each block). The algorithm is represented as following; 1) calculating two maximum arrival feedrates(F$_1$,F$_2$) by an acceleration value, a command feedrate, and the distance of a NC block, 2) getting a tangent feedrate (F$_3$) of the adjacent blocks, 3) choosing a minimum value among these three feedrates, and 4) setting the value to a feedrate of a start point of the next block(or a end point of the previous block). The proposed look ahead algorithm was implemented and tested by using a commercial TROS(real time operation system) on the MS-Windows NT 4.0 in a PC platform. For interfacing to a machine, a counter board, a DAC board and a DIO board were used. The result of the algorithm increased a machining precision and a machining speed in many short blocks.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.541-546
• /
• 2007

The combination of atom transfer radical polymerization (ATRP) and click chemistry was employed for the efficient preparation of well-defined block copolymers. Bromo terminated poly(methyl acrylate) (pMA-Br) was prepared by an ATRP initiator, ethyl-2-bromoisobutyrate (EBiB). Subsequently, the bromine chain end of pMA-Br was converted to an azide group by simple nucleophilic substitution reaction. ${\alpha}-Alkyn-{\omega}-bromo-functionalized$ polystyrene was also synthesized by ATRP using the alkyn-functionalized initiator, propargyl-2-bromoisobutyrate (PgBiB). In both cases, the conversion was limited to a low level to ensure a high degree of chain end functionality. Then the coupling reaction between the azide end group in $pMA-N_3$ and alkyn-functionalized PgBiB-pSt was performed by Cu(I)catalysis. This coupling reaction was monitored by gel permeation chromatography (GPC). The synthesized block copolymer was characterized by FT-IR, $^1H-NMR$ spectroscopy and $^1H-^1H$ COSY correlation spectroscopy.

• Structural Engineering and Mechanics
• /
• 제33권5호
• /
• pp.605-619
• /
• 2009

This paper presents the details of finite element (FE) modeling and analysis of an external prestressing technique to strengthen a prestressed concrete (PSC) end block. Various methods of external prestressing techniques have been discussed. In the proposed technique, transfer of external force is in shear mode on the end block creating a complex stress distribution. The proposed technique is useful when the ends of the PSC girders are not accessible. Finite element modeling issues have been outlined. Brief description about material nonlinearity including key aspects in modeling inelastic behaviour has been provided. Finite element (FE) modeling including material, loading has been explained in depth. FE analysis for linear and nonlinear static analysis has been conducted for varying external loadings. Various responses such as out-of-plane deformation and slip have been computed and compared with the corresponding experimental observations. From the study, it has been observed that the computed slope and slip of the steel bracket under external loading is in good agreement with the corresponding experimental observations.

• Computers and Concrete
• /
• 제6권1호
• /
• pp.41-57
• /
• 2009

This paper presents the details of a novel external prestressing technique for strengthening of concrete members. In the proposed technique, transfer of external force is in shear mode on the end block thus creating a complex stress distribution and the required transverse prestressing force is lesser compared to conventional techniques. Steel brackets are provided on either side of the end block for transferring external prestressing force and these are connected to the anchor blocks by expansion type anchor bolts. In order to validate the technique, an experimental investigation has been carried out on post-tensioned end blocks. Performance of the end blocks have been studied for design, cracking and ultimate loads. Slip and slope of steel bracket have been recorded at various stages during the experiment. Finite element analysis has been carried out by simulating the test conditions and the responses have been compared. From the analysis, it has been observed that the computed slope and slip of the steel bracket are in good agreement with the corresponding experimental observations. A simplified analytical model has been proposed to compute load-deformation of the loaded steel bracket with respect to the end block. Yield and ultimate loads have been arrived at based on force/moment equilibrium equations at critical sections. Deformation analysis has been carried out based on the assumption that the ratio of axial deformation to vertical deformation of anchor bolt would follow the same ratio at the corresponding forces such as yield and ultimate. It is observed that the computed forces, slip and slopes are in good agreement with the corresponding experimental observations.

• 한국전자파학회논문지
• /
• 제21권4호
• /
• pp.362-370
• /
• 2010

본 논문에서는 저온 동시 소성 세라믹(Low Temperature Co-fired Ceramic: LTCC) 기술을 이용하여 Wi-Fi와 WiMAX에 적용할 수 있는 무선 전단부(RF front-end) 모듈을 구현하였다. 무선 전단부 모듈은 3개의 LTCC 대역 통과 여파기와 FBAR 여파기, embedded된 정합 회로, Wi-Fi와 WiMAX 모드 선택용 SPDT 스위치, 송 수신택용 SPDT 스위치 그리고 대역 선택용 SP4T 스위치로 구성되어 있다. 모드 선택용 SPDT 스위치의 DC block 패시터를 실장하기 위한 패드 패턴에서 LTCC의 적층 구조의 특성으로 인해 0.2~0.3 pF의 값을 가지는 기생 성분이 생기게 된다. 이러한 기생 성분은 설계된 회로의 매칭을 틀어지게 만들어 결과적으로 모듈의 전기적 성능을 저하시킨다. 따라서 기생 커패시터 성분에 상응하는 칩 인덕터를 DC block 커패시터 패드 패턴과 병렬로 달아서 기생 성분을 상쇄하여 모듈의 특성을 최적화하였다. 제작된 무선 전단부 모듈은 내부 접지(inner GND) 3개 층을 포함한 12층으로 설계되었으며, 크기는 $6.0mm{\times}6.0mm{\times}0.728mm$이다.

• KIEAE Journal
• /
• 제4권3호
• /
• pp.65-70
• /
• 2004

The purpose of this study is to analysis the thermal performance of the clayed hollow block wall. Its thermal performance was evaluated comparison with the cement block wall, it was generally used in building envelope. To that end, we conducted a insulation performance experiment and heating and cooling load simulation for a respective wall. In addition, we calculated a construction cost for each other's wall. The results of this study can be summarized as follows. (1) According to experiment of a insulation performance, coefficient of overall heat transmission of the cement block wall and clayed hollow block wall was calculated respectively $2.72W/^2K$ and $1.42W/^2K$. (2) The annular load saving of the clayed hollow block wall was evaluated 1.5% larger than its of the cement block wall. (3) The construction cost of the clayed hollow block wall was calculated 73% more expensive than its of the cement block wall. (4) The construction cost of the clayed hollow block composite wall was calculated 13.7% more expensive than its of the cement block composite wall.

• 디지털산업정보학회논문지
• /
• 제14권2호
• /
• pp.11-17
• /
• 2018

IDS/IPS and networked computer systems are playing an increasingly important role in our society. They have been the targets of a malicious attacks that actually turn into intrusions. That is why computer security has become an important concern for network administrators. Recently, various Detection/Prevention System schemes have been proposed based on various technologies. However, the techniques, which have been applied in many systems is useful for existing intrusion patterns on standard-only systems. Therefore, probe detection of private clouds using BlockChain has become a major security protection technology to detection potential attacks. In addition, BlockChain and Probe detection need to take into account the relationship between the various factors. We should develop a new probe detection technology that uses BlockChain to fine new pattern detection probes in cloud service security in the end. In this paper, we propose a probe detection using Fuzzy Cognitive Map(FCM) and Self Adaptive Module(SAM) based on service security using BlockChain technology.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1435-1438
• /
• 2005

In hands-free telephone systems, the received speech signal is fed back to the microphone and constitutes the so-called echo. To cancel the effect of this time-varying echo path, it is necessary to device an adaptive filter between the receiving and the transmitting ends. For a typical FIR realization, the length of the fullband adaptive filter results in high computational complexity and low convergence rate. Consequently, subband adaptive filtering schemes have been proposed to improve the performance. In this work, we use deterministic approach to analyze the relationship between fullband and subband adaptive filtering structures. With block adaptive filtering structure as an intermediate stage, the analysis is divided into two parts. First, to avoid aliasing, it is found that the matrix of block adaptive filters is in the form of pseudocirculant, and the elements of this matrix are the polyphase components of the fullband adaptive filter. Second, to transmit the near-end voice signal faithfully, the analysis and the synthesis filter banks in the subband adaptive filtering structure must form a perfect reconstruction pair. Using polyphase representation, the relationship between the block and the subband adaptive filters is derived.

• 대한화학회지
• /
• 제24권3호
• /
• pp.259-265
• /
• 1980

자유라디칼 telomerization 반응을 이용하여 스티렌-메타크릴산메틸 block 혼성중합체 (PS-b-PMMA)를 합성하였다. AIBN을 개시제로 사용하여 CCI$_4$로 스티렌을 telomerization시킨 다음 생성된 중합체의 $CCI_3$ 말단기를 macrotelogen으로 사용하여 AIBN 개시에 의해 메타크릴산 메틸을 다시 telomerization하여 스티렌-메타크릴산메틸 block 혼성중합체를 얻었다. Macrotelogen의 농도, 단위체의 농도, macrotelogen의 분자량, 반응온도 및 용매의 농도가 block 혼성중합체생성에 미치는 영향을 조사하였다. 반응조건을 조절하여, PMMA가 약 10무게%까지 포함된 block 혼성중합체를 얻었다.

• 전기화학회지
• /
• 제18권2호
• /
• pp.75-80
• /
• 2015

방향족 친핵성 치환반응을 이용하여 멀티블록형 sulfonated poly(arylene ether sulfone)(SPAES) 공중합체를 합성하였다. 서로 다른 말단(F- 또는 OH-말단)을 가지는 친수성 및 소수성 올리고머를 합성한 후 이를 이용하여 고분자 전해질 막을 합성하였다. 각기 다른 말단이 블록공중합체의 분자량에 미치는 영향을 분석하였고, 서로 다른 친수성구조가 블록고분자의 특성에 어떠한 영향을 미치는지 분석하였다. 합성된 멀티블록고분자는 70%이상의 습도에서 나피온 막과 비슷하거나 우수한 이온전도도를 나타내었고, 특히 SPAES 9의 경우 전습도 영역에서 SPAES 10보다 높은 이온전도도를 보였는데, 이는 친수성 블록내의 술폰산기의 부분 농도가 높아짐에 따라 친수성-소수성 간의 상분리가 발달되어 이온전도도가 향상된 것으로 보인다.