• Food Science of Animal Resources
• /
• v.33 no.1
• /
• pp.89-95
• /
• 2013

This research was conducted to compare the meat characteristics of Korean native duck and imported commercial duck. The Korean native ducks and imported commercial ducks (broiler duck: Grimaud) were raised under identical rearing and feeding conditions for 8 wk and 6 wk, respectively. At the end of the rearing period, ten ducks from each group were slaughtered, and breast and leg meat were obtained 24 h after slaughtering for analyses of meat characteristics. The results showed that the breast of Korean native ducks contained lower moisture and fat, and higher protein and water holding capacity (WHC) than those of imported commercial ducks (p<0.05). The breast of Korean native ducks also had higher CIE $a^*$ and lower CIE $L^*$ (p<0.05). After cooking, the breast meat of Korean native ducks had higher shear-force, sensory attributes of texture, taste and overall likeness (p<0.05). Also, the breast meat of Korean native ducks contained a higher percentage of palmitic acid ($C_{16:0}$) and arachidonic acid ($C_{20:4}$) (p<0.05) than those of imported commercial ducks. Furthermore, the leg meat of Korean native ducks contained higher percentages of total unsaturated fatty acid and lower percentages of total saturated fatty acid (p<0.05). It is concluded that the meat from Korean native ducks, especially breast meat, had better quality parameters and contained higher amounts of unsaturated fatty acids.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.18-27
• /
• 2002

A hierarchical representation scheme for planar curves, MBO-tree, is proposed in this paper, which provides natural approximation and efficient localization. MBO-tree is based on the Douglas-Peucker algorithm (iterative end-point fit algorithm), but approximation errors that are stored with corresponding points in MBO-tree nodes and are used for abstraction measures are adjusted by force to eliminate unnatural approximation. The error adjusting is just making the approximation error of a node in a MBO-tree to be less than or equal to that of its parent. In point of localization, the bounding area of a curve is represented with a minimum bounding octangle (MBO), which can enclose the curve more compactly compared with those of other hierarchical schemes, such as the strip tree, the arc tree and the HAL tree. The MBO satisfies the hierarchical inclusion property that is useful for hierarchical geometrical operations, such as the point-inclusion test and the polygon intersection test. Through several experiments, we found that the proposed scheme was able to approximate more naturally and to localize more effectively.

• Structural Engineering and Mechanics
• /
• v.76 no.3
• /
• pp.279-291
• /
• 2020

The seismic design of conventional frame structures is meant to enhance plastic deformations at beam ends and prevent yielding in columns. To this end, columns are made stronger than beams. Yet yielding in columns cannot be avoided with the column-to-beam strength ratios (about 1.3) prescribed by seismic codes. Preventing plastic deformations in columns calls for ratios close to 4, which is not feasible for economic reasons. Furthermore, material properties and the rearrangement of geometric shapes inevitably make the distribution of damage among stories uneven. Damage in the i-th story can be characterized as the accumulated plastic strain energy (W_pi) normalized by the product of the story shear force (Q_yi) and drift (δ_yi) at yielding. Past studies showed that the distribution of the plastic strain energy dissipation demand, W_pi/ΣW_pj, can be evaluated from the deviation of Q_yi with respect to an "optimum value" that would make the ratio W_pi/(Q_yiδ_yi) -i.e. the damage- equal in all stories. This paper investigates how the soil type and ductility demand affect the optimum lateral strength distribution. New optimum lateral strength distributions are put forth and compared with others proposed in the literature.

• Cross-Cultural Studies
• /
• v.26
• /
• pp.445-463
• /
• 2012

Beltenebros is Antonio Mu?oz Molina's third novel. Its plot originates in a criminal act. Darman, the main character, arrives in Madrid to kill a traitor of the undercover organization to which he himself belongs. Treason is paid with death and Darman is in charge of the executions. The intricate story of espionage and intrigue is absorbing. Unlike other novels of the genre, in Beltenebros we can witness a unique psychological development of the main character. In his fiftieth anniversary, Darman becomes conscious of the painful and devastating effects of his criminal acts on the lives of the people he has crossed paths with. Then, for the first time, he acts like a Romanesque heroe by killing Valdivia-Ugarte, a deceitful mole who has been manipulating the strings of the plot to his own benefit. The story unfolds along an almost uniform progression of chronological time, only interrupted by random memories of a past that twenty years ago destroyed Walter's life, and in which Darman and the rest of the characters are all implicated. Few references to the Spanish Civil War inserted in the discourse are, however, of paramount importance as the depiction of a historical trauma, as a triggering force for the episodes of the novel, or as justification to Darman'scrimes as well as those of the clandestine Comunist Party. Indeed they were the victims of the conflict and the winners inflicted upon them hatred, repression, treason and disloyalty. As in other Mu?oz Molina's novels, the literary space, in this case Madrid, propels the development of the plot, and plays a protagonist role only equal to that of the main characters. It is in Madrid where Darman lives until he becomes prisoner of the enemy army, or where the symmetrical deaths of Walter and Andrade take place. Other spaces inhabit Madrid: the Universal Cinema, symbolic territory of the secret and hidden, where the story, as well as the relationships of the characters start and end the warehouse; or the Bo?te Tab? the nightclub that frequents Valdivia-Ugarte through secret passages connected with the Universal Cinema.

• Journal of Korean Philosophical Society
• /
• v.144
• /
• pp.257-283
• /
• 2017

The purpose of this paper is primarily to examine models of collective decision-formation and decision-making. The goal is to propose a model of decision-formation and decision-making that is appropriate for a democratic society. Habermas distinguishes these models of decision-formation and decision-making by liberal, republican, and deliberative political models according to their justification types. Axel Honneth, on the other hand, is divided into three models of liberalism, proceduralism, and republicanism. I want to divide the model of possible decision-making in democratic society into three, that is, the model based on force, the model based on procedure, and the republican model. This distinction will identify the characteristics of each decision-making model and this confirmation will help us find the best decision-making model for a democratic society. In the end, I will combine the republican model with the procedural model. For this synthesis, I will also propose three conditions in modern society. I will argue that the three conditions of collective intelligence, active freedom, and horizontal networks are necessary.

• Journal of The Korean Association of Information Education
• /
• v.23 no.5
• /
• pp.461-467
• /
• 2019

As the convergence solutions become more common, the use of Arduino and Raspberry Pi boards has been increasing. These control boards has to be executed under power blackout. In this environment, we take advantage of solar power system to overcome the power out. In this paper, we poposed a effficient power control strategy. Our experimental device is a DSLR shooting device executed based a predesigned interval time. The control module of our experimental device is the compound system of Raspberry Pi and Arduino boards. Arduino board send the force signals to wake up Raspberry Pi. We developed a new control strategy algorithm for the efficient use of solar power energy. In this paper, we mesured the efficiency of solar enery consuming of our system. We programmed a control system to send DSLR shooting signals. In experimentals, we ensured a stable consuming of electricity during 10 days. In the end, it was found that the consumption power of the Raspberry was reduced by about 81% when the Aduino was combined to save power.

• Journal of Yeungnam Medical Science
• /
• v.38 no.4
• /
• pp.289-307
• /
• 2021

Avulsion injuries result from the application of a tensile force to a musculoskeletal unit or ligament. Although injuries tend to occur more commonly in skeletally immature populations due to the weakness of their apophysis, adults may also be subject to avulsion fractures, particularly those with osteoporotic bones. The most common sites of avulsion injuries in adolescents and children are apophyses of the pelvis and knee. In adults, avulsion injuries commonly occur within the tendon due to underlying degeneration or tendinosis. However, any location can be involved in avulsion injuries. Radiography is the first imaging modality to diagnose avulsion injury, although advanced imaging modalities are occasionally required to identify subtle lesions or to fully delineate the extent of the injury. Ultrasonography has a high spatial resolution with a dynamic assessment potential and allows the comparison of a bone avulsion with the opposite side. Computed tomography is more sensitive for depicting a tiny osseous fragment located adjacent to the expected attachment site of a ligament, tendon, or capsule. Moreover, magnetic resonance imaging is the best imaging modality for the evaluation of soft tissue abnormalities, especially the affected muscles, tendons, and ligaments. Acute avulsion injuries usually manifest as avulsed bone fragments. In contrast, chronic injuries can easily mimic other disease processes, such as infections or neoplasms. Therefore, recognizing the vulnerable sites and characteristic imaging features of avulsion fractures would be helpful in ensuring accurate diagnosis and appropriate patient management. To this end, familiarity with musculoskeletal anatomy and mechanism of injury is necessary.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.9
• /
• pp.1254-1262
• /
• 2021

Recently, the agricultural environment in Korea is rapidly changing due to the aging and decline of the agricultural population, and in order to solve these problems, it is urgently required to improve the agricultural productivity and reduce the labor force. To solve this problem, a smart farm fused with ICT technology is being proposed as an alternative. In Korea, smart farms are currently mainly used in greenhouses. In this paper, this smart farm technology is to be applied to the cultivation of sprouted ginseng. To this end, we use seedlings (about 1.0g) to grow a solid medium and bed for cultivating sprouted ginseng, a fresh ginseng that is produced in a short period of time (2~3 months) with a clean environment management technology that does not use chemical pesticides and hydroponics in a greenhouse developed. In addition, an IoT-based growth environment management system was developed to monitor the growth process of sprouted ginseng in such an environment and to control driving devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.27-31
• /
• 2019

Various safety accidents occur frequently at construction sites due to poor operation of construction machines and insufficient safety facilities. Among them, safety accidents on the Tawerkrain have resulted in massive casualties and property damage. Therefore, the purpose of this study is to develop safety devices to prevent safety accidents in the Tower Crane. To this end, the existing safety device was explored and the model of the Tower Crane was constructed using Arduino. The weight of the object, the weight of the pendulum, and the distance from the center axis, as well as the equation of turning and experimentation, suggested mobile weights as a safety device to identify and resolve problems with existing safety devices. This is expected to minimize the limit on the salvage distance of the tower crane, thus providing a safer working environment away from the risk of a safety accident.

• International Journal of Clinical Preventive Dentistry
• /
• v.14 no.4
• /
• pp.228-234
• /
• 2018

Objective: The authors have experimented for the artificial plaque removal effect of several kinds of 360 degree rotating head typed tooth-brushes with sonic vibratory actioned by using of automatic machine for horizontal scrub method in order to find the better toothbrush type for plaque removal. Methods: The experiment was conducted on three medium to 360 degree rotating head toothbrushes, a medium sized toothbrush and a medium sized toothbrush, and a flat toothbrush consisting of 30 ordinary toothbrushes. A brushing machine with horizontal scrubbing was manufactured and had variations of the end of the bristle attached to or near the surface of the teeth, a vibrating wave action force of 16,000 or 18,000 cycles per minute, and a working time of 2 or 3 minutes. The tooth removal effect was confirmed by scanning and analyzing images with a computer program after automatic brushing with the machine. The elimination rate results for each group were analyzed using the independent t-test and one-way ANOVA test. Results: It revealed the most in removal effect for the artificial plaque in such conditions as action at near the tooth surface with 18,000 cycle for 3 minutes in case of using A, B, and C tooth-brush. And it has more removal effect rate than for using the plane tooth-brush (p<0.05). Conclusion: It was recommended to develop the 360 degree rotating head and vibratory toothbrush focusing to use near the tooth surface with 18,000 cycles of vibration for 3 minutes at one site of the teeth area.