• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.233-239
• /
• 2000

Investigation results are presented fur the shaft end displacements due to the elastic deformation of the casing and support in double suction centrifugal pump. Suction and discharge nozzles of the pump are subject to external piping loads and, in API 610, maximum values of their components are specified. This means that each nozzle can be subject to various combinations of loading conditions. Considering upper and lower criteria of each load, we must perform for the 4,096 load cases, and assign the direction and range of the loads. So, this paper develops an efficient procedure(Compliance Coefficient Method) to calculate the shaft end displacements(＠ coupling) to determine whether satisfying the pump's standard. Also, we analyzed the effects of the casing and support thickness on shaft end displacements.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.373-377
• /
• 2002

In the end milling operation the deflection of the cutter is an important factor affecting the accuracy of machining with implications on the selection of cutting parameters and economics of the operation. The deflection of the end mill was studied both experimentally with strain gauge, tool dynamometer, laser measuring apparatus and on a finite element model of the cutting using ANSYS software. The deflection of machining tool with various helix angles was studied with FEM simulation and experiment. ANSYS analysis performed on the finite element model of the end mill provides deflection results which agree within 15.0% with the experimental ones.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.947-950
• /
• 2000

The purpose of this paper is to investigate the effect of the helix angle of endmilling cutter on the cutting characteristics of inconel 718 in up endmilling. To this end cutters with helix angle of $20^\circ$, $30^\circ$, $40^\circ$ and $50^\circ$ degree have been prepared. And a modified cutting force model in up end milling process is presented. Using this cutting force components of 4-tooth endmills with various helix angles have been predicted. Predicted values of cutting force components are well coincide with the measured ones. As helix angle increases overlapping effects of the active cutting edges increase.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.569-575
• /
• 2014

In this study, the effect of cutting edge geometry, such as helix and rake angles, on surface roughness in ball-end milling is investigated by using the Taguchi method. A set of experiments adopting the $L_{27}(3^{13})$ design with an orthogonal array are conducted with special WC ball-end mills having different helix and rake angles. Analysis of variance (ANOVA) is performed to analyze the effects of tool geometry and machining parameters, such as cutting speed, feed per tooth, and depth of cut, on surface roughness. The ANOVA results reveal that helix and rake angles are critical factors affecting surface roughness; the interaction of helix angle and cutting speed is also important. This research can contribute to novel cutting edge designs of ball-end mills and optimization of cutting parameters.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.121-127
• /
• 2012

An electric power compensation system for a DC transmission system with an integrated wind turbine generator is proposed. The proposed compensation system consists of a synchronous generator and a duplex reactor. This apparatus is connected to the sending-end circuit of the DC transmission system. A set of steady-state equations of the system is first derived. Then, the effect of the duplex reactor, which can eliminate the sending-end grid current distortion due to commutation of the converter, is explored. The relationships among power at the sending-end circuit are also revealed. It is shown that fluctuations in the sending-end grid power due to changes in wind velocities are compensated with the proposed system. Finally, the effects of the sending-end grid conditions on the steady-state characteristics of the system are studied.

• 대한간호학회지
• /
• 제48권5호
• /
• pp.578-587
• /
• 2018

Purpose: This study aimed to understand the mechanisms of decision regret and stress of family surrogates' end-of-life decision making using an exploratory path model. In particular, the research identified the direct effects of perceptions of uncertainty and effective decisions on decision regret and stress, and examined the indirect effects of being informed, having clear values, and being supported for decision regret and the stress of end-of-life decision making through the mediating variables of perceptions of uncertainty and effective decisions. Methods: Data were collected from 102 family surrogates who had participated in end-of-life decision making for patients with terminal cancer in a tertiary hospital. Results: Perception of effective decisions was a significant direct predictor of decision regret, and uncertainty was a significant predictor of stress among the participants. Being informed, having clear values, and being supported had a significant indirect influence on decision regret through the perception of effective decisions among family surrogates. However, only having clear values had a significant indirect influence on stress through the perception of uncertainty. The model explained 63.0% of decision regret and 20.0% of stress among the participants and showed a good fit with the data, ${\chi}^2=12.40$ (df=8, p=.134), TLI=.97, and RMSEA=.07. Conclusion: Nurses can support family surrogates in end-of-life decision-making processes to decrease their decision regret by providing information about end-of-life care choices, clarifying personal values, and supporting the decision-making process, and to relieve their stress by facilitating the clarification of personal values.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.75-83
• /
• 2001

In this paper, numerical analysis is used to find the effects of inclination of rear end on flow characteristic around an automobile. The reference slant angle of rear end is 28.6$^{\circ}$, the slant angle of rear end is decreased to 24$^{\circ}$, 26.6$^{\circ}$ and also increased to 31.6$^{\circ}$, 36.4$^{\circ}$. The 3-D incompressible Navier-Stockes equations are solved by the iterative time marching scheme. The computed surface pressure coefficients were compared with experimental results and a good agreement has been achieved. The A- and C-pillar vortex and other flow phenomena around the ground vehicle are evidently shown. The variation of aerodynamic coefficients of drag, lift with respect to inclination angle of rear end are systematically studied. The flow characteristic on the automobile surface with respect to change of inclination of rear end have been also studied.

• 한국가스학회지
• /
• 제19권1호
• /
• pp.18-22
• /
• 2015

본 연구는 LPG 강재용기에서 상단반구와 하단반구의 코너반경이 응력강도 안전성에 미치는 영향을 FEM으로 해석한 것이다. FEM 해석결과에 의하면, 응력강도 안전성에 큰 영향을 미치는 요소는 용기의 두께보다 상단반구 및 하단반구의 코너반경이다. 그러나 강재용기의 두께는 경량화에 직결되기 때문에 간과해서는 안 되는 중요한 설계요소이다. LPG 강재용기의 강도안전성 검사에서 최고시험압력이 3.04MPa임을 감안할 때, 20kg용 LPG 강재용기의 두께는 2.3~2.6mm, 상단반구와 하단반구의 코너반경은 157mm 이상으로 최적화 설계하는 것이 바람직함을 알 수 있다.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.342-350
• /
• 2014

An active stimulating device, such as a fluttering net or canvas attached to the end of a cod end generating a shaking motion, could help to encourage the escape of juvenile fish positioned passively near the net. Field fishing trials using a shrimp beam trawl were carried out to examine the effect on the reduction of juvenile fish or other discard catch by generating a shaking movement of the cod end using an unbiased cap-like round canvas. The mean period of the shaking motion with the round canvas was ~14 s, and the mean amplitude was 0.4 m as measured by peak event analysis and the global wavelet method. The bycatch of juvenile fish in 14 trials decreased by ~30% and by ~25% using a steady cod end for the total bycatch using a shaking cod end in the shrimp beam trawl, while the marketing catch was similar between steady and shaking cod ends. There was no difference in the body size of the shrimp or fish and species composition between the steady and shaking cod ends. Above results demonstrate a new method for bycatch reduction using an active stimulating device, although more detailed studies are needed.

• 한국응용과학기술학회지
• /
• 제38권3호
• /
• pp.669-679
• /
• 2021

본 연구의 목적은 END 금연동기유발 프로그램이 흡연 고등학생의 일산화탄소, 금연자기효능감, 흡연일수, 1일 흡연량에 미치는 효과를 확인하기 위해 실시한 비동등성 대조군 전·후 시차설계를 이용한 유사 실험연구이다. 대상자는 C시에 소재한 고등학생으로 금연에 관심이 있는 흡연학생으로 실험군 27명, 대조군 28명 총 55명이었으며 자료수집은 2018년 7월 12일부터 10월 4일까지였다. 대상자에게 중재한 프로그램은 END 금연동기유발 프로그램으로 주 1회 50분, 총 6주간이었다. 중재결과 실험군은 대조군에 비해 금연 자기효능감(z=110.00, p<.001), 흡연일수(z=640.00, p<.001), 1일 흡연량(z=520.50, p<.016)이 지지되었다. 따라서 END 금연동기유발 프로그램은 학교 현장에서 흡연 고등학생의 흡연율을 낮추고 금연동기를 유발하여 금연을 유도하기 위한 중재로 본 프로그램의 적용을 제안한다.