• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.169-172
• /
• 2000

This paper describes design of cryptographic processor which can execute SEED, DES, and triple DES encryption algorithm. To satisfy flexible architecture and area-efficient structure, the processor has I unrolled loop structure with hardware sharing and can support four standard mode, such as ECB, CBC, CFB, and OFB modes. To reduce overhead of key computation, the precomputation technique is used. Also to eliminate increase of processing time due to data input and output time, background I/O technique is used which data input and output operation execute in parallel with encryption operation of cryptographic processor. The cryptographic processor is designed using 2.5V 0.25 $\mu\textrm{m}$ CMOS technology and consists of about 34.8K gates. Its peak performances is about 250 Mbps under 100 Mhz ECB SEED mode and 125 Mbps under 100 Mhz triple DES mode.

• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.107-112
• /
• 2015

HIGHT is an 64-bit block cipher, which is suitable for low power and ultra-light implementation that are used in the network that needs the consideration of security aspects. This paper presents a parallel key scheduler that generates the whitening keys and subkeys simultaneously for both encryption and decryption processes. We construct the reverse LFSR and key generation blocks to generate the keys for decryption process. Then, the new key scheduler is made by sharing the common logics for encryption and decryption processes to minimize the increase in hardware complexity. From the simulation results, the logic size is increased 1.31 times compared to the conventional HIGHT. However, the performance of HIGHT including the proposed key scheduler can be increased by two times compared to the conventional counterpart.

• ETRI Journal
• /
• v.43 no.6
• /
• pp.1113-1129
• /
• 2021

Lightweight ciphers are increasingly employed in cryptography because of the high demand for secure data transmission in wireless sensor network, embedded devices, and Internet of Things. The PRESENT algorithm as an ultralightweight block cipher provides better solution for secure hardware cryptography with low power consumption and minimum resource. This study generates the key using key rotation and substitution method, which contains key rotation, key switching, and binary-coded decimal-based key generation used in image encryption. The key rotation and substitution-based PRESENT architecture is proposed to increase security level for data stream and randomness in cipher through providing high resistance to attacks. Lookup table is used to design the key scheduling module, thus reducing the area of architecture. Field-programmable gate array (FPGA) performances are evaluated for the proposed and conventional methods. In Virtex 6 device, the proposed key rotation and substitution PRESENT architecture occupied 72 lookup tables, 65 flip flops, and 35 slices which are comparably less to the existing architecture.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.8 no.4
• /
• pp.21-32
• /
• 1998

통신 및 컴퓨터 시스템의 처리 속도가 높아짐에 따라 정보 보호를 위해서 고속의 데이터처리가 반드시 요구되어진다. 따라서 본 논문에서는 국제 표준 암호알로기즘의 하나인ISDEA(International Data Encryption Algorithm)를 고속 연산을 위하여 알고리즘을 분석하고 암호화 수행시간을 감소하기 위하여 파이프라인 처리를 하며, 서브키 생성시의 연산회수를 줄이기 위하여 서브키 블록을 EEPROM 으로 구현하였다. 전체적인 시스템은 VHDL(VHSIC Hardware Description Language)을 사용하여 설계하였다. IDEA 알고리듬은 EDA tool인 Synopsys를 사용하여 Sunthesis하였으며, Xilinx의 FPGA XC4052XL을 이용하여 One CHip화 시켰다. 입력 클럭으로 20Mhz를 사용하였을 때, data arrival time은 687.07ns였으며, 109.01 Mbp의 속도로 동작하 였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1147-1152
• /
• 2012

In this paper, it is key issue about analysis of characteristics processing of digital random output stream of hardware random number generator, which is applied in medical area. The output stream of random number generator based on hardware binary random number is effected from factors such as delay, jitter, temperature, and so on. In this paper, it presents about major factor, which effects hardware output random number stream, and the randomness of output stream data, which are combined output stream and postprocessing data such as encryption algorithm, encoding algorithm, is analyzed. the analyzed results are evaluated by major test items of randomness.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.229-231
• /
• 2021

In this paper, we describe a hardware design of the SIMECK block cipher algorithm that can be implemented in lightweight hardware with appropriate security strength. To achieve fast encryption and decryption operations, it was designed using two-step method that reduces the number of operation rounds. The designed SIMECK cryptographic core was implemented in Arty S7-50 FPGA device and its hardware operation was verified with a GUI using Python.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.611-620
• /
• 2011

Since card-type one-time password (OTP) generators became available, power and area consumption has been one of the main issues of hardware OTPs. Because relatively smaller batteries and smaller chip areas are available for this type of OTP compared to existing token-type OTPs, it is necessary to implement power-efficient and compact dedicated OTP hardware modules. In this paper, we design and implement a low-power small-area hardware OTP generator based on the Advanced Encryption Standard (AES). First, we implement a prototype AES hardware module using a 350 nm process to verify the effectiveness of our optimization techniques for the SubBytes transform and data storage. Next, we apply the optimized AES to a real-world OTP hardware module which is implemented using a 180 nm process. Our experimental results show the power consumption of our OTP module using the new AES implementation is only 49.4% and 15.0% of those of an HOTP and software-based OTP, respectively.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.2
• /
• pp.65-73
• /
• 2008

Security layer of the Cdma2000 1x EV-DO is currently completing standard (C.S0024-A v2.0). Accordingly, a hardware security devices, that allows to implementation requirement of the security layer described in standard document, is required to apply security function about data transferred between AT and AN of then Cdma2000 1x EV-DO environment. This paper represents design of hardware device providing EV-DO security with simulation of the security layer protocol via the FPGA platform. The SHA-1 hash algorithm for certification and service of packet data, and the AES, SEED, ARIA algorithms for data encryption are equip in this device. And paper represents implementation of hardware that applies optionally certification and encryption function after executing key-switch using key-switching algorithm.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.134-141
• /
• 2020

Telemetry system is a communication system that measures and transmits various signals in the aircraft to the ground for collecting and monitoring flight data during the development of unmanned air vehicle and satellite launch vehicles. With the recent development of wireless communication technology, it is becoming important to apply encryption of telemetry system to prepare with security threats that may occur during flight data transmission. In this paper, we suggested and implemented the application method of ARIA-256, Korean standard encryption algorithm, to apply encryption to telemetry system. In consideration of the block error propagation and the telemetry frame characteristics, frame is encrypted using the CTR mode and can apply the Reed-solomon codes recommended by CCSDS. ARIA algorithm and cipher frame are implemented in FPGA, and simulation and hardware verification system confirmed continuous frames encryption.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.9
• /
• pp.225-230
• /
• 2019

Recently, with the development of Internet technology, various encryption algorithms have been adopted to protect the sensing data measured by hardware devices. The Advanced Encryption Standard (AES), the most widely used encryption algorithm in the world, is also used in many devices with strong security. However, it has been found that the AES algorithm is vulnerable to side channel analysis attacks such as Differential Power Analysis (DPA) and Correlation Power Analysis (CPA). In this paper, we present a software optimization implementation technique of the AES algorithm applying the most widely known masking technique among side channel analysis attack methods.