• Korean Journal of Child Studies
• /
• v.23 no.5
• /
• pp.1-17
• /
• 2002

The influence on children's analogical problem solving of structural highlighting during encoding and retrieval of sources was studied with 379 9-year-old participants. Performance on the first 2 of 4 tests determined the analogical level of each child. For the remaining 2 tests, the child was assigned to 1 of 12 different structural highlighting conditions, including 4 encoding conditions (reading, line, self-line, and self-explain) and 3 retrieval conditions (reminding, cued, and thematic comparison). Results showed that retrieval conditions, not encoding conditions, improved the analogical ability of the child. Children initially low in analogical ability improved in cued retrieval conditions; children initially high in analogical ability improved both in thematically compared and in cued retrieval conditions. Practical implications of the results were discussed.

• Journal of Plant Biotechnology
• /
• v.43 no.2
• /
• pp.231-239
• /
• 2016

To study the transcript levels of epigenetically regulated genes in tobacco, we have developed a transgenic line OX1 overexpressing NtROS2a gene encoding cytosine DNA demethylation and a RNAi plant line RNAi13. It has been reported that salt- and $H_2O_2$-stress tolerance of these transgenic lines are enhanced with various phenotypic characters (Lee et al. 2015). In this paper, we conducted microarray analysis with Agilent Tobacco 4 x 44K oligo chip by using overexpression line OX1, RNAi plant line RNAi 13, and wild type plant WT. Differentially expressed genes (DEGs) related to metabolism, nutrient supply, and various stressed were up-regulated by approximately 1.5- to 80- fold. DEGs related to co-enzymes, metabolism, and methylation functional genes were down-regulated by approximately 0.03- to 0.7- fold. qRT-PCR analysis showed that the transcript levels of several candidate genes in OX1 and RNAi lines were significantly (p < 0.05) higher than those in WT, such as genes encoding KH domain-containing protein, MADS-box protein, and Zinc phosphodiesterase ELAC protein. On the other hand, several genes such as those encoding pentatricopeptide (PPR) repeat-containing protein, histone deacetylase HDAC3 protein, and protein kinase were decreased by approximately 0.4- to 1.0- fold. This study showed that NtROS2a gene encoding DNA glycosylase related to demethylation could regulate adaptive response of tobacco at transcriptional level.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1382-1397
• /
• 1991

The QM-Coder based on the recommandation of the JBIG committee has been studied for applying it to G3 FAX. In the point of view of implementation. the QM-Coder is modified to have following properties : 1) initialized at each start of the new line for protecting the error propagation, 2) pixel context for error estimation, fill bit insertion to meet minimum scan line time of 10 msec. and it is found that the modified QM-Coder is useful for encoding half tone images for low end G3 FAX machine, For higher compression ration than QM-Coder in encoding of the image binarized by ordered orther thchniques, a rearranging process before applying the QM-Coder is used and the resultant compression ratic was increased 1.13∼1.31 times than that of the conventional QM-Coder.

• Journal of Digital Contents Society
• /
• v.7 no.3
• /
• pp.169-174
• /
• 2006

In recent years, RFID is widely used in industrial applications including factory, material flow, logistics and defense areas. In this paper, The convolutional encoding and viterbi decoding is also implemented to improve the system performance. in an FPGA chip. The used convolution code is constraint length K=3 and rate R=1/2. The length of command frame and response frame is total of 48bits consisting of SOF 8 bits, command 16 bits, CRC 16 bit, and EOF 8 bits. And also the frame error rates are measured under the channel of line-of-sight and non line-of-sight, respectively. The performances are analyzed with FSK modulation only and FSK modulation added with convolutional encoding. These two measured results are compared with that of a RFID system with ASK modulation.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2339-2345
• /
• 2020

Radiation imaging systems consisting of a large number of channels greatly benefit from multiplexing methods to reduce the number of channels with minimizing the system complexity and development cost. In conventional pixelated radiation detector modules, such as anger logic, is used to reduce a large number of channels that transmit signals to a data acquisition system. However, these methods have limitations of electrical noise and distortion at the detector edge. To solve these problems, a multiplexing concept using a digital signal encoding technique based on a time delay method for signals from detectors was developed in this study. The digital encoding multiplexing (DEM) method was developed based on the time-over-threshold (ToT) method to provide more information including the activation time, position, and energy in one-bit line. This is the major advantage of the DEM method as compared with the traditional ToT method providing only energy information. The energy was measured and calibrated by the ToT method. The energy resolution and coincidence time resolution were observed as 16% and 2.4 ns, respectively, with DEM. The position was successfully distributed on each channel. This study demonstrated the feasibility that DEM was useful to reduce the number of detector channels.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.29-37
• /
• 2015

In this paper, we propose a robust pre-processing module for camera-based Optical Music Score Recognition (OMR) on mobile device. The captured images likely suffer for recognition from many distortions such as illumination, blur, low resolution, etc. Especially, the complex background music sheets recognition are difficult. Through any symbol recognition system, the staff line height and staff line space are used many times and have a big impact on recognition module. A robust and accurate staff line height and staff line space are essential. Some staff line height and staff line space are proposed for binary image. But in case of complex background music sheet image, the binarization results from common binarization algorithm are not satisfactory. It can cause incorrect staff line height and staff line space estimation. We propose a robust staff line height and staff line space estimation by using run-length encoding technique on edge image. Proposed method is composed of two steps, first step, we conducted the staff line height and staff line space estimation based on edge image using by Sobel operator on image blocks. Each column of edge image is encoded by run-length encoding algorithm Second step, we detect the staff line using by Stable Path algorithm and removal the staff line using by adaptive Line Track Height algorithm which is to track the staff lines positions. The result has shown that robust and accurate estimation is possible even in complex background cases.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.5
• /
• pp.443-450
• /
• 2013

This paper propose a new ROM data encoding method that takes into account of a sequential access pattern to reduce the power consumption in ROMs used in applications such as FIR filters that access the ROM sequentially. In the proposed encoding method, the number of 1's, of which the increment leads to the increase of the power consumption, is reduced by applying an exclusive-or (XOR) operation to a bit pair composed of two consecutive bits in a bit line. The encoded data can be decoded by using XOR gates and D flip-flops, which are usually used in digital systems for synchronization and glitch suppression. By applying the proposed encoding method to coefficient ROMs of FIR filters designed by using various design methods, we can achieve average reduction of 43.7% over the unencoded original data in the power consumption, which is larger reduction than those achieved by previous methods.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.359-362
• /
• 2002

In this paper, we propose a new feature-based text watermarking for the binary text image. The structure of specific characters from preprocessed text image are modified to embed watermark. Watermark message are embedded and detected by the following method; Hole line disconnect using the connectivity of the character containing a hole, Center line shift using the hole area and Differential encoding using difference of flippable score points. Experimental results show that the proposed method is robust to rotation and scaling distortion.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.302-307
• /
• 1999

Hamlet (PI549276) possessing 2RL was obtained by cross between a wheat cultivar ND7532 (Froid/Centurk) and a rye cultivar Chaupon. Chaupon was known to have resistant gene to biotype L of Hessian fly [Mayetiola destructor (Say)] larvae. The wheat-rye translocation line (Coker797*4/Hamlet) was also known to be resistant to biotype L of Hessian fly larvae. We analysed a set of 96 ESTs from the wheat-rye translocation line (2BS/2RL). ESTs were classified by various physiological processings, such as primary metabolism, secondary metabolism, transcription, translation, transport, signal transduction, defense, transposable element, and others. Three sequences encoding thioredoxin peroxidase, 26S rRNA, and rubisco small subunits were homologous to registered genes in rye. Although limited number of clones were used to develop ESTs, these clones and their sequence information may be useful for researchers studying general physiology and molecular biology on the translocation line.

• IE interfaces
• /
• v.12 no.1
• /
• pp.132-142
• /
• 1999

Two-sided (left- and right-sided) assembly lines in practice can provide several advantages over one-sided lines in terms of the required line length, throughput time, cost of tools and fixtures, and so on. This paper considers two-sided assembly line balancing with the objective of minimizing line length. The balancing problem is more complicated than that of one-sided lines due to sequence-dependency of tasks assigned to a pair of directly facing workstations. This paper shows how genetic algorithm can be used to solve two-sided assembly line balancing. For this, an encoding and a decoding method suitable to the problem are presented. Proper genetic operators and an evalutation function are also employed. Extensive computational experiments are carried out to show the efficacy of the proposed algorithm. The results show that the algorithm is viable and promising in solution quality and computation time.