• 치위생과학회지
• /
• 제19권4호
• /
• pp.261-270
• /
• 2019

Background: In this study, four types of effervescent vitamins marketed in Korea were analyzed for their acidity and vitamin content. For this purpose, bovine teeth were immersed in vitamin, and surface microhardness and appearance were measured before and after immersion to evaluate tooth demineralization and erosion. Methods: Bovine permanent incisors with sound surface enamel were cut to 5×5 mm size, embedded in acrylic resin, and polished using a polishing machine with Sic-paper. The prepared samples were analyzed for pH, vitamin content, and surface hardness before and after immersion using a surface microhardness meter. Demineralization of surface dental enamel was observed using a scanning electron microscope. Results: The average pH of the four effervescent vitamins was less than 5.5; the pH of the positive control Oronamin C was the lowest at 2.76, while that of the negative control Samdasoo was the highest at 6.86. The vitamin content was highest in Berocca and lowest in the DM company Multivitamin. On surface microhardness analysis, surface hardness values of all enamel samples were found to be decreased significantly after 1 and 10 minutes of immersion (p<0.05). After 10 minutes of immersion, there was a significant difference in the decrease in hardness between the experimental groups (p<0.05). Scanning electron microscopy observation showed that dental enamel demineralization after 10 minutes of immersion was the most severe in Oronamin C except for Samdasoo, followed by DM company Multivitamin and VitaHEIM. Immersion in BeroNew and Berocca resulted in similar effects. Conclusion: There is a risk of tooth erosion due to decreased tooth surface microhardness when using the four types of effervescent vitamins and vitamin carbonated beverages with pH below 5.5. Therefore, high pH vitamin supplements are recommended to prevent tooth erosion.

• 대한소아치과학회지
• /
• 제39권2호
• /
• pp.129-138
• /
• 2012

본 연구의 목적은 법랑질 표면 미세경도의 측정과 주사전자현미경 관찰을 통해 본 교실에서 개발한 2.26%의 불소를 함유한 폴리비닐알코올 테잎 (F-PVA tape)의 법랑질 탈회 억제 효과를 평가하기 위한 것이다. 60개의 법랑질 표본을 각 군당 15개 씩, 임의로 대조군, F-PVA tape 군, 불소바니쉬 군, CPP-ACFP 군으로 나누고, 각각의 재광화 제재를 도포한 후 pH-cycling 과정 거쳤다. 표본의 표면 미세경도를 측정하고 표면 미세경도 소실량을 계산하였다. 주사전자현미경 관찰을 위해, 각 군에서 5개의 표본을 추출하고 형태학적 특징을 분석하였고 다음과 같은 결론을 얻었다. 1. pH-cycling 후, F-PVA tape 군과 불소바니쉬 군의 법랑질 표면 미세경도 값은 CPP-ACFP 군과 비교 시 유의하게 높았으며, F-PVA tape 군과 불소바니쉬 군 사이에는 유의한 차이가 없었다. 2. 주사전자현미경 관찰 시, F-PVA tape 군과 불소바니쉬 군에서는 법랑질 표면에 형성된 수많은 구형 및 난원형의 결정 입자들이 관찰되었으며, 결정 입자의 밀도는 대조군 및 CPP-ACFP 군에서 보다 높았다. F-PVA tape은 법랑질의 탈회를 억제하는데 효과적이며, 그 효과는 불소바니쉬와 견줄만하고, CPP-ACFP 보다 우수하다.

• 대한치과교정학회지
• /
• 제5권1호
• /
• pp.21-24
• /
• 1975

The purpose of this study was to investigate the effect of sinc phosphate cement on the enamel surface of extracted teeth. The tooth was placed in a test tube, which was subjected to 5ml of 0.2M acetate buffer at pH 4 by 'window technique.' The calcium content of the acetate buffer was determined by the Perkin-Elmer Model 303 Atomic Absorption Spectrophotometer. The obtained results were summarized in the following. 1. The solubility of enamel is $0.92mg/cm^2$. ml in control group. 2. The solubility of enamel is increased by treating these with zinc phosphate cements. 3. The solubility of enamel is $0.69mg/cm^2$. ml by treating with Lee Smith cement. 4. The solubility of enamel is $0.30mg/cm^2$. ml by treating with G-C's cement.

• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.438-445
• /
• 2000

The ideal restorative material should mimic the properties of the tissues it replaces. Dental composite resins have been used widely as restorative materials due to its advantages such as excellent esthetics and ease of manipulation. But inadequate wear resistance has been a major factor limiting the use of composite restorative materials. Improved manufacturing techniques have allowed the development of hybrid composites, with a greater percentage volume filler loading, which have improved physical and mechanical properties. However they are lacking in the study of wear resistance. The purpose of this study was to evaluate the wear of human enamel against ceromer by the use of a pin-on-disk type wear testers. Discs of ceromer(Targis ; lvoclar Vivadent, Amherst. NY) and discs of type III gold alloy as a control were used f9r test specimens. Intact cusp of premolar and molar were used for enamel specimens. The wear of enamel was determined by weigh-ing the cusp before and after each test, and the weight converted to volumes by average densi-ty of enamel. Surface profilometer was used to quantify wear of the ceromer and gold specimens. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces The results were as follows; 1. Ceromer produced less enamel wear than gold(p<0.05) 2. The wear volume of ceromer was greater than that of gold(p<0.01) 3. The hardess of ceromer was lower than that of gold, but there was no correlation between the hardness and wear of the ceromer and gold. 4. SEM analysis revealed that there were many voids and microcracks in the wear tract of ceromer In gold group, many minute V-shaped grooves were examined.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.77-83
• /
• 1981

The purpose of this study was to observe the bonding strength between tooth surface (enamel and dentin) and restorative filling materials which are two composite resins (Clearfil and Concise) and Glass ionomer cement, after etching with 50% phoshoric acid and 37% citric acid. To measure the bonding strength in enamel, the labial surface of upper anterior tooth was cut flatly with using carborundum disk and polished with sand paper disk, and to measure in dentin, the dentin surface was prepared by grinding upper part of posterior tooth horizontally. After washing the tooth surface with water and drying with air blast, the prepared tooth surface was etched. In glass ionomer cement, 50% phosphoric acid and 37% citric acid were used, in Clearfil 40% phosphoric acid was used and in Concise, 50% phosphoric acid and 37% citric acid were used as etchant for 1 minute. After the copper band which is 5 mm in diameter and 5 mm in height was fixed on the prepared surface and each filling material was inserted into the copper band, the hooking loop was inserted into filled material in the copper band before setting to make it easily that the load is applied on the specimen. After all specimens were immersed in water at $37^{\circ}C$ for 1 week, this specimen was placed on the load cell of tensile test apparatus, and specimen was pulled at the cross-head speed of 0.8 mm per minute. The following results were obtained 1) In glass ionomer cement, the bond strength obtained by 37% citric acid was higher than one obtained by 50% phosphoric acid in enamel and dentin surfaces. The bond strength obtained in non-etched surface was much less than one by etchants in enamel and dentin surface. 2) In Clearfil, the bond strength obtained by 40% phosphoric acid was 4 times more than one obtained by non etch ant. 3) In Concise, the bond strength obtained by 50% phosphoric acid was almost same as one obtained by 37% citric acid, and the bond strength obtained by non etch ant was much less than one obtained by etchants.

• Journal of Oral Medicine and Pain
• /
• 제21권1호
• /
• pp.7-14
• /
• 1996

This study was performed to compare the anticarious effects of different fluoride agents(NaF, $NH_4F, TIF_4,$ APF gel, Elmex gel ) on artificial carious lesion. Enamel samples treated with 5 kinds of fluoride agents by pH cycling method were evaluated for fluorine uptake, enamel solubility, and microhardness. The results were as follows : 1. Greater fluoride uptakes were obtained in carious lesion treated with APF gel and $TiF_4$ solution than in that treated with other fluoride solutions. 2. TiF4 group was more resistant to acid than otter groups, but it was not significantly different with APF gel group. 3. Surface of enamel specimen was harkened by fluoride application and pH cycling. APF gel was more effective on enhancing surface hardness than control group. 4. APF gel, $NH_4F, TIF_4,$ solution were effective on fluoride uptake, enamel solubility, and microhardness.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.365-372
• /
• 1997

This study was executed to measure the shear bond strength of Panavia EX and Panavia 21 when the Ni-Cr-Be alloy castings were cemented to the enamel surfaces with these cements. The cast metal plates of Ni-Cr-Be alloy were sandblasted and cemented to acid etched enamel surface with Panavia EX or Panavia 21. Their shear bond strength were measured with Instron Universal Testing machine. Within the limits of this study, following conclusions were withdrawn. 1. The mean shear bond strength were 26.85.7MPa, in Panavia EX and 28.35.2MPa, in Panavia 21. 2. t-Test revealed no statistical significance between two groups(.05 level) 3. Macroscopically, bond failures were revealed compound fracture at metal and enamel interfaces, in cases of both cements, as the cement attached partly on both metal and enamel surface.

• Restorative Dentistry and Endodontics
• /
• 제38권4호
• /
• pp.194-203
• /
• 2013

Objectives: To investigate the effect of enamel matrix derivative (EMD) on periodontal healing of replanted teeth in animal models. Materials and Methods: The authors searched MEDLINE, PubMed, EMBASE, Cochrane Library, Web of Knowledge and Scopus for articles published up to Oct 2012. Animal studies in which EMD was applied in transplanted or replanted teeth with adequate controls and histological data were considered. Normal periodontal healing or root resorption determined by histology after EMD was applied in replanted teeth with adequate controls was used as outcome measures. The following search strategy was used: ('Emdogain' OR 'enamel matrix proteins' OR 'enamel matrix derivative') AND ('avulsion' OR 'transplantion' OR 'autotransplantation' OR 'replantation'). Results: Six animal studies were included in the final review. There was great heterogeneity in study design among included studies. Two studies with similar study designs were identified and analyzed by a meta-analysis. The pooled estimates showed a significantly higher normal healing and surface resorption and significantly less inflammatory and replacement resorption in EMD-treated groups compared with non-EMD-treated groups. Conclusions: With the limitations of this systematic review, the use of EMD led to greater normal periodontal healing and surface root resorption and less inflammatory and replacement root resorption in the presence of periodontal ligaments. However, no definite conclusion could be drawn with regard to the effect of EMD on periodontal healing and root resorption when no periodontal ligaments exist.

• The Journal of Advanced Prosthodontics
• /
• 제16권1호
• /
• pp.12-24
• /
• 2024

PURPOSE. This study aimed to evaluate the maximum vertical wear, volume wear, and surface characteristic of antagonist enamel, opposing monolithic zirconia or lithium disilicate crowns. MATERIALS AND METHODS. The study comprised 24 participants (n = 12), who were randomly allocated to receive either a 5 mol% Y-TZP or a lithium disilicate crown in positions which would oppose the natural first molar tooth. The contralateral first molar along with its antagonist was considered as the enamel opposing natural enamel control. Data collection was performed using an intraoral scanner and polyvinylsiloxane impression. The means of the maximum vertical loss and the volume loss at the occlusal contact areas of the crowns and the various natural antagonists were measured by 3D comparison software. A scanning electron microscope was subsequently used to assess the wear characteristics. RESULTS. The one-year results from 22 participants (n = 11) indicated no significant differences when comparing the zirconia crown's antagonist enamel (40.28 ± 9.11 ㎛, 0.04 ± 0.02 mm³) and the natural enamel wear (38.91 ± 7.09 ㎛, 0.04 ± 0.02 mm³) (P > .05). Also, there is no significant differences between lithium disilicate crown's antagonist enamel (47.81 ± 9.41 ㎛, 0.04 ± 0.02 mm³) and the natural enamel wear (39.11 ± 7.90 ㎛, 0.04 ± 0.02 mm³) (P > .05). CONCLUSION. While some studies suggested that monolithic zirconia caused less wear on opposing enamel than lithium disilicate, this study found similar wear levels to enamel for both materials compared to natural teeth.

• 대한소아치과학회지
• /
• 제25권3호
• /
• pp.513-524
• /
• 1998

The purpose of this study was to compare the staining ratio on the enamel surface following the use of chlorhexidine mouthwash and the chlorhexidine varnish application. Labial and lingual surfaces of maxillary and mandibular incisors of adults were selected to evaluate the staining ratio. The control group was consisted of 8 individuals, the experimental group 1 and 2 were consisted of 50 each. Prophylaxis with pumice was performed to remove the stain already established on the enamel surface of all groups. The group 1 was asked to use chlorhexidine mouthwash(Hexadent, chlorhexidine gluconate 1ml/100ml) for a minute twice a day. The chlorhexidine $varnish^{(R)}$($Chlorzoin^{(R)}$, consisted of solution 1(10% chlorhexidine acetate) and solution 2(polyurethane sealant)) was applied on the enamel surfaces of the group 2. After 4 weeks of experiment, intraoral photogragh of tooth surfaces were taken in order to record the stained area on the enamel of the control and the experimental groups. Outline of teeth and the stained area in the photographs was traced on the OHP film. Scanner and computer processor were used to calculate stained surface ratio.