• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.79.1-84
• /
• 1995

The thermal analysis method containing micro drilling characteristic is proposed for the first time. There are such problems in thermal analysis of micro hole drilling as the thermal modeling complexity of drilling process and the undesirable micro drilling characteristic. Especially, the undesirable micro drilling characteristic prevents our using conventional thermal modeling. To model the thermal behavior of the micro drilling process, the finite different method, where heat source vectors are distributed by the measured rhrust and torque, is proposed. This method agrees with thermal behavior of the real system. And, it enable to predict the temperature field near the drill during. The validity of this method is verified in comparing with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.697-701
• /
• 1995

The network encironment includes a number of autonomous agents which are widely distributed, have different platforms, and change very dynamically. The information system operated on this environment must solve some basic problems; restrictive client-server models, heterogeneous systems, and intellignet agents. We are using KQML for knowledge management. Java language provides solutions against a strong server dependency and a heterogenous troubles. We introduce KQML as an agent communication language and JATLite as a java agent template. these increase an efficiency of communication on network and enable us to use resources distributed in world wide web. Also, we describe a new agent system architecture and implement it through an example scenario

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.41-45
• /
• 2000

Geotube is made of permeable but soil-tight geotextile, hydraulically filled with soil include dredged sand and mud, which has been successfully applied in hydraulic and coastal engineering projects. Ceotube method is getting popular and being used a lot in many countries of the world because of the simplicity of the placement and construction, cost effectiveness and minimum impact on the environment, and enable to store & isolate contaminated materials as obtained by harbor dredging. Laboratory tests and field construction were performed to determine the design methodology and construction procedures. From the results of laboratory and field construction, the retention ratio of solid particle is a minimum 86%. The minimum permeability and the tensile strength of geotextile are $\alpha$ x 10$^{-4}$ cm/sec and 20t/m, respectively Also, based on the environmental test results, it can be concluded that this method does meet the Korean EPA standards.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.416-420
• /
• 2005

Ideal results of augmentation mammaplasty consist of symmetry, natural shape, soft feeling and inconspicuous scar. In addition, patient's preferences about size and shape should be included. Static implants could not perfectly satisfy patients' desires for size and shape, but expandable implants enable to change the volume after the operation. From September 2001 to September 2004, 76 patients(150 breasts) underwent breast augmentation using permanent expandable implant. The procedure was unilateral in 2 women and bilateral in 74 women. Age ranged from 19 to 50 years(mean, 29 years). Fifty nine patients underwent simple augmentation mammaplasty, 7 patients were corrected of their severe asymmetry, 2 patients with the congenital breast deformity underwent mammaplasty using this, and 2 patients who had undergone unilateral mastectomy were reconstructed of their breasts using expandable implant. There were no definite complications such as capsular contracture, implant rupture, asymmetry. And there reported little dissatisfaction about the size. The permanent expandable implants might be good alternatives in cases of ordinary breast augmentation as well as tissue deficient patients, asymmetry, congenital anomaly, and breast reconstruction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.1
• /
• pp.22-30
• /
• 2004

A micro-fluidic oscillator is used to control a linear actuator in a dynamic microsystem. The pressure difference at its two output ports causes the linear actuator to move, and it is a standard of judging the performance of the oscillator. The performance can be improved by optimizing the geometry of the oscillator, which has to enable fluid jet to switch at low inlet velocity. For this, in this study the relationship between the pressure coefficient (difference) and geometric parameters is obtained through the analysis using the software FLUENT. From the results the optimized model that maximize the output pressure difference is obtained by using a cyclic coordinate method that is one of optimization methods. As a result not only the performance is improved, but also the working range is more widen.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.9-15
• /
• 2000

This paper presents a implementation of digital motion control system for induction motor vector drives using the 16bit DSP TMS320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are speed and current sensing, sine look-up table and generated SVPWM by fully integrated control software. The developed system in a implementation are shown a good speed response and motion control characteristic results, and high performance features in general purposed 2.2[kW] machine. The system can be adapted variform motor drive system.

• Journal of Korea Water Resources Association
• /
• v.30 no.3
• /
• pp.201-210
• /
• 1997

To analyze the flow through open-channel constrictions using $\kappa$-$\varepsilon$ turbulence mode, a numerical model is developed. The simulated results agree well with existing experimental data which attributes to the adequate input of turbulent eddy-viscosity by turbulence model. A stream function and velocity distributions enable the analysis of flow characteristics at the downstream of constriction. Turbulent eddy viscosities over channel are spatially varied with stream pattern. For the evaluation of rapidly varied flow, the eddy-viscosity input by turbulence model is required instead of the empirical effective viscosity to solve a shallow water equation.

• Journal of Community Nutrition
• /
• v.7 no.1
• /
• pp.58-63
• /
• 2005

Identifying quality attributes with the greatest value to the residents is important if the Continuing Care Retirement Community (CCRC) is to increase the frequency of residents' dining. However, it is not known which specific attribute is relatively more important than others to evaluate foodservice. The purpose of this study is to identify the relative importance of food and service quality attributes in the evaluation of foodservice in CCRe. This study surveyed the independent living residents of three CCRCs in the Midwestern states. Respondents placed great importance on taste and flavor of food which has the highest percentage of utility range ($28.28\%$) and the second greatest on appearance of the server ($23.46\%$) . The important attributes were ultimately used to predict the most preferred choice of food-service for residents. Knowledge of the importance of the attributes would enable the foodservice managers in CCRCs to manipulate those attributes to enhance the residents' perceptions of quality and identify strategies for continuous improvement.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.10b
• /
• pp.170-171
• /
• 2005

• Korean Management Science Review
• /
• v.15 no.1
• /
• pp.149-178
• /
• 1998

Strategic Information Systems Planning(SISP) has gained considerable interest among researchers and practitioners in recent years Which has instigated various related research. Neverthless, only 24 percent of the projects recommended as a result of SISP are ultimately performed. This statistics raise the questions for the need of SISP. This study provides the framework that may enable SISP to be more effectively utilized by studying factors for consideration from the review of pertinent literature. These factors will then be validated by case studies of domestic companies and by simultaneously inducing key characteristics and solutions of SISP. The result of the study indicate some inconsistency between literal factors and the case study. The factors added through case study were considered to be actual factors of SISP. This study emphasized the role of the senior manager, the quality of the implementation of the state plan, change management and the capability of the planning team. As a key characteristics of domestic companies considered was the general lack of ability to collect and analyze data. In addition, the domestic companies have little consideration of the organizational contingency factors.