• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.915-922
• /
• 2017

The study on the thermal and oil resistance rubber composite, 2016. [6] predicted the lifetime of Fluorocarbon Rubber by accelerating aging at high temperature ($150^{\circ}C$, $175^{\circ}C$, $200^{\circ}C$). general rubber products are likely to exhibit different properties depending on the degradation factors such as temperature, humidity, ozone, light, emulsion, mechanical and electrical stress. To solve these problems, We compared the rate of change about tensile strength, elongation rate, volume change rate, weight change rate, thickness change rate, thermal conductivity in low temperature promoting aging on the basis of predictive lifetime of high temperature promoting aging. As a result of the review, the required life expectancy was satisfied, but there was a slight difference in the rate of change between the high-temperature promoted aging life result and the low temperature promoted aging life result. The cause was a reduction in "tensile strength / elongation" and an increase in "volume / weight / thickness" caused by the main chain decomposition of fluorine rubber due to aging at high temperature promoting aging. However, the low temperature promoting aging was caused by the curing reaction of fluorine rubber at $80^{\circ}C$. The tensile strength / elongation and volume / weight / thickness changes were small.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.208-215
• /
• 2012

To study the effect of surface crosslinked layer on the crosslinked poly(sodium acrylate) (cPSA) absorbent, we synthesized several surface crosslinked cPSAs with 5, 10 and 20 g of ethylene glycol dimethacrylate (EGDMA) by an inverse emulsion polymerization method to delay the absorption of excess water in concrete. We measured the compressive and flexural strength of mortars having 0.5, 1.0 and 1.5 wt% cPSA-EGDMA. We observed the increase of compressive and flexural strength of the cPSA-EGDMA added cement mortars except for the 0.5 wt% cPSA-EGDMA (20 g) added cement mortar. 1.0 wt% cPSA-EGDMA (5 g) added cement mortar showed about 16% and 10% increased compressive and flexural strength than those of plain cement mortar. To study the effect of porosity on compressive and flexural strength, we used FE-SEM and porosimeter. FE-SEM analysis showed swollen cPSMAEGDMA (5 g) filled between calcium silicate hydrate (C-S-H) crystals. We observed the decreased porosity of the cPSA-EGDMA added cement mortars than that of plain cement mortar. 1.0 wt% cPSA-EGDMA (5 g) cement mortar showed the lowest porosity of 16.5%.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.276-283
• /
• 2008

Kind of monomer(MMA, EA, BA, St)and the monomer ratio(80/20 to 20/80) where changed in the preparation of the core shell binder, and property was improved the plasma processing. Each material changed by plasma treatment time($1{\sim}10\;s$) to change to measure the tensile strength, contact angle and adhesion peel strength for the core shell binder optimal conditions for handling the output of the surface treatment. The type of polymerization and composition of the binder is a regardless initiator of APS, the reaction temperature of $85^{\circ}C$ to 0.3 wt% of the surfactant used to indicate when the conversion rate was the highest, core shell composite particle binder got two glass temperature curves. Core shell binder after the plasma processing contact angle change is the PEA/PSt 38 percent of cases within five seconds to indicate slight decrease was a decline rapidly if not handled $0^{\circ}$ to reach. Tensile strength PSt/PMMA varies $46.71{\sim}46.27\;kg_f$/2.5 cm and adhesion strength PEA/PMMA varies $7.89{\sim}14.44\;kg_f$/2.5 cm increases. Overall, adhesion strength of core shell composite particle is in the order of order PEA>PBA>PSt for shell monomer MMA.

• Journal of Adhesion and Interface
• /
• v.17 no.2
• /
• pp.49-55
• /
• 2016

In this study, we designed an environment friendly, water-based adhesive using the acrylic emulsion method as a replacement for solvent-based adhesives, which are most commonly used in layered laminates for flexible food packaging. We designed adhesives with different combinations of anionic, non-ionic, and phosphoric ester surfactants, and with different concentrations of chain transfer agent (CTA). We also examined the effect of the degree of cross-linking by synthesizing and comparing 8 test group adhesives with different types of functional monomers. Additionally, we synthesized 2 other test group pressure-sensitive adhesives (PSA) using styrene/alpha-methyl styrene/acrylic acid (SAA) semipolymer dispersing agents (with molecular weights of 13,000 g/mol and 8,600 g/mol, respectively) to replace the conventional surfactants. We evaluated whether the 10 test group pressure-sensitive adhesives met the basic physical property criteria required for flexible food packaging by carrying out a physical analysis of their glass transition temperature (Tg), particle size, adhesion, and molecular weight. In our test, 2 test group adhesives manufactured with the combination of anionic and non-ionic surfactants, CTA concentration of 0.2%, and functional monomers of hydroxyethyl acrylate (HEA) and glycidyl methacrylate (GMA) demonstrated molecular weight and flexibility suitable for flexible packaging, with low adhesiveness and small particle size.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.2
• /
• pp.121-128
• /
• 2010

We investigated the effects of skin hydration and composition analysis of proteoglycan (chia seed polymer) produced from chia (Salvia hispanica) seed. The result showed that proteoglycan of chia seeds is composed of galactose (46.8 %), glucuronic acid (27.1 %), rhamnose (8.7 %), xylose (7.6 %), glucose (4.9 %), fructose (2.3 %), mannose (1.8 %), arabinose (0.9 %) and the amount of proteins contained is 31.3 mg/g with the constituent amino acid compositions (mg/g) of Asp (1.9), Glu (3.6), Ser (0.9), Gly (3.6), Thr (0.8), Arg (1.0), Ala (2.0), Tyr (0.4), Cys (4.8), Val (1.1), Phe (0.5), Ile (0.6), Leu (0.9). The molecular weight of the proteoglycan measured by GPC (Gel Permeation Chromatography) is the range of 100,000~250,000 Da and the average molecular weight is 170,000 Da. The moisturizing effects and trans-epidermal water loss (TEWL) of chia seed polymer in cosmetic products (O/W emulsion) were studied in vivo. Chia seed polymer showed good skin hydration effects when compared with sodium hyaluronate which is a common moisturizer. Taken all together, chia seed polymer should be a very useful cosmetic ingredient as a moisturizer and a protecting agent from various skin irritations.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.320-324
• /
• 2003

Combined effect of modified atmosphere packaging and gamma irradiation on color characteristics of emulsion-type cooked pork sausage were investigated. Nitrosomyoglobin (NO-Mb) contents and CIE color values of sausage with aerobic, $CO_2, \;N_2$, and $CO_2/N_2$ packagings were observed during storage for 4 weeks. Irradiation reduced NO-Mb content in sausage, inducing denitrosylation of nitrite-cured meats. $CO_2$ and $CO_2/N_2$ packagings were effective for maintaining NO-Mb content. In CIE color values, $a^*$ was significantly reduced by irradiation at 5 kGy and above. The $a^*$ values of sausages with $CO_2$ and $CO_2/N_2$ packagings were higher than those of aerobic or $N_2$ packaging. Results indicated that modified atmosphere packaging, such as $CO_2$ or $CO_2/N_2$ packaging, was effective for minimizing the loss of red color in sausage caused by irradiation.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.211-217
• /
• 1984

To study affinity of proteolytic enzymes to soy proteins, the physicochemical and functional properties of enzymatically modified protein products, kinetic parameters and degree of hydrolysis were measured using trypsin, alcalase (serine type protease) and pronase. Bacterial alcalase and pronase showed much greater affinity to soy protein than animal intestinal trypsin. This effect was very significant when unheated soy isolate was used as a substrate. Specific activities of these enzymes decreased with the increment of substrate concentration (over 2.0%, w/v) when heat denatured soy protein was used as a substrate. However, the decrease in specific activity was negligible at substrate concentrations lower than 2.0%. Polyacrylamide gel electrophoretic results showed that the pattern of 2S protein band changed distinctly in alcalase hydrolysis as compared with those of trypsin and pronase. Protein solubilities of alcalase and pronase hydrolyzates increased by 25-30%, at their pI (pH 5.0) over the control. Virtually no change was observed in solubility by trypsin hydrolysis. Heat coagulability and calcium-tolerance of the protein increased by enzymatic hydrolysis. No clear tendency, however, was observed for emulsion properties, foam expansion and the amount of free -SH groups. The enzyme treatment considerably decreased foam stability.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.217-223
• /
• 2015

We investigated the emulsifying properties of barley octenyl succinic anhydride (OSA)-${\beta}$-glucan, such as changes in the fat globule size and zeta-potential as influenced by pH or the addition of NaCl. Additional experiments to fabricate a suitable co-surfactant system were also performed. We found that the fat globule size in OSA-${\beta}$-glucan emulsions increased upon lowering the pH (i.e., under acidic conditions) or increasing the NaCl concentration. These results were confirmed through microscopic observation. Co-surfactant hydrophilic Tween 20 was found to be suitable for the OSA-${\beta}$-glucan emulsion, which facilitated the formation of smaller fat globules and enhanced the creaming stability when it was added in >0.2 wt% concentration. From the results of the surface load of OSA-${\beta}$-glucan in emulsions, Tween 20 addition enhanced the stability probably by the co-adsorption of the two surfactants at the droplet surface.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.384-388
• /
• 2002

Gamma irradiation was used to reduce the N-nitrosamines in emulsion-type cooked pork sausage during storage at 4$^{\circ}C$. The sausage without ascorbate to maximize the N-nitrosamine formation and the sausage with 200 ppm sodium ascorbate were prepared, respectively. The sausages were aerobically or vacuum packaged and irradiated at 0, 5, 10 and 20 kGy. A statistically significant difference was not shown in N-nitrosodimethylamine (NDMA) and N-nitrosopyrrelidine (NPYR) levels in the sausage prepared with sodium ascorbate at 0 week, while the NDMA and NPYR reduction was observed after 4 weeks storage. The NDMA level in the sausage without sodium ascorbate and irradiated at 10 kGy or above reduced in aerobic packaging, while a dose of 20 key was needed in vacuum packaging. The N-nitroscpyrrolidine reduction was shown at 20 and 30 kGy-irradiation. The results indicated that gamma irradiation was effective to reduce N-nitrosamines level in sausage during storage.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.411-421
• /
• 2005

This study was carried out to establish rational methodologies for the use of pesticide formulations to be sprayed after water-dilution. Hardness and electric conductivity of six major river water and ground water sampled from 52 sites in major rice-growing areas across the country ranged from 5 to 324 ppm(av. 90 ppm) and from 0.038 to 1.078 dS/m(av. 0.265 dS/m), respectively, which are acceptable for diluent water of pesticides. The pH changes in pesticide spray solutions with time after preparation mainly depended on the pH of the water used for pesticide dilution. The surface tensions of pesticide spray solutions reduced slightly with time after preparation, irrespective of kinds of pesticide formulations. Suspensibility of WPs became worse with an increase in the hardness and salt concentrations of diluent water, even though the degree was negligible. Emulsion stability of ECs became worse with an increase in hardness and salt concentrations of diluent water. Degradation rates of the active ingredients of pesticide spray solutions 3 days after preparation were less than 5%, regardless of mixing or non-mixing of two or more pesticides. Consequently, the spray solutions of most pesticides were usable until two to three days after preparation unless physical properties deteriorated. The tank-mixing order of EC and WP formulations did not make any differences in all the physical properties of pesticide spray solutions. However, the proper order for the tank-mixing of compatible pesticides was WP, WG, SC, EC, and SL, because the order is easy to prepare the pesticide spray solutions. The efficacy of pesticide spray solutions on the respective target pathogens and insect pests of rice plants three days after preparation was recorded over 95% of that of 0 day, which was almost the same as that of the solutions applied punctually after preparation.