• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.4
• /
• pp.123-130
• /
• 2012

The automobile industry has been rapidly developing and the manufacturers in Korea as well as auto makers in other advanced countries are putting every ounce of their energies in securing their competitive edges in technology and in marketing. To that purpose, each company focuses on (i) reducing costs and (ii) improving productivity. We believe that the improved productivity can be capitalized by a set of various factors including improved organization-internal environment and employees' job satisfaction. The present research aims to identify how the internal elements contribute and lead to improved productivity. The present paper is a report of an empirical survey performed to 161 employees working in small and medium-sized firms in the automobile industry. After testing reliability and validity of the collected data, we have performed structural equation analysis using Amos of SPSS and tested a set of research hypotheses and models. The reported results will clarify the factors that influence productivity and job satisfaction and also shed light on the directions for strategic polices to keep up with the ever changing climate of the industry.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.130-137
• /
• 2007

The optimized prosthetic mass distribution was a controversial problem in the previous studies because they are not supported by empirical evidence. The purpose of the present study was to evaluate the effect of prosthetic mass properties by modeling musculoskeletal system, based on the gait analysis data from two above-knee amputees. The joint torque at hip joint was calculated using inverse dynamic analysis as the mass was changed in knee and foot prosthetic components with the same joint kinematics. The results showed that the peak flexion and abduction torque at the hip joint were 5 Nm and 15 Nm when the mass of the knee component was increased, greater than the peak flexion and abduction torque of the control group at the hip joint, respectively. On the other hand, when the mass of the foot component was increased, the peak flexion and abduction torque at the hip joint were 20 Nm and 15 Nm, greater than the peak flexion and abduction torque of the control, respectively. The hip flexion torque was 4.71-fold greater and 7.92-fold greater than the hip abduction torque for the knee mass increase and the foot mass increase on the average, respectively. Therefore, we could conclude that the effect of foot mass increase was more sensitive than that of knee mass increase for the hip flexion torque. On the contrary, the mass properties of the knee and foot components were not sensitive for the hip abduction torque. In addition, optimized prosthetic mass and appropriate mass distributions were needed to promote efficiency of rehabilitation therapy with consideration of musculoskeletal systems of amputees.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.3
• /
• pp.440-453
• /
• 2017

In this study, we conducted an empirical analysis using structural equation modeling (SEM) by distributing questionnaires to 208 Chinese tourists who constitute the largest proportion of foreign tourists visiting South Korea. The survey was conducted in a face to face (FTF) manner with the aim to contribute to globalization of Korean cuisine through comprehensive analysis of the effects of preference characteristics of Korean wave dramas on the relationship among images, attitudes, and purchase intentions for Korean cuisine. The main actor characteristics among the preference characteristics of Korean wave dramas had a significant effect on the attitudes and purchase intentions for Korean cuisine. However, the thematic characteristics among the preference characteristics of Korean wave dramas did not have a significant effect on the purchase intentions for Korean cuisine; in addition, the production characteristics did not have a significant effect on the attitudes and purchase intentions for Korean cuisine. The eco-friendly and health images of Korean cuisine had a significant effect on the purchase intentions for Korean cuisine, and the attitudes toward Korean cuisine significantly affected the purchase intentions for Korean cuisine. Based on the results of this study, it is considered necessary to continuously publicize Korean cuisine through Korean wave dramas to build positive attitudes toward Korean cuisine through enhanced images of Korean cuisine.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.3
• /
• pp.101-119
• /
• 2011

A empirical study investigating firms' attitudes and behaviors regarding of RFID technology within supply chain is very limited. Thus, this study examines the determinants influencing firms' adoption and performance of RFID within the supply chain. Particularly, this study focus on the impacts of the companies' relationship characteristics, including strategic fit, interdependence, compatibility, and long-term orientation affection RFID adoption and performance within the supply chain. Furthermore, the study includes environment uncertainty as a moderating effect between relationship characteristics and RFID adoption. The proposed research model was tested using structural equation modeling from 227 employees. Results of this study support the proposed hypotheses. The implication of this study suggest a new theoretical framework explaining RFID adoption and performance with the supply chain.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.469-485
• /
• 2016

The failure of rock mass around deep tunnel, different from shallow tunnel largely affected by discontinuities, is dominated by magnitudes and directions of stresses, and the failures dominated by stresses can be divided into ductile and brittle features according to the conditions of stresses and the characteristics of rock mass. It is important to know the range and the depth of the V-shaped notch type failure resulted from the brittle failure, such as spalling, slabbing and rock burst, because they are the main factors for the design of excavation and support of deep tunnels. The main features of brittle failure are that it consists of cohesion loss and friction mobilization according to the stress condition, and is progressive. In this paper, a three-dimensional numerical model has been developed in order to simulate the brittle behavior of rock mass around deep tunnel by introducing the bi-linear failure envelope cut off, elastic-elastoplastic coupling and gradual spread of elastoplastic regions. By performing a series of numerical analyses, it is shown that the depths of failure estimated by this model coincide with an empirical relation from a case study.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.9-14
• /
• 2011

This Paper proposed the prediction method of fuel consumption from vehicle informations through OBD-II Interface. We assumed RPM, TPS had a relationship with fuel consumption. We got the output as fuel-consumption from a vehicle RPM, TPS as input by using polynomial equation. We had modelling as quadric function with OBD-II data and fuel consumption data supported by automotive company in real. In order to verify the effectiveness of proposed method, 5 km real road-test was performed. The results showed that the proposed method can estimate precisely the fuel consumption from vehicle multi-data.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.150-160
• /
• 2016

The quality of service in ERP services is a key issue in innovating the ERP performance as an IT service for corporations. Currently, most of the research works for this area are based on the existing quality models such as SERVQUAL, which are said not to measure service quality properly. Also, it does not consider the factor of the system acceptance, which is thought to be closely related to the quality of service in this type of IT services. Therefore, a research model is required, which can address the issues related to the ERP service quality measurements. In this paper, new research models have been proposed, and empirical data obtained from SME's ERP users have been applied to the proposed model to analyze the causal relationship between quality factors and to identify the most suitable quality measures. Also, the relationship between the service quality and the system acceptance was analyzed using a combined model. The results show that factors such as productivity and convenience affects the quality mostly and that the most appropriate measure for the service quality of ERP service is satisfaction. Also, for the system acceptance, the ease-of-use is the main factor. And, the service quality and system acceptance shows a strong correlation. This means that, in order to enhance the quality of ERP services, the service provider needs to provide customers with productivity-enhanced user-friendly IT services and active product support. The work of this research can help to improve the service quality and the user acceptance of ERP services and to lead further research works in this area.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.141-145
• /
• 2005

To investigate the relationship between the milling degree and color of milled rice, an empirical whiteness model was developed according to the milling degree from $0\%\;to\;20\%$ using paddy of three different varieties of Chuchung, Nampyong and Odae. The values of determination coefficient and the root mean square error between measured and predicted whiteness were 0.990, 0.877, respectively, and the whiteness model was proved to be quite applicable. The relationships between whiteness values and color factors in several color systems were tested to select useful color factors for development of convenient whiteness meter. The whiteness value of milled rice according to degree of milling could be converted into b and Hunter whiteness in Lab color system. B in RGB color system at high values of determination coefficient were 0.990, 0.985, and 0.989, respectively.

• The Korean Journal of Applied Statistics
• /
• v.26 no.4
• /
• pp.623-634
• /
• 2013

In this study, we provide empirical evidence of whether a spatial correlation among mode choices at the TAZ(Traffic Analysis Zone) level exists based on transit smart card data observed in Seoul, Korea. The results show that the areas with a higher probability that passengers choose to take a bus are clustered and that those regions have fewer metro stations than bus stations. We also found that the spatial correlation turned out to be statistically meaningful and provided an opportunity for the potential use of the spatial correlation in modeling mode choices. A reliable spatial interaction would constitute valuable information for transportation agencies in terms of their route planning and scheduling based on the transit smart card data.

• The Journal of Korean Association of Computer Education
• /
• v.8 no.6
• /
• pp.55-63
• /
• 2005

The purpose of this study is to explore which factors influence the performance of computer practice-education in vocational high schools. We collected 604 response data from total 7 vocational high schools in Seoul City to test empirical analysis using SEM(Structural Equation Modeling) frequently used in social-science area. According to our results, all independent variables(learner's response learner's motivation, learner's attitude, learning contents, intention to learn, learner's ability and learning behavior) were found positively influencing learning performance of students. Based upon them we contributed our research model to combine TRA theory in psychology with Holton theory for academic implications. And also, from the perspective of practical implication, we can expect that our results will provide some useful guidelines for operating effective computer-practice education.