• 한국농공학회지
• /
• 제38권2호
• /
• pp.75-86
• /
• 1996

The formulas for estimating the constants of storage function model including K and TL for runoff analysis and a distributed storage function model are discussed in this study. First, the relations between parameters of the storage function model and the kinematic runoff model are theoretically examined, and then optimum constants of storage function model are obtained by the Standardized Davidson-Fletcher-Powell (SDFP) method. Through this analysis, theoretical formulas were obtained as $K = 0.63 {\alpha} KsB{^0.6}$ and $T_{L}=0.11 {\alpha} KsB{^0.6} r{^0.4} {_e}$, which are difficult to use practically because of the unclarified definition of shape factors. From a practical point of view, empirical formula were derived as $K=15.6{^0.3} {_m}$ and $T_{L}=2.1B{^0.36} {_m} {_e}/r{^0.4} {_e}$ for applied watersheds. The proposed formulas are verified for several recoded floods at a few points of watersheds. It is also found that the distributed storage function. can be applied to flood runoff analysis using the new formulas aboved mentioned.

• Communications for Statistical Applications and Methods
• /
• 제15권1호
• /
• pp.137-145
• /
• 2008

We present formulas for two types of cap pricing under fBm-HJM model reflecting the empirical long range dependence in the interest rate model. In particular, we propose a new approach to pricing the cap with the default risk.

• 한국항공우주학회지
• /
• 제47권11호
• /
• pp.768-778
• /
• 2019

고속으로 비행하는 항공기의 구성품에 관한 적절한 설계를 위해서는 공기역학적 가열과 표면 온도를 계산하는 능력이 필수적이다. 본 연구에서는 항공기의 공력가열을 효율적으로 계산하기 위한 다양한 경험식들을 분석한 다음, 경험식에 기초한 전산코드를 개발하였다. 계산된 결과는 Navier-Stokes-Fourier 방정식 기반의 ANSYS FLUENT와 경험식에 기초한 ThermoAnalytics사의 MUSES 코드의 결과와 비교하였다. FLUENT의 계산결과와는 벽면 및 정체점 온도에 대해 매우 일치하였다. MUSES 코드와도 온도와 열유속에서 각각 1%, 5%의 차이를 보여주어 매우 근접한 결과를 보여 주었다.

• Wind and Structures
• /
• 제16권6호
• /
• pp.603-616
• /
• 2013

This study is aimed at formulating an empirical equation for the across-wind fluctuating moment and spectral density coefficient, which are needed to estimate the across-wind dynamic responses of tall buildings, as a function of the side ratios of buildings. In order to estimate an empirical formula, wind tunnel tests were conducted on aero-elastic models of the rectangular prisms with various aspect and side ratios in turbulent boundary layer flows. In this paper, criteria for the across-wind fluctuating moment and spectral density are briefly discussed and the results are analyzed mainly as a function of the side ratios of the buildings. Finally, empirical formulas for the across-wind fluctuating moment coefficient and spectral density coefficient according to variation of the aspect ratio are proposed.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.539-547
• /
• 2014

Ship squat is a well known phenomenon, which means an additional sinkage and a change of trim when a ship sails in shallow water. As a series of ship squat study, a HPMM(Horizontal Planar Motion Mechanism) test of KVLCC2 model ship to measure a sinkage and a trim in shallow water was conducted. Additionally a CFD(Computational Fluid Dynamics) analysis was carried out to simulate fluid flows around the ship surface. A change in ship speed, drift angle at three depth conditions(H/T = 1.2, 1.5 & 2.0) is considered for comparing these results. As a result, an increase of the ship speed and the drift angle caused an increase in ship squat in EFD(Experimental Fluid Dynamics), and created a lower pressure on the ship bottom area in CFD. Lastly the sinkage results of KVLCC2 by EFD and CFD are compared to results by three empirical formulas. The tendency of sinkage by EFD and CFD is similar to the results of empirical formulas.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.667-671
• /
• 2005

이 연구는 선박 설계 초기단계에서 선형 변화에 따른 선박 조종성능 추정에 관한 내용을 다루었다. 선박제원을 대표하는 파라메터 그리고 선미형상의 변화를 민감하게 반영할 수 있는 새로운 파라메터를 선정하는 작업을 수행하였다. 이렇게 선정된 파라메터와 유체력 미계수와의 상관관계를 알아보기 위하여 구속모형 실험을 수행하였다. 그 결과 기본적인 선박제원 중 선체 유체력 미계수와 상관도가 높은 파라메터를 가려낼 수 있었다. 또한 선미형상의 새로운 파라메터와 조종성능과의 상관도를 추정할 수 있었다. 또한 이를 활용하여 유체력미계수에 대한 새로운 경험식을 제시하였다. 이를 활용하면, 초기 선형 설계 시 선형변화 및 수정에 따른 조종성능 추정에 활용할 수 있을 것으로 판단된다.

• Steel and Composite Structures
• /
• 제25권5호
• /
• pp.617-624
• /
• 2017

In this study, a new empirical method is presented to obtain Dynamic Increase Factor (DIF) in nonlinear static analysis of structures against sudden removal of a gravity load-bearing element. In this method, DIF is defined as a function of minimum ratio of difference between maximum moment capacity ($M_u$) and moment demand ($M_d$) to plastic moment capacity ($M_p$) under unamplified gravity loads of elements. This function determines the residual strength of a damaged building before amplified gravity loads. For each column removal location, a nonlinear dynamic analysis and a step-by-step nonlinear static analysis are carried out and the modified empirical DIF formulas are derived, which correspond to the ratio min $[(M_u-M_d)/M_p]$ of beams in the bays immediately adjacent to the removed column, and at all floors above it. Therefore, the new DIF can be used with nonlinear static analysis instead of nonlinear dynamic analysis to assess the progressive collapse potential of a moment frame structure. The proposed DIF formulas can estimate the real residual strength of a structure based on critical member.

• 한국해안해양공학회지
• /
• 제7권3호
• /
• pp.257-264
• /
• 1995

파와 해류가 동시에 작용할 때 소류사 이동에 미치는 제 요인을 파악하고, 합성류 소류사량 산정을 위하여 이들 제 요인 중 평균마찰력과 최대마찰력을 모두 고려하기 위하여 하천 소류사량 산정식들 중 적절한 형식 몇가지를 선택하였다. 합성류에 의한 최대마찰력과 평균마찰력의 산정을 위하여 BYO 모형을 적용하였으며, 일방향흐름 마찰계수 산정식은 수정 Keulegan식을 사용하였고 등가조고는 일방향흐름 관측결과와 일치하는 마찰력이 산정되는 수치를 택하였다. 각 소류사량 산정식에 도입된 비례상수는 Bijker(1966)의 수조관측자료에 적용하여 결정하였으며, 최종 결과로부터 각 산정식을 비교하여 논하였다.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.34-41
• /
• 2014

When a ship sails in shallow water, it is well known that an additional sinkage and trim of the ship(squat) is caused by change of hydrodynamic force between the seabed and the bottom of a ship. In this paper, to examine this phenomenon by model tests, the squat of KCS model ship at a low speed is measured by the vision based ship motion measurement system during HPMM tests. Various combinations of a ship speed, a rudder angle and a drift angle were tested at three depth conditions(H/T = 1.2, 1.5 & 2.0). As a result, increase of the ship's speed and ship's drift angle caused an increase in ship squat, but the ship's rudder angle did not. The rate of increase in ship squat was the most at H/T = 1.2 condition. Lastly these experimental results are compared to the results by three empirical formulas and two CFD methods. The tendency of ship squat measured by experiment is similar to those of empirical formulas.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권4호
• /
• pp.699-707
• /
• 2015

The ice-resistance estimation technique for icebreaking ships had been studied intensively over recent years to meet the needs of designing Arctic vessels. Before testing in the ice model basin, the estimation of a ship's ice resistance with high reliability is very important to decide the delivered power necessary for level ice operation. The main idea of previous studies came from several empirical formulas, such as Poznyak and Ionov (1981), Enkvist (1972) and Shimansky (1938) methods, in which ice resistance components such as icebreaking, buoyancy and clearing resistances were represented by the integral equations along the Design Load Water Line (DLWL). The current study proposes a few modified methods not only considering the DLWL shape, but also the hull shape under the DLWL. In the proposed methodology, the DLWL shape for icebreaking resistance and the hull shape under the DLWL for buoyancy and clearing resistances can be directly considered in the calculation. Especially, when calculating clearing resistance, the flow pattern of ice particles under the DLWL of ship is assumed to be in accordance with the ice flow observed during ice model testing. This paper also deals with application examples for a few ship designs and its ice model testing programs at the AARC ice model basin. From the comparison of results of the model test and the estimation, the reliability of this estimation technique has been discussed.