• 설비공학논문집
• /
• 제16권6호
• /
• pp.584-588
• /
• 2004

This work was performed to investigate the heat transfer characteristics of the circular fin-tube heat exchanger. This paper contains the experimental data for the seven kinds of fin geometries. The correlation of Stasiulevicius agreed with the experimental data at high Reynolds number, however not well at low Reynolds number. The Nusselt number was well correlated with Graetz number, and showed a transition near Gz=10. An empirical correlation proposed in the present work agreed well with the experimental data.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.333-338
• /
• 1995

This paper discusses the methods for building up the empirical CHF correlation, Direct Substitution Method (DSM) and Heat Balance Method (HBM). It also includes consideration on the CHF manin, which ran be expressed differently depending on the correlation types in use. Some findings an presented with exemplary calculation.

• Steel and Composite Structures
• /
• 제33권2호
• /
• pp.181-194
• /
• 2019

This paper presents an efficient approach to generate a new empirical formula to predict the axial compression capacity (ACC) of circular concrete-filled tube (CCFT) columns using the artificial neural network (ANN). A total of 258 test results extracted from the literature were used to develop the ANN models. The ANN model having the highest correlation coefficient (R) and the lowest mean square error (MSE) was determined as the best model. Stability analysis, sensitivity analysis, and a parametric study were carried out to estimate the stability of the ANN model and to investigate the main contributing factors on the ACC of CCFT columns. Stability analysis revealed that the ANN model was more stable than several existing formulae. Whereas, the sensitivity analysis and parametric study showed that the outer diameter of the steel tube was the most sensitive parameter. Additionally, using the validated ANN model, a new empirical formula was derived for predicting the ACC of CCFT columns. Obviously, a higher accuracy of the proposed empirical formula was achieved compared to the existing formulae.

• Journal of the Korean Data and Information Science Society
• /
• 제7권2호
• /
• pp.235-245
• /
• 1996

확률변수 (X,Y)가 이변량 정규분포를 따르는 경우, 모상관계수 ${\rho}$에 관한 여러 가설들 중에서 $H_{0}:{\rho}={\rho}_{0}$인 경우에는 알려진 분포를 이용한 통계적 추론을 하기가 어렵다. 이러한 경우 Fisher에 의해 제안된 Z-변환을 이용한 근사적 검정법이 사용되어 오고 있으나 근사적인 방법이기 때문에 주어진 표본의 크기가 충분히 많지 않은 경우에는 적용에 무리가 있을 수 있다. 그래서 본 논문에서는 먼저 표본 상관계수 R의 분포를 모의실험을 통하여 직접 구하여 검정한 정확 검정법과, 붙스트랩(bootstrap) 방법을 이용하여 구한 붙스트랩 검정법을 제시하고, Fisher의 방법의 효율성과 실제성을 검토하고 제시된 방법들과 서로 비교하고자 한다.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.667-671
• /
• 2005

이 연구는 선박 설계 초기단계에서 선형 변화에 따른 선박 조종성능 추정에 관한 내용을 다루었다. 선박제원을 대표하는 파라메터 그리고 선미형상의 변화를 민감하게 반영할 수 있는 새로운 파라메터를 선정하는 작업을 수행하였다. 이렇게 선정된 파라메터와 유체력 미계수와의 상관관계를 알아보기 위하여 구속모형 실험을 수행하였다. 그 결과 기본적인 선박제원 중 선체 유체력 미계수와 상관도가 높은 파라메터를 가려낼 수 있었다. 또한 선미형상의 새로운 파라메터와 조종성능과의 상관도를 추정할 수 있었다. 또한 이를 활용하여 유체력미계수에 대한 새로운 경험식을 제시하였다. 이를 활용하면, 초기 선형 설계 시 선형변화 및 수정에 따른 조종성능 추정에 활용할 수 있을 것으로 판단된다.

• 상하수도학회지
• /
• 제20권5호
• /
• pp.737-745
• /
• 2006

The goal of this study is to present an external pit corrosion rate($p_{ecr}$) model with considering both the age of pipe and the soil characteristics. The correlation of nonlinear exponential model among conventional empirical models was a little higher than other empirical models in the prediction of $p_{ecr}$ according to the age of pipe. However, there has been a limit to predict Peer with the model by using only a pipe age since installation as a variable. The soil analysis results from sixty nine samples showed that all of the samples were non corrosive in the assessment of ANSI/AWWA scoring system. The correlation of soil corrosion factors and $p_{ecr}$ was also low. The application result of linear and nonlinear regression models that soil characteristics only showed a low correlation with $p_{ecr}$ Proposed nonlinear regression model in this study, with considering both the age of pipe and the soil characteristics, showed a little higher correlation ($R^2=0.46$) than conventional model.

• 한국농공학회논문집
• /
• 제62권4호
• /
• pp.45-51
• /
• 2020

The poisson's ratio was obtained from the effective vertical stress and horizontal stress of consolidation-undrained test. It was analyzed void ratio verse poisson's ratio. At the result, the effective friction angle was increase with relative density increased, was decreased the poisson's ratio. The empirical equation of void ratio and poisson's ratio was showed very high correlation r²=0.846. The empirical equation was showed that the smaller the void ratio in the fine grained soil than granular soil. In the case of 0.85 times the correlation analysis equation of granular and fine grained soil, the experimental results were shown very similarly. In especially, the poisson's ratio prediction results was shown within 5% of the error range, was revalidation 0.85 times the correlation analysis equation using the void ratio. In this study, correlation analysis equation of the granular and fine grained soil was more reliability of the poisson's ratio prediction results apply to the void ratio than dry unit weight.

• Restorative Dentistry and Endodontics
• /
• 제49권2호
• /
• pp.21.1-21.8
• /
• 2024

Objectives: This paper aims to serve as a useful guide for sample size determination for various correlation analyses that are based on effect sizes and confidence interval width. Materials and Methods: Sample size determinations are calculated for Pearson's correlation, Spearman's rank correlation, and Kendall's Tau-b correlation. Examples of sample size statements and their justification are also included. Results: Using the same effect sizes, there are differences between the sample size determination of the 3 statistical tests. Based on an empirical calculation, a minimum sample size of 149 is usually adequate for performing both parametric and non-parametric correlation analysis to determine at least a moderate to an excellent degree of correlation with acceptable confidence interval width. Conclusions: Determining data assumption(s) is one of the challenges to offering a valid technique to estimate the required sample size for correlation analyses. Sample size tables are provided and these will help researchers to estimate a minimum sample size requirement based on correlation analyses.

• 한국화재소방학회논문지
• /
• 제16권2호
• /
• pp.51-58
• /
• 2002

몬트리올 의정서에 의해서 규제받는 Halon-1301과 대체 물질중의 하나인 $CO_2$의 물성(밀도, 점도, 엔탈피)의 실험식을 구하였다. 문헌에서 얻은 실험값을 이용하여 온도에 대한 회귀분석에 의해서 실험식을 얻었다. 압축인자를 이용하여 온도에 대한 2차 함수로서 밀도에 관한 실험식을 제안하였다. 점도는 온도에 대한 지수함수로 표시되며, 보정인자를 사용하여 사용 온도범위를 확장하였다. 엔탈피는 열용량과 마찬가지로 온도에 대한 2차 함수로 정의하여 나타내었다. 본 연구에서 제안된 위의 실험식의 상관계수는 0.99 이상이었다.

• 조명전기설비학회논문지
• /
• 제29권7호
• /
• pp.80-86
• /
• 2015

As wind farm outputs depend on natural wind resources that vary over space and time, spatial correlation analysis is needed to estimate power outputs of wind generation resources. As a result, geographic information such as latitude and longitude plays a key role to estimate power outputs of spatially distributed wind farms. In this paper, we introduce spatial correlation analysis to estimate the power outputs produced by wind farms that are geographically distributed. We present spatial correlation analysis of empirical power output data for the JEJU Island and ERCOT ISO (Texas) wind farms and propose the Correlation Decay Distance (CoDecDist) model based on geographic correlation analysis to enhance the estimation of wind power outputs.