• 제목/요약/키워드: Emission trend

검색결과 335건 처리시간 0.025초

Persistent Organic Pollution and Arsenic Contamination in Asia Pacific Water: Case Study of Emerging Environmental Problems in Vietnam

  • Pham, Viet.H.
    • 한국습지학회지
    • /
    • 제9권1호
    • /
    • pp.79-89
    • /
    • 2007
  • This paper provides a comprehensive overview of the present status of several environmental problems caused by emerging toxic substances such as persistent organic pollutants (POPs), endocrine disrupting chemicals (EDCs), and arsenic in various environmental media in Vietnam. Monitoring data reported during the 1990s demonstrated elevated contamination of DDTs in most of these compartments in Vietnam. Studies in frame of the Asia-Pacific Mussel Watch Program revealed that fish, mussels and resident birds from Vietnam contained higher concentrations of DDTs as compared to other countries in region, suggesting the role of Vietnamese environment as a significant emission source of DDT in the Southeast Asian region. The estimated dietary intakes of PCBs and DDTs for Vietnamese were relatively high among Asian developing countries, suggesting potential risk for humans posed by thesechemicals. Widespread contamination of some endocrine active compounds such as alkylphenols and phthalates was observed at various sites along the coasts of northern and middle Vietnam. The presence of significant source of bisphenol-A along Red River estuary was revealed with the concentrations comparable to those reported for developed nations. A case study on seasonal variation of alkylphenols and phthalates in surface water of river delta and estuary of north and middle Vietnam indicated the differences in distribution of these compounds between dry and rainy seasons. Higher concentrations of alkylphenols and phthalates were found in dry season in estuary; while the contrasting pattern was observed in the river delta, showing elevated residues in rainy season. This result suggests the different behavior of alkylphenols and phthalates in river delta and coastal environment. From ecotoxicological perspectives, concentrations of bis-phenol A and di(2-ethylhexyl)phthalates [DEHP] in surface water from some locations in Vietnam exceeded the guideline values for Ecotoxicological Effects and the Environmental Risk Limit, respectively, suggesting potential for toxic implications on aquatic wildlife. Widespread and elevated arsenic contamination was discovered inour recent surveys in groundwater in a large area of suburban areas of Hanoi city, the capital of Vietnam. The most recent investigation in 4 villages showed about more than 50 % of groundwater samples contained As concentrations exceeding 50 g/L (the WHO and Vietnamese standard). In particular, in Son Dong villages, 58 % of samples analyzed contained As concentrations higher than 200 g/L. Good correlations were found in As concentrations in water and hair and urine of peoples in corresponding families, suggesting the chronic exposure to As by people living in As-contaminated ground water areas. In Son Dong village, As levels in hair (mean: 1.7 mg/kg dry wt) and urine (g/g creatinine) exceeding the reference values recommended by WHO, suggesting potential for human risk posed by long term accumulation of As in human body. Future studies should be focused on the time trends of POPs and EDCs in biota in Vietnam in order to predict future trend of contamination and to reveal new clues for understanding possible toxic impacts on aquatic organisms. The issues of arsenic contamination in groundwater and their chronic toxic implications on human health should be systematically investigated in the future.

  • PDF

Effects of Molding Pressure and Sintering Temperature on Properties of Foamed Glass without Blowing Agent

  • Kim, EunSeok;Kim, Kwangbae;Lee, Hyeryeong;Kim, Ikgyu;Song, Ohsung
    • 한국세라믹학회지
    • /
    • 제56권2호
    • /
    • pp.178-183
    • /
    • 2019
  • A process of fabricating the foamed glass that has closed pores with 8 ~ 580 ㎛ sizes without a blowing agent by sintering 10 ㎛ boron-free glass powder composed of CaO, MgO, SO3, Al2O3-83 wt% SiO2 at a molding pressure of 0 ~ 120 MPa and a sintering temperature of 750 ~ 1000℃ was investigated. To analyze the glass transition temperature of glass powder, thermogravimetric analysis-differential thermal analysis (TGA-DTA) method were used. The microstructure and pore size of foamed glass were examined using the optical microscopy and field emission scanning electron microscopy (FE-SEM). For the thermal diffusivity and color of the fabricated samples, a heat flow meter and ultraviolet-visible-near-infrared (UV-VIS-NIR)-colormetry were used, respectively. In the TGA-DTA result, the glass transition temperature of glass powder was confirmed to be 626℃. In the microstructure result, closed pores of 7 ~ 20 ㎛ were formed at 750 ~ 900℃, and they were not affected by the molding pressure and sintering temperature. However, at 1,000℃, when there was 0 MPa molding pressure, closed pores of 580 ㎛ were confirmed, and the pore size decreased as the molding pressure increased. Moreover, at a molding pressure of 30 MPa or higher, closed pores of approximately 400 ㎛ were formed. The porosity showed an increasing trend of smaller molding pressure and larger sintering temperature, and it was controllable in the range of 5.69 ~ 68.45%. In the thermal diffusivity result, there was no change according to the molding pressure, and, by increasing the sintering temperature, up to 0.115 W/m·K could be obtained. The Lab color index (CIE-Lab) results all showed a similar translucent white color regardless of molding pressure and sintering temperature. Therefore, based on the foamed glass without boron and blowing agent, it was confirmed that white foamed glass, which has closed pores of 8 ~ 580 ㎛ and a thermal diffusivity characteristic of 0.115 W/m·K, can be fabricated by changing the molding pressure and sintering temperature.

공공발주자와 민간기업 측면의 건설공사 온실가스 환경비용 영향분석 - 고속도로 포장공종을 중심으로 - (Analyzing Environmental Impacts in Construction Project at Different Ownership - Focus on Express Road Pavement Process -)

  • 장우식;박희대;한승헌;전종서
    • 대한토목학회논문집
    • /
    • 제31권1D호
    • /
    • pp.111-117
    • /
    • 2011
  • 온실가스 감축을 위한 교토의정서 채택 등으로 선진국들은 이산화탄소로 대표되는 온실가스에 대한 구체적 감축목표를 설정하고 이를 달성하기 위한 방안을 모색해 왔다. 최근 우리 정부도 "저탄소 녹색성장"이라는 슬로건을 내걸고 다양한 노력을 경주하고 있다. 이에 자재 생산 및 수송, 건설 및 운영 등의 전 과정에서 많은 양의 온실가스를 배출하는 건설 산업에서도 이산화탄소 배출 등 환경비용을 고려하는 친환경적 산업체계 구축이 어느 때 보다도 필요한 때이다. 따라서 본 연구는 건설공사 수행과정에서 발생하는 온실가스의 배출량을 산출하고, 이를 비용화하여 전체 공사비에 미치는 영향을 분석하고자 하였다. 이를 위해 고속도로 건설공사 사례를 분석하여, 주요 자재 및 장비에서 발생되는 환경부하량을 계산하였다. 그리고 환경부하량 산정의 주체를 공공발주자(정부)와 민간 기업으로 분류하여 각각의 특성을 반영한 환경부하의 비용화 기준을 따로 제시하였다. 그 결과, 공공발주자 측면에서는 실제 공사비 외에 11-16%의 환경적 추가비용이 발생되었으며, 민간기업 입장에서도 실제 공사비 외에 19-22% 정도의 추가비용이 발생되는 것으로 분석되었다. 본 연구는 고속도로의 포장공종에 한정되었고, 온실가스 중 이산화탄소의 배출에만 제한된 한계가 있으나, 토목분야에서 상대적으로 미진했던 환경부하 및 비용화에 대한 사례연구를 수행함으로서, 정부와 민간 기업 입장에서 각각 환경비용을 산정하고 총공사비에 미치는 영향을 계량화할 수 있는 기준을 제시했다는데 의의가 있다.

다양한 샘플링 조건에 따른 선박 배기가스 내 입자상물질의 구조 특성에 관한 실험 연구 (Experimental Study on Structure Characteristics of Particulate Matter emitted from Ship at Various Sampling Conditions)

  • 이원주;장세현;김성윤;강무경;천강우;조권회;윤석훈;최재혁
    • 해양환경안전학회지
    • /
    • 제22권5호
    • /
    • pp.547-553
    • /
    • 2016
  • 선박용 디젤엔진 배기가스에 포함된 입자상물질(PM) 가운데서 블랙카본(BC)은 극지방의 해빙을 촉진시키고 온난화를 유발하는 원인물질로서 큰 주목을 받고 있다. 본 연구에서는 향후 예상되는 PM/BC 배출 규제에 선제적으로 대응하고, 저감기술 개발 및 실증을 위한 기초연구의 일환으로 한국해양대학교 실습선 한바다호를 이용하여 실제 운항 중에 주기관의 배기관 수 포인트에서 PM을 샘플링하여 HR-TEM을 통해 그 구조와 특성을 분석하였다. 또한 배기가스 분석기를 이용하여 운전조건별 배기가스 내 유해물질의 배출 경향을 확인하였다. 분석 결과 엔진에서 배출된 PM의 구조는 구형 입자들의 촘촘하지 않은 체인형 결합으로 이루어져 있으며, 과급기로부터 멀어질수록 온도 저하에 의한 응집이 더 많이 관찰되었고 BC 특유의 graphitic 구조를 잃어가면서 점점 amorphous 구조를 띠는 경향이 나타났다. 또한 배기가스 분석을 통해 엔진 회전수가 증가할수록 배기 내 PM의 농도는 감소할 것으로 예측되었다.

Correlation of Breast Cancer Incidence with the Number of Motor Vehicles and Consumption of Gasoline in Korea

  • Park, Boyoung;Shin, Aesun;Jung-Choi, Kyunghee;Ha, Eunhee;Cheong, Hae-Kwan;Kim, Hyun Jeong;Park, Kyung Hwa;Jang, Sungmi;Moon, Byung-In;Ha, Mina
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권7호
    • /
    • pp.2959-2964
    • /
    • 2014
  • While several reproductive and lifestyle-related factors are already well-known as established risk factors for breast cancer, environmental factors have attracted attention only recently. The objective of the current study was to assess the association between the breast cancer incidences in females, the mortality rate and the number of motor vehicles on the one side and the consumption of gasoline which could work as a major source of air pollution at the other side. The breast cancer incidences and the mortality trends were compared with various indices of westernization like dietary patterns or industrialization with 10 years lag of time. Geographical variations with 10, 15 and 20 years lag of time were assessed between the breast cancer incidence in 2010 and the number of motor vehicles as well as the consumption of gasoline. The upward trend of motor vehicle numbers proved to be comparable to those of breast cancer incidence and mortality. However, the consumption of gasoline started to decrease since the mid-1990s. The geographic distribution of motor vehicle numbers and gasoline consumption in 1990 is in a positive correlation with the breast cancer incidence rates in 2010 and the 20-year lag time ($R^2$ 0.379 with the number of motor vehicles and 0.345 with consumption of gasoline). In a linear relationship between the breast cancer incidences in 2010 and the log transformed number of motor vehicles, the log transformed consumption of gasoline in 2000 also showed a positive relationship ($R^2$ 0.367 with the number of motor vehicles and 0.329 with consumption of gasoline). The results of the current study indicate that there may be a positive relation between the number of vehicles, gasoline consumption and the incidence of breast cancer from the aspects of long-term trends and geographical variation.

CFD 해석 및 PIV 실험을 통한 연료유 스크러버의 노즐 위치선정 (Designation of fuel oil scrubber nozzle positioning using CFD analysis and PIV methods)

  • 김인철;김창구;박성진;조동연;이영호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권7호
    • /
    • pp.773-778
    • /
    • 2015
  • 지구 환경오염문제가 대두되면서 세계 각국에서는 환경오염을 최소화하려는 움직임이 활발히 이루어지고 있다. 국제해사기구(IMO)에서는 해양 대기오염의 상당량이 선박에서 배출되는 배기가스에 의한 것으로 판단하고 있다. 이에 따라서 선진국을 중심으로 선박관련 환경규제 및 선박배기가스 배출기준이 점차적으로 강화되어 가고 있으며, 관련 기술개발이 급격하게 이뤄지고 있다. 본 연구에서는 연료유 스크러버에 사용되는 노즐개발 및 분사노즐의 위치 선정을 위해 실험용 스크러버에서 PIV 실험을 통하여 노즐의 분사속도는 20.1 m/s, 분사각은 $66^{\circ}$을 확인을 하였다. 또한, CFD 해석을 통해 실험값과 비교 하였으며, 이 노즐을 실증 모델 스크러버 사이즈에 적용하여 스크러버에 고르게 분사시키기 위하여 여러 케이스를 적용하여 CFD해석을 진행하여 노즐의 위치를 선정 하였다.

한·중 FTA에 따른 산업부문별 수출 변화와 CO2 배출량 변화 예측 (Forecasting the Effects of Korea-China FTA on Korean Industrial Exports and CO2 Emissions)

  • 하인봉;이광석
    • 자원ㆍ환경경제연구
    • /
    • 제19권1호
    • /
    • pp.81-100
    • /
    • 2010
  • 본고는 한 중 FTA가 체결되어 이행될 경우 대표적인 온실가스인 이산화탄소가 수출 증대를 통해 우리나라에 얼마나 더 많이 배출될 것인가를 분석하고자 하였다. 한 중 FTA 체결에 따른 관세율의 변화가 미래의 산업별 수출에 어떠한 경제적 파급효과를 가져올 것인지를 동태적으로 예측한 후 산업부문별 이산화탄소($CO_2$) 배출변화를 분석하였다. 한국의 대 중국 수출물량 추정을 위해 Bayesian Kalman Filter Vector Auto-Regression(BVAR) 모형을 이용하였다. 이 추정결과를 활용하여 이산화탄소 배출량 변화를 현행체제(Non FTA) 시나리오와 FTA 추진 시나리오를 대비한 결과, 산업 전체를 총합해 보면 2010년 4분기에 이르면 한 중 간 FTA 추진 시나리오(현행 대비 관세율 50% 감소)의 경우가 현행 시나리오보다 수출 증가를 통해 이산화탄소 배출량을 1.96% 증가시킬 것으로 나타났다. 또한 2012년부터 완전 무관세가 실시되는 것을 가정한 시나리오에 따라 2014년 4분기에 이르면 FTA 추진에 따라 이산화탄소 배출량이 현행 시나리오 경우보다 2.06% 증가 배출되는 것으로 예측되었다. 전체적으로 볼 때 한 중 간 FTA 추진에 따른 대 중국 수출액 순증가가 우리 국내에 추가적으로 배출시키는 이산화탄소량은 비교적 크지 않을 것으로 분석되었다.

  • PDF

불투수성 지역의 강우유출수에 대한 비점오염물질의 초기유출현상 분석 (An Analysis of First Flush Phenomenon of Non-point Source Pollution during Rainfall-Runoff Events from Impervious Area)

  • 안태웅;범봉수;김태훈;최이송;오종민
    • 대한환경공학회지
    • /
    • 제35권9호
    • /
    • pp.643-653
    • /
    • 2013
  • 본 연구에서는 불투수성 지역에서 강우시 비점오염원 유출특성을 파악하고, 다양한 해석방법을 통하여 비점오염물질의 초기유출현상을 규명하고자 하였다. 불투수성 지역에서의 강우사상 특성은 강우강도의 영향을 많이 받는 것으로 나타났으며, 강우강도가 크면 초기유출현상이 뚜렷하게 나타나는 것으로 나타났다. 또한 선행무강우일수에 의해서 비점오염물질의 농도차가 큰 것으로 나타나, 이에 대한 대책 마련이 필요할 것으로 판단된다. 비점오염원의 초기유출에 의한 감소율(DR) 평가 결과, 강우시 불투수성 지역에서의 비점오염 유출특성은 건기시 불투수면에 집적되어 있던 비점오염물질이 초기강우에 의해 높은 농도로 유출되는 경향을 보였기 때문에 초기강우로 인한 비점오염물질에 대한 대책을 마련하는 것은 중요하고, 이와 관련하여 비점오염 처리시설에 대한 용량 산정에 대한 평가도 필요할 것으로 판단된다. 초기유출에 의한 감소율(DR) 경향 분석은 비점오염물질에 대하여 감소율(DR) 50%를 기준으로 조사지점별 강우유출시간을 분석하였는데, TSS는 15~60 min으로 나타났으며, 유기물질은 30~90 min으로 나타나는 경향을 보였지만 강우유출이 끝날 때까지도 감소율(DR)이 50% 이하인 특성도 나타났다. 이를 근거로 하여 향후 구조적 BMPs 시설 설계 시 참고자료로 활용할 수 있을 것으로 판단된다.

우리나라 휘발성유기화합물 화학종의 장기 거동 특성 - 광화학오염물질 측정자료 분석 (Characteristics of long-term behavior of VOC species in Korea - PAMS data analysis)

  • 박지훈;강소영;송인호;이동원;조석연
    • 한국대기환경학회지
    • /
    • 제34권1호
    • /
    • pp.56-75
    • /
    • 2018
  • Korean Photochemical Assessment Monitoring Stations (PAMS) have been established since the late 2001 to monitor ambient air concentrations of VOC species, which would enhance understanding photo-chemical formation of ozone and subsequently contribute to developing efficient ozone control strategies. The present study aims at identifying major VOC species and examining their trends by analyzing PAMS monitoring data collected from the year 2006 to 2016. All the 18 PAMS sites operated by the Ministry of Environment were included in the study. PAMS monitored the 56 target VOC species, which are classified into four groups, alkenes, lower alkanes ($C{\leq}3$), higher alkanes ($C{\geq}4$), aromatics. The higher alkanes and aromatics dominated over the lower alkanes and alkenes in the type 2 and 3 PAMS sites except Joongheung site. N-butane was a major alkane species, toluene was a major aromatic species and most of VOCs showed decreasing trends in these sites. On the other hand, only the alkenes showed decreasing trends at the Joongheung site in Yeosu. Major sources of abundant species such as ethane, propane, n-butane, toluene were estimated by analyzing seasonal variations, correlation with other VOC species, and emission profiles. A major source of n-butane was identified as LPG cars, while major sources of toluene varied considerably from one site to another. The lower alkanes were composed of ethane and propane, both of which showed a strong seasonal variation, low in the summer and high in the winter, indicating that a major source might be the heating by gaseous fuels. Ozone formation potentials of VOC species were evaluated by applying MIR and POCP to the measured VOC species concentrations. Toluene contributed the most to total ozone forming potentials followed by m,p-xylene for all the type 2 and 3 PAMS sites except for two sites in Yeosu-Gwangyang. Ethylene and propylene were the first and second contributors to total ozone forming potentials at Joongheung site in Yeosu.

녹색도로 구현을 위한 기술 우선순위 결정에 관한 연구 (A Study on Technology Priorities for Green Highway)

  • 이유화;조원범;김세환
    • 한국도로학회논문집
    • /
    • 제14권3호
    • /
    • pp.151-162
    • /
    • 2012
  • 기후 변화로 인하여 발생하는 자연재해에 대한 뉴스는 더 이상 놀라운 일이 아니다. 우리나라 정부는 온실가스 특히 이산화탄소 저감에 대한 녹색기술 개발에 박차를 가하고 있다. 본 연구는 탄소 저감 및 에너지 효율화를 실현하고, 미래지향적인 녹색도로를 구현하기 위하여, 녹색도로기술을 정의하고, 기술의 우선순위를 결정하는 것을 목적으로 한다. 국내 도로와 교통 전문가 29인에게 AHP기법을 통하여 설문조사를 수행한 후에, Expert Choice 프로그램을 활용하여 선택의 가중치를 분석하였다. 생애주기 변화와 도로 건설 특성을 고려한 1계층 분야와 녹색도로기술을 통하여 달성하고자 하는 목표인 2계층 분야를 구분하여 전문가들의 선택을 분석한 결과, 탄소저감과 에너지 절감을 위해서는 1계층에서는 교통운영 인프라개선, 도로교통정책, 녹색교통 순으로 우선순위 가중치가 높으며, 2계층에서는 녹색도로 관련 기술 R&D투자 및 정책 지원, 녹색교통시설 설계 및 운영, 친환경 도로계획 순으로 우선순위 가중치가 높았다. 추가적으로 전문가들의 기술 우선순위와 국가 재정투자를 비교하기 위하여 2011년까지 5년간의 국토해양부 도로투자를 살펴보았다. 우리나라는 최근 도로건설에 대한 투자보다는 도로의 효율성을 강조하고 이용자의 편의를 도모하는 도로 관리로 전환하고 있는 추세다. 하지만 전문가들이 응답한 기술 목표를 달성하고 최종적으로 녹색도로 구현을 위한 핵심 및 요소기술 개발과 중소기업 기반 도로 산업 육성을 위한 투자는 아직 미진하다고 볼 수 있다. 따라서 녹색도로 건설 구현을 위하여 녹색도로기술 개발 R&D투자를 도모하고 상업화를 지원하는 풍토가 조성되는 것이 필요하다고 판단된다.