• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.45-50
• /
• 2007

Acoustic emission technology is applied to diagnosis the internal leak and operating conditions of the major valves at nuclear power plants. The purpose of this study is to verify availability of the acoustic emission as in-situ diagnosis method. In this study, acoustic emission tests are performed when the pressurized high temperature steam flowed through gate valve(1st stage reheater valve) and glove valve(main steam dump valve) on the normal size of 4 and 8". The valve internal leak diagnosis system for practical field was designed. The acoustic emission method was applied to the valves at the site, and the background noise was measured for the abnormal plant condition. To improve the reliability, a judgment of leak on the system was used various factors which are AE parameters, trend analysis, signal level analysis and RMS(root mean square) analysis of acoustic signal emitted from the valve operating condition internal leak.

• Journal of ILASS-Korea
• /
• v.18 no.1
• /
• pp.16-20
• /
• 2013

The investigation was conducted to analyze the exhaust emission characteristics in diesel engine according to intake air mass flow. In this study, the test diesel engine with a 5,899 cubic centimeter displacement and power of the 260 ps was used to analyze the emission characteristics according to the intake air mass flow. In addition, the test modes were applied by the ND-13 and ETC mode. In order to analyze the emission characteristics, the engine dynamometer with 440 kW and emission gas analyzer (AMA-4000) were utilized. From the experimental results, it is revealed that the NOx and HC emissions in the intake air mass flow of large amount have high levels compared to those in the intake air mass flow of small amount in the ND-13 mode. However, the PM emission was shown the opposite trend in the NOx and HC emission due to the trade-off relation between the NOx and PM.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.2
• /
• pp.96-111
• /
• 2016

Effort to reduce energy consumptions or CO2 emissions is global trend. To follow this trend, spatial studies related to characteristics affecting energy consumptions or CO2 emissions have been conducted, but only with the focus on spatial dependence, not on spatial heterogeneity. The aim of this study is to investigate spatial heterogeneity patterns of CO2 emission based on socio-economic factors, land-use characteristics and traffic infrastructure of Seoul city. Geographically Weighted Regression (GWR) analysis was performed with 423 administrative district data in Seoul. The results suggest that population and employment densities, road density and railway length in most districts are found to have positive impact on the CO2 emissions. Residential and green area densities also have the highest positive impact on CO2 emissions in most districts of Gangnam-gu. The resulting model can be used to identify the spatial patterns of CO2 emissions at district level in Seoul. Eventually it can contribute to local energy policy and planning of metropolitan area.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.38-41
• /
• 2007

The increase of $CO_2$ emission by increasing of fossil fuel usage has been understood a major cause of global warming. The supply of electric energy is heavily dependent on the massive thermal power and nuclear power plant before developing the renewable energy to supply the electric energy stably at a low price. The large and sound forged components of pressure vessel, turbine and generator are widely used in power plant such as wind power, hydroelectric power generation, nuclear power and thermal power plant. This paper is discussed the trend of manufacturing technology for pressure vessel and turbine to satisfy the required condition of utility company. It is also introduced a strategy of forging industry to cope with carbon tax.

• Journal of Environmental Impact Assessment
• /
• v.19 no.1
• /
• pp.59-74
• /
• 2010

The trend of the PM10 concentrations in the Seoul Metropolitan Area (SMA) is reviewed and relative contributions of major contributors (paved road emissions and long-range transport from outside the SMA) are discussed. It was shown that the PM10 concentrations in the SMA have generally decreased except Incheon between 1999 and 2005. Further, it was identified that the difference of the PM10 mass concentration between the roadside stations and urban ambient stations has decreased between 2004 and 2008. Based on the emission estimates, it was suggested that the reduction of resuspension of aerosols on the road is the major reason for that. Based on the modeling results, it was identified that outside effects be about 30% of the ambient PM10 concentration in the SMA. Further research and policy issues to identify major sources of PM10 in the SMA are discussed.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.259-261
• /
• 2012

The effect of fuel composition and coaxial air on the nitrogen oxide emission index was studied in a non-premixed turbulent jet flame. Validity of experimental setup and methodology is checked. The NOx emission trend is similar with previous works in hydrogen flame, but it's not well in $H_2/CO$ flame. Normalized EINOx scaling with modified $S_G$ applying near-field concept was conducted. Experimental data don't collapse single correlation curve, but partially same trend is observed in all cases.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1531-1541
• /
• 2002

The NOx emission characteristics of C$H_4$-Air coflow jet flames were numerically and experimentally investigated. NOx was measured using a chemiluminescent detection and calculated by the parabolic -type equation solver with a detatiled NOx chemistry. The fuel flow rate( $Q_{F}$), the diameter of mixture nozzle and the equivalence rate(Ф) were varied to discuss the EINOx of each flames at the various combustion conditions. The NOx emission index(EINOx) was introduced to quantify the NOx emission from the parametrically varied flames. The results show that Prompt EINOx increases on a logarithmic profile with increasing ${\Phi}$ and keeps nearly constant for the variation of $Q_{F}$. Thermal EINOx reaches the maximum value at around ${\Phi}$ =1.5 and then slowly decrease for ${\Phi}$ >1.5. In addition, Thermal EINOx increases with increasing $Q_{F}$, but nearly indifferent to the variation of the mixture nozzle diameter. Total EINOx also shows a peak at around ${\Phi}$ =1.5, followed by a relatively sharp decrease for 1.5< ${\Phi}$ <2.5 and increase slowly for 2.5 < ${\Phi}$ < $\infty$ The present Total EINOx trend is well explained by a combination of above Thermal and Prompt EINOx trend with the variation of ${\Phi}$ n of ${\Phi}$.

• Journal of Climate Change Research
• /
• v.7 no.4
• /
• pp.513-520
• /
• 2016

Korea's energy consumption has been constantly increasing. Final energy consumption was increased by an annual average of 2.9% compared to 2010. The consumption of all energy sources except for its oil was increased during the same time. While electric demand has increased coal consumption increased rapidly. Therefore, calorfic value and carbon emission factor development can improve the quality of Korea's greenhouse gas inventory. Calorific value is the amount of heat generated while burning coal. Caloric value is one of the most important factors in the development of carbon emission factors. Calorific value is used as the basis for the analysis of the various energy statistics. This study has calculated the other bituminous coal and coking coal's calorfic value by the data received from domestic coal-fired power plants and steel manufacturer. Calorofic value's trend analysis period is the year of 2010~2014. Through analyzing the carbon content it was calculated the carbon emission factor. The bituminous coal and coking coal's uncertainty analysis was performed using a Monte Carlo simulation.

• Journal of Climate Change Research
• /
• v.8 no.2
• /
• pp.145-151
• /
• 2017

Korea's energy consumption has been constantly increasing. Final energy consumption was increased by anannual average of 2.9% compared to 2010. The consumption of all energy sources except for its oil was increased during the same time. While electric demand has increased coal consumption increased rapidly. Therefore, calorfic value and carbon emission factor development can improve the quality of Korea's greenhouse gas inventory. Calorific value is the amount of heat generated while burning coal. Caloric value is one of the most important factors in the development of carbon emission factors. Calorific value is used as the basis for the analysis of the various energy statistics. This study has calculated the sub-bituminous coal's calorfic value by the data received from domestic coal-fired power plants. Calorofic value's trend analysis period is the year of 2011~2015. Through analyzing the carbon content it was calculated the carbon emission factor. The sub-bituminous coal's uncertainty analysis was performed using a Monte Carlo simulation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.567-571
• /
• 2011