• 한국환경보건학회지
• /
• 제22권2호
• /
• pp.124-129
• /
• 1996

In order to investigate the deposition chara.cteristics of water-soluble ionic components in dustfall in Kwangju city, dustfall samples were collected by deposit jar for one year from December 1992 to November 1993. The depositjon amount of dustfall and water-soluble ionic components ($SO_4^{2-}, NO_3^-, Cl^-, NH_4^+, Na^+, Ca^{2+}, Mg^{2+}, K^+$) were measured. The total deposition amount of dustfall was 10.0 ton/$km^2$/month and showed seasonal trend of Summer and Spring > Fall and Winter. The total deposition amounts of water-soluble components showed 2.41 ton/$km^2$/month and seasonal trend of Summer > Fall > Spring > Winter. Deposition amount of $SO_4^{2-}$ was 0.99 ton/$km^2$/month which makes up 41% of water-soluble components. The deposition amounts of dustfall and watersoluble components according to the sampling points were approximately similar to each other. From this result, it can be estimated that the deposition amounts of dustfall and water-soluble components in dustfall were more influenced by the seasonal variation than the regional emission characteristics of pollution source. The content of each ionic component to the deposition amount of water-soluble components showed in order of $SO_4^{2-} > Cl^- > NH_4^+ > Na^+ > Ca^{2+} = K^+ > NO_3^- > Mg^{2+}$ respectively.

• KIEAE Journal
• /
• 제17권5호
• /
• pp.77-86
• /
• 2017

Purpose: Because of the growing concern over fossil fuel use and increasing demand for greenhouse gas emission reduction since the 1990s, the building energy analysis field has produced various types of methods, which are being applied more often and broadly than ever. A lot of research products have been actively proposed in the area of the building energy simulation for over 50 years around the world. However, in the last 20 years, there have been only a few research cases where the trend of building energy analysis is examined, estimated or compared. This research aims to investigate a trend of the building energy analysis by focusing on methodology and characteristics of each method. Method: The research papers addressing the building energy analysis are classified into two types of method: engineering analysis and algorithm estimation. Especially, EPG(Energy Performance Gap), which is the limit both for the existing engineering method and the single algorithm-based estimation method, results from comparing data of two different levels- in other words, real time data and simulation data. Result: When one or more ensemble algorithms are used, more accurate estimations of energy consumption and performance are produced, and thereby improving the problem of energy performance gap.

• 비파괴검사학회지
• /
• 제33권5호
• /
• pp.436-442
• /
• 2013

마찰용접은 축 대칭 단면금속을 용접하는 매우 유용한 결합 과정이다. 본 논문에서는 굴삭기용 호스 니플의 관대관 마찰용접을 시행하여 수송산업 등에 적용 가능성을 제안하고 마찰용접 변수의 기계적 특성을 분석하여 최적화 조건을 결정하고자 하였다. 회전속도, 마찰가열압력 및 가열시간 등 주요 변수를 선정하고 각 매개변수의 세 가지 수준에서 실험을 수행하였다. 한편, 최적의 마찰용접조건을 비파괴적으로 도출하기 위하여 음향방출기법이 적용되었으며 카운터, 이벤트 및 파형과 주파수 스팩트럼 등의 AE 파라미터들을 이용하여 마찰용접시 발생하는 신호를 분석하고자 하였다. 인장시험 결과 최적의 용접 변수는 회전속도 1300 rpm, 마찰가열압력 15 MPa, 마찰가열시간 10초로 나타났으며, 이벤트는 마찰용접된 시험편의 인장강도를 추정하는데 유용한 파라미터가 되었다.

• 한국가구학회지
• /
• 제11권2호
• /
• pp.73-78
• /
• 2000

This study was carried out to measure formaldehyde emission with the passing of two years from plywood, sliver-board and strand-board bonded with urea resins which were made of 6 f/U molar ratios. The urea resins were manufactured by six kinds of formaldehyde/urea molar ratio of 1.0, 1.2, 1.4, 1.6, 1.8 and 2.0. 1. The plywood with molar ratio of 1.0 satisfied the KS F3101 $F_2$ directly after manufacture. The plywood with molar ratio of 1.2 satisfied m 3 days. The plywood with molar ratio of 1.4 satisfied the $F_3$ in 3 days and the $F_2$ in 600 days. And the plywood with molar ratio of 1.8 and 2.0 satisfied the $F_3$ in 365 days, but didn't satisfy the $F_2$ in 730 days. 2. Sliver-board with molar ratio of 1.0 and 1.2 satisfied the KS F3104 $E_2$ right after manufacture. Sliver-board with molar ratio of 1.4 and 1.6 satisfied in 150 and 360 days, respectively. Sliver-board with molar ratio of 1.8 and 2.0 satisfied in 730 days. 3. Strand-board with molar ratio of 1.0 and 1.2 satisfied the KS F3104$ E_2$ directly after manufacture. Strand-board with molar ratio of 1.4 and 1.6 satisfied in 150 days. But Strand-board with molar ratio of 1.8 and 2.0 didn't satisfied in 730 days.

• 한국기후변화학회지
• /
• 제9권4호
• /
• pp.445-452
• /
• 2018

The field of agriculture, forestry, and other land-use (AFOLU) is concerned with greenhouse emissions of agriculture (crop and livestock), as is the field of land-use, land-use change, and forestry (LULUCF). The 1996 IPCC guideline and the 2006 IPCC guideline are used in combination for calculation of greenhouse gas emission from the agricultural sector, and the 2003 IPCC guideline is used for that from the land-use sector. In this research, we analyzed GHG emissions of the cropland sector in AFOLU based on the 2006 IPCC guideline. The results showed that GHG emissions of 1990 was $-504Gg{\cdot}CO_2-eq$, while that of the last year was $2,871Gg{\cdot}CO_2-eq$. Compared with the 2003 methodology, total emissions according to the 2006 IPCC was lower except in 1997 and 2003. This trend is due to difference of analyzed emission sources, lower default values, and global warming potential by the 2006 IPCC. The results are estimated using limited data at the Tier 1 level and the first issue to be solved is the activity data from the land-use change matrix. Although this result should be improved, it can be used as the basis for calculating GHG emissions of the AFOLU sector.

• 한국환경과학회지
• /
• 제27권12호
• /
• pp.1169-1178
• /
• 2018

Two man-made carbon emissions, fossil fuel emissions and land use emissions, have been perturbing naturally occurring global carbon cycle. These emitted carbons will eventually be deposited into the atmosphere, the terrestrial biosphere, the soil, and the ocean. In this study, Simple Global Carbon Model (SGCM) was used to simulate global carbon cycle and to estimate global carbon budget. For the model input, fossil fuel emissions and land use emissions were taken from the literature. Unlike fossil fuel use, land use emissions were highly uncertain. Therefore land use emission inputs were adjusted within an uncertainty range suggested in the literature. Simulated atmospheric $CO_2$ concentrations were well fitted to observations with a standard error of 0.06 ppm. Moreover, simulated carbon budgets in the ocean and terrestrial biosphere were shown to be reasonable compared to the literature values, which have considerable uncertainties. Simulation results show that with increasing fossil fuel emissions, the ratios of carbon partitioning to the atmosphere and the terrestrial biosphere have increased from 42% and 24% in the year 1958 to 50% and 30% in the year 2016 respectively, while that to the ocean has decreased from 34% in the year 1958 to 20% in the year 2016. This finding indicates that if the current emission trend continues, the atmospheric carbon partitioning ratio might be continuously increasing and thereby the atmospheric $CO_2$ concentrations might be increasing much faster. Among the total emissions of 399 gigatons of carbon (GtC) from fossil fuel use and land use during the simulation period (between 1960 and 2016), 189 GtC were reallocated to the atmosphere (47%), 107 GtC to the terrestrial biosphere (27%), and 103GtC to the ocean (26%). The net terrestrial biospheric carbon accumulation (terrestrial biospheric allocations minus land use emissions) showed positive 46 GtC. In other words, the terrestrial biosphere has been accumulating carbon, although land use emission has been depleting carbon in the terrestrial biosphere.

• 한국건축시공학회지
• /
• 제15권1호
• /
• pp.99-105
• /
• 2015

건축물은 전세계 총 에너지 소비 및 온실가스 방출의 1/3 이상을 차지하고 있어 건축물이 환경에 미치는 영향이 크다. 이에 따라 각 국가에서는 1997년 교토의정서에 의해 온실가스 배출량을 감축할 것을 의무화하였으며, 한국도 2014년 건축물 에너지 성능개선 방안을 발표한 바 있다. 본 연구는 에너지 절감이 가능한 친환경 건축물 기술분야의 주요 핵심기술을 소분류로 분류한 후, 한국, 미국, 일본 그리고 유럽에 공개된 특허문헌에 대한 특허동향분석을 수행하였다. 본 연구의 목적은 주로 친환경 건축물의 인증제도 그 자체에만 머무르고 있어서 세부적인 기술현황이나 연구개발방향을 정확하게 설정하지 못한다는 현재 기술의 문제점을 해결함으로써, 향후의 체계적인 R&D 방향제시 및 기술개발방향을 제시하는 것이다.

• 한국건설관리학회논문집
• /
• 제5권6호
• /
• pp.154-161
• /
• 2004

최근 새로운 트랜드로 떠올라 산업전반을 강타하고 있는 웰빙(well-being) 개념이 주택업계에도 활발하게 도입되고 있다. 2000년대 들어 공동주택 구매자들은 안락함을 누리며 건강한 삶을 영위할 수 있는 기능을 보유한 차별화 된 아파트를 선호 하였고 이후 관련업계는 이러한 요구를 반영하여 건강 친환경 개념을 강조한 웰빙 아파트를 시장에 선보이고 있다. 이를 통해 관련업계는 침체된 부동산시장에서 돌파구를 찾고자 하고 있다. 업계측은 설계 및 평면에서 단지조경, 마감재의 차별 화등을 시도하면서 이를 웰빙 아파트라고 부르고 있다 그러나 업계가 주장하고 있는 웰빙 아파트에 대한 개념을 수요자들도 공감하고 있는지와, 실재 이들이 어떤 요소 혹은 기능을 웰빙 이라고 여기는지에 대한 조사는 미흡한 상황이다. 이에 본 연구에서는 향후 부산지역에서 웰빙 아파트를 구매할수 있는 잠재 수요자를 대상으로 설문조사를 실시하여 웰빙 아파트에 대한 전반적인 선호도 및 중요하게 고려하는 요소나 기능에 대한 세부집단별 차이를 분석해 관련업체가 향후 이들 세부집단을 대상으로 하는 표적마케팅 방안을 수립하는데 참조할 수 있도록 한다.

• 한국대기환경학회지
• /
• 제22권6호
• /
• pp.851-862
• /
• 2006

Satellites have been valuable tool for global/regional scale atmospheric environment monitoring as well as emission source detection. In this study, we present the results of application of satellite remote sensing data for air quality forecast in Seoul metropolitan area. AOT (Aerosol Optical Thickness) data from TERRA/MODIS (Moderate Resolution Imaging Spectre-radiometer) satellite were compared to ground based $PM_{10}$ mass concentrations, and used to estimate the possibility of the aerosol forecasting in Seoul metropolitan area. Although correlation coefficient (${\sim}0.37$) between MODIS AOT products and surface $PM_{10}$ concentration data was relatively low, there was good correlation between MODIS AOT and surface PM concentration under certain atmospheric conditions, which supports the feasibility of using the high-resolution MODIS AOT for air quality forecasting. The MODIS AOT data with trajectory forecasts also can provide information on aerosol concentration trend. The success rate of the 24 hour aerosol concentration trend forecast result was about 75% in this study. Finally, application of satellite remote sensing data with ground-based air quality observations could provide promising results for air quality monitoring and more exact trend forecast methodology by high resolution satellite data and verification with long term measurement dataset.

• 융합정보논문지
• /
• 제7권4호
• /
• pp.75-81
• /
• 2017

정보기술의 디자인 트렌드는 시대에 따라 빠르게 변해왔으며, 최근의 정보 디스플레이의 디자인 트렌드는 베젤리스 디스플레이가 대세이다. 베젤리스 또는 에지리스 디스플레이는 휴대폰 디스플레이의 새로운 트렌드로 부상하고 있다. 본 논문에서는 이른바 베젤리스 디스플레이라고 불리는 기기 면적 대비 높은 화면 비율을 갖는 터치패널 디스플레이의 조립 공정에 적합한 차광 테이프를 개발하였다. 차광 테이프는 자외선 경화형 아크릴계 감압성 점착제를 PET 필름 위에 롤투롤 공정으로 코팅하여 제조하였다. 자외선 경화형 감압성 점착제는 톨루엔을 전혀 사용하지 않는 친환경적인 제조 방법으로 합성되었다. 제조된 차광 테이프의 점착력은 자동화된 인장시험기로 분석하였으며, 형상유지 특성인 칙소성은 주사 전자 현미경으로 분석하였다. 그 결과 제조된 차광 테이프는 터치패널 디스플레이의 조립 공정에 적합한 높은 점착력과 우수한 칙소성을 나타내었다. 이러한 기능성 차광 테이프의 개발은 그 동안 차광 테이프의 칙소성 부족으로 인하여 야기되었던 터치 패널 디스플레이 조립 공정의 생산성향상 및 품질안정성 향상에 기여할 것으로 기대된다.