• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.441-445
• /
• 2000

Considering international status of our country as world class ship builder and geographical characteristics encircled by sea in three facets, controlling of air pollutants emission from marine engines becomes more and more important issue in recent days. Implementation of immediate pollutants emission control regulation and standardization of test and certification procedure are required to reduce air pollution from marine engines. But cost increments due to additional equipment of emission control device and development and certification test expenses as well as depreciation of fuel economy should be considered. To satisfy those air pollution reduction and economic requirements, we should make our own interpretation of IMO standard and implementation schedule depending on our country's status. For this purpose we measured NOx emission from small and middle class marine engines to calculate emission factor and total pollutant emission in our country. With the comparison and analysis of other countries emission control regulation we proposed basic data of total emission from marine engine and future emission control standard in our country. According to our estimation, 62% of total NOx emission of marine engines comes from fishing boat and 38% from commercial vessels. The portion of NOx emission from marine engine is 18.6% of whole country NOx emission. Due to the voyage characteristics of middle and large vessel and necessity of international harmonization of marine engine pollutants emission control standard, it is inevitable to adopt IMO standard for middle and large marine engines. But considering technological and cost effect of fishing boat operating in near sea, it is resonable to set a standard within 80% of measured value at the moment and gradually implement the same IMO standard in near future.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.136.2-136.2
• /
• 2011

In this work, we analyzed correlations between life-cycle greenhouse gas (GHG) emissions and life-cycle cost of energy resources. Energy resources studied in this paper include coal, natural gas, nuclear power, hydropower, geothermal energy, wind power, solar thermal energy, and solar photovoltaic energy, and all of them are used to generate electricity. We calculated the mean values, ranges of maximum minus minimum values, and ranges of 90% confidence interval of life-cycle GHG emissions and life-cycle cost of each energy resource. Based on the values, we plotted them in two dimensional graphs to analyze a relationship and characteristics between GHG emissions and cost. Besides, to analyze the technical maturity, the GHG emissions and the range of minimum and maximum values were compared to each other. For the electric generation, energy resources are largely inverse proportional to the GHG emission and the corresponding cost.

• 전기학회논문지
• /
• 제61권4호
• /
• pp.534-541
• /
• 2012

This paper tries to elicit an optimal generation mix of Korea. Two approaches, using the screening curve method and taking advantage of a generation expansion planning tool, WASP-IV, are applied in getting the mix. The data used in this study is based on the 5th basic plan for long-term electricity supply and demand. The Load Duration Curve, that is needed for applying Screening Curve Method(SCM), is made based on the load profile in 2010. In our using SCM, the nuclear plant's operation characteristic, carbon emission cost and spinning reserve are considered. In using WASP-IV to get the adequate generation mix, the base and target demand forecasts in the 5th basic plan are used and the carbon emission cost is also considered. In this paper, It introduces the domestic adequacy generation mix in 2024 though SCM and WASP-IV.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.204-205
• /
• 2018

This paper investigates CO₂ emission and cost analysis of blended concrete which was added with fly ash and slag. Three kinds of blended concrete were studied in this investigation, the first blended concrete was added fly ash replacing part of the cement while the second was added slag, the third was added fly ash and slag. Analysis result display that the blended concrete containing fly ash and slag is the optimal choice while considering economic and CO₂ emissions.

• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.13-18
• /
• 2008

1997년 교토 기후협약이 체결되었고, 세계는 지금 지구온난화 문제로 $CO_2$ 전쟁을 치르고 있다. 우리나라도 2013년부터 기후협약 규제가 거의 확실시 되고 있다. 화석연료의 연소로 대부분의 전력을 생산하는 발전산업은 우리나라 $CO_2$ 대기배출량의 20[%] 이상을 차지하고 있다. 발전소의 화석연료의 소모와 이에 따른 $CO_2$ 대기배출 규제는 갈수록 엄격해 질 전망이며 전력생산단가에 크게 영향을 끼칠 것이다. 본 논문은 화력발전소의 입출력 특성계수를 이용하여 발전출력에 대한 $CO_2$ 대기배출비용 함수를 유도하는 방법과 이를 전력계통의 운용에 반영하는 방안을 제시한다. 모형계통의 시뮬레이션을 통하여 $CO_2$ 배출량과 $CO_2$ 대기배출비용을 감안한 전력 계통 최적운전 연산 사례를 도시하였다.

• 환경정책연구
• /
• 제6권4호
• /
• pp.55-81
• /
• 2007

CGE모형을 이용하여 우리나라를 포함한 OECD 국가와 중국, 브라질 등 18개 국가를 대상으로 다양한 비율의 $CO_2$ 저감량이 할당되는 경우 그에 따라 예상되는 국가별 GDP손실액을 추정하고 그 결과를 이용하여 각국의 $CO_2$ 저감에 따른 총비용곡선, 한계비용곡선, 평균비용곡선의 형태를 비교하였다. 대다수 국가의 총비용곡선, 한계비용곡선 그리고 평균비용곡선은 우상 향하는 형태를 나타내었으나 국가별로 실행가능한 저감영역이 다르고 또 각 함수의 기울기와 절편 등이 다르게 나타났다. 향후 post-kyoto 온실가스감축 의무부담방안 협상 시 온실가스 저감에 따른 각국의 GDP손실액 유형을 고려하여 우리나라와 비슷한 패턴을 가지고 있는 국가들과 공동으로 의무부담방안을 모색하는 것이 필요하다.

• 한국항해항만학회지
• /
• 제35권9호
• /
• pp.777-783
• /
• 2011

Interest about Modal Shift is not being decreased, and it is drawing limelight as green logistics which meets low carbon green growth of National development vision. As an effect of Modal Shift, not only reduction in CO2 emission but also reduction in social cost, logistics cost etc. are being discussed. However, until now research about its practical transformation effect has been scanty. In this study, the actual expenses via CO2 emission, social cost, and logistics cost etc. by road transportation and rail transportation of container cargo with Origin/Destination between Busan-Kyeonggi Area were calculated and we propose beneficial effects when transportation mode is transformed from road to rail with Scenario Planning.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1451-1454
• /
• 2005

We report effects of inorganic binder on the emission properties of CNT paste for low cost and high low-cost and large area field emission devices or displays. Two types of photosensitive carbon nanotube (CNT) paste were formulated by using of glass frit and spin on glass (SOG) as an inorganic binder and investigated their emission properties according to inorganic binders and firing conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1466-1469
• /
• 2005

We report effects of electrical aging on the emission stability of carbon nanotube (CNT) paste for low cost and high low-cost and large area field emission devices or displays. Photosensitive carbon nanotube paste was formulated by using of spin on glass (SOG) as an inorganic binder and investigated emission properties and stability depending on electrical aging condition.

• 한국물환경학회지
• /
• 제23권1호
• /
• pp.131-137
• /
• 2007

Industrial wastewater management guideline and evaluation model of Best Available Technologies for the leather tanning and finishing industry was developed as an economical evaluation model using evaluation of BAT including economical evaluation combined with cost analysis model and cost annualization model in considering of economical factors and non-water environmental factors. It was verified that approximately 10% will be increased annually to modify conventional treatment process ($3,700m^3/d$) of J leather wastewater treatment plant to advanced process of K leather wastewater treatment plant.