• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.459-467
• /
• 2017

An urban railway power substation consists of three thyristor dual converters. Two converters are connected to up and down trolley line to supply the electric energy or feed the regenerative energy back to the distribution. When the two converters break down, the remaining converter is used in an emergency. One thyristor dual converter system (TDCS) manages the energy of two or three railway stations. If the TDCS fails, the trains stop operating. To solve the problem, this paper proposes the three parallel operation control algorithm of thyristor dual converter system using the emergency converter. The broken TDCS can be replaced by the emergency converter in other TDCS. The effectiveness of this proposed control is verified by simulation.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.181-187
• /
• 2006

This paper is proposed to a solar cell power system used in fire emergency equipment. Also it is designed with a high efficiency power converter in order to increase efficiency of power system. The controlling switches used in DC-DC booster chopper and DC-AC inverter are operated with soft switching, which is applied to resonant circuit method to reduce switching loss. The result is that the system gets to high efficiency. In this paper, A detection circuit of maximum power point of solar cell is described in this paper. And the performance evaluations for the photovoltaic power system of high efficiency are examined by the analysis of a new tracking controller with a maximum power $P_{max}$ detection of solar cell.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.125-131
• /
• 2006

The existing X-ray generators are either ones which are settled at fixed places or ones which are movable to sick rum. Movable generators can be very useful according to the circumstances of patients, but there remains a restraint that AC220[V] in the hospitals must be provided. When examining a first-aid patient who stays distant from the hospital or when grouping patients caused by disaster, the services of doctors at emergency centers should be very restrictive. Hence, this study developed a portable digital X-ray power supply unit that are utilizable at the accident spot or in a moving ambulance. By using the nit, the information of patients can be transmitted to the emergency center on the spot and thereby doctors can make a correct diagnosis. The properties of the unit are as follows: First, portable batteries(DCl2[V]) are utilized as electric source for the wit. Second PIC16F84A is utilized as control circuit in order to guarantee considerable reliance and to provide various functions. This portable digital X-ray power supply unit is expected to contribute to the emergency medical service system to be more advanced.

• International Journal of Advanced Culture Technology
• /
• v.5 no.1
• /
• pp.58-63
• /
• 2017

Emergencies and disasters can happen any time without any warning, and things can change and escalate very quickly, and often it is swift and decisive actions that make all the difference. It is a responsibility of the building facility management to ensure that a proven evacuation plan in place to cover various worst scenario to handled automatically inside the facility. To mapping out optimal safe escape routes is a straightforward undertaking, but does not necessarily guarantee residents the highest level of protection. The emergency evacuation navigation approach is a state-of-the-art that designed to evacuate human livings during an emergencies based on real-time decisions using live sensory data with pre-defined optimum path finding algorithm. The poor decision on causalities and guidance may apparently end the evacuation process and cannot then be remedied. This paper propose a cloud connected emergency evacuation system model to react dynamically to changes in the environment in emergency for safest emergency evacuation using IoT based emergency exit sign system. In the previous researches shows that the performance of optimal routing algorithms for evacuation purposes are more sensitive to the initial distribution of evacuees, the occupancy levels, and the type and level of emergency situations. The heuristic-based evacuees routing algorithms have a problem with the choice of certain parameters which causes evacuation process in real-time. Therefore, this paper proposes an evacuee routing algorithm that optimizes evacuation by making using high computational power of cloud servers. The proposed algorithm is evaluated via a cloud-based simulator with different "simulated casualties" are then re-routed using a Dijkstra's algorithm to obtain new safe emergency evacuation paths against guiding evacuees with a predetermined routing algorithm for them to emergency exits. The performance of proposed approach can be iterated as long as corrective action is still possible and give safe evacuation paths and dynamically configure the emergency exit signs to react for real-time instantaneous safe evacuation guidance.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.486-488
• /
• 2000

This paper presents a methodology to evaluate the restoration capability of the feeder and its applications to the system planning and operation in the normal and emergency states. The proposed method is very simple and practical, so its application to the real system operation is expected to increase the system reliability.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.57-59
• /
• 2004

Arc-furnace is one of the large loads in the electric power system. When the arc-furnace operates, it may cause a bus voltage fluctuation in the power system, because it consumes a lot of reactive power. In this paper, we simulated this phenomenon by using a PSAF program with on-site measured arc-furnace load for different amount of cutailment load.

• Korean Journal of Occupational Health Nursing
• /
• v.21 no.2
• /
• pp.164-173
• /
• 2012

Purpose: This study aims to investigate the degree of burnout of 119 rescuers, to determine factors influencing their burnout, and to provide basic data for development of intervention programs to prevent the burnout. Methods: Subjects of this study were all 119 rescuers working at fire stations located in Busan and Gyeongnam. The data were collected from May 1, 2010 to June 30, 2010. The collected data were analyzed with SPSS/WIN 17.0. Results: When the difference in the degree of burnout by general characteristics was investigated, the means of burnout were significantly different depending on age, period of service, position, license, annual salary, desire to work continuously and types of working hours. Job stress, job satisfaction, social support, self efficacy and self esteem showed a statistically significant correlation with burnout. The degree of burnout became higher with more job stress and lower job satisfaction, social support, self efficacy and self esteem. As a significant factor affecting the degree of burnout of 119 rescuers, job stress showed 47.3% of explanatory power. The explanatory power of all of job stress, job satisfaction, self efficacy, types of working hours, annual salary and license was 62% and the power of job stress was the highest. Conclusion: From these results, job stress, job satisfaction and self-efficacy were found to be factors affecting the burnout of 119 rescuers. Therefore, intervention programs to reduce job stress and to improve job satisfaction, social support, self efficacy and self esteem should be developed to lower the degree of burnout of 119 rescuers. In addition, further researches to analyze works of 119 rescuers and legal and institutional strategies to improve their treatment are necessary and supplementary training in various practices by different circumstances based on standardized protocols should be conducted.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4576-4582
• /
• 2023

The Korea retrospective dosimetry (KREDOS)-electron paramagnetic resonance (EPR) group undertook an intercomparison investigation utilizing hydroxyapatite. This analysis involved four institutions: the Korea Institute of Radiological and Medical Sciences, Dongnam Institute of Radiological and Medical Sciences, Korean Association for Radiation Application, and Radiation Health Institute of Korea Hydro & Nuclear Power. Following the irradiation of the hydroxyapatite sample, the recorded build-up was analyzed. To validate the reliability of the EPR dosimetry findings and enhance its operational performance, a hydroxyapatite dose-response curve was plotted and dosimetry was performed for a blind sample. The proficiency of each laboratory was assessed by employing an interlaboratory comparison methodology. This involved a comparative analysis of the measurement results by calculating the relative bias, z-score, and En value. The results submitted by the participating laboratories demonstrated satisfactory ratings for doses of 1.006, 3.999, and 6.993 Gy. Following the second intercomparison, efforts to optimize their hydroxyapatite-EPR dosimetry systems are underway in the participating laboratories. The current assessment of hydroxyapatite dose yielded the foundational data required to establish the parameters of dental dosimetry. In future, the third intercomparison experiment will be conducted for exploring other materials.

• The Journal of Korea Robotics Society
• /
• v.3 no.3
• /
• pp.186-193
• /
• 2008

We propose a novel real-time obstacle avoidance method for rescue robots. This method, named the ELA(Emergency Level Around), permits the detection of unknown obstacles and avoids collisions while simultaneously steering the mobile robot toward safe position. In the ELA, we consider two sensor modules, PSD(Position Sensitive Detector) infrared sensors taking charge of obstacle detection in short distance and LMS(Laser Measurement System) in long distance respectively. Hence if a robot recognizes an obstacle ahead by PSD infrared sensors first, and judges impossibility to overcome the obstacle based on driving mode decision process, the order of priority is transferred to LMS which collects data of radial distance centered on the robot to avoid the confronted obstacle. After gathering radial information, the ELA algorithm estimates emergency level around a robot and generates a polar histogram based on the emergency level to judge where the optimal free space is. Finally, steering angle is determined to guarantee rotation to randomly direction as well as robot width for safe avoidance. Simulation results from wandering in closed local area which includes various obstacles and different conditions demonstrate the power of the ELA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.159-165
• /
• 2017

As increasing the number of the elderly people, various IT-based home systems for the elderly are actively studied. However, while most systems for the elderly focus on systems detecting emergency cases, systems considering energy reduction in the elderly housing are rarely found. In fact, the systems for the elderly housing consumes rather more electric power for their functions. In this paper, a emergency monitoring system including the functions to reduce energy useage is studied and it is implemented. Though the system, we can achieve both of future-oriented functions for the aged and green society, which are emergency monitoring and energy reduction.