• International Journal of Automotive Technology
• /
• 제7권2호
• /
• pp.187-193
• /
• 2006

When emergency evasion during running is required, a driver sometimes causes a vehicle to drift, that is, a condition in which the rear wheels skid due to rapid steering. Under such conditions, the vehicle enters a very unstable state and often becomes uncontrollable. An unstable state of the vehicle induced by rapid steering was simulated and the effect of differential steering assistance was examined. Results indicate that, in emergency evasion while cornering and during which the vehicle begins to drift, unstable behavior like spins can be avoided by differential steering assistance and both the stability and control of the vehicle is improved remarkably. In addition, reduction of overshoot during spin evasion by the differential steering assistance has been shown to enable the vehicle to return to a state of stability in a short time in emergency evasion during straight-line running. Moreover, the effectiveness of differential steering assistance during emergency evasion was confirmed using a driving simulator.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.84-90
• /
• 2022

With the popularization of autonomous driving technology, safety has emerged as a more important criterion. However, there are no assessment protocol or methods for AES (Autonomous Emergency Steering). So, this study proposes AES assessment protocol and scenario corresponding to collision avoidance Car-to-Car scenario of Euro NCAP in order to prepare for obstacles that appear after the emergency steering of LV (Leading Vehicle) avoiding obstacles in front of. Autoware-based autonomous driving stack is developed to test and simulate scenario in CARLA. Using developed stack, it is confirmed that obstacle avoidance is successfully performed in CARLA, and the AES performance of VUT (Vehicle Under Test) is evaluated by applying the proposed assessment protocol and scenario.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.110-116
• /
• 2022

Recently, various studies have been conducted to apply deep learning and AI to various fields of autonomous driving, such as recognition, sensor processing, decision-making, and control. This paper proposes a controller applicable to path following, static obstacle avoidance, and pedestrian avoidance situations by utilizing reinforcement learning in autonomous vehicles. For repetitive driving simulation, a reinforcement learning environment was constructed using virtual environments. After learning path following scenarios, we compared control performance with Pure-Pursuit controllers and Stanley controllers, which are widely used due to their good performance and simplicity. Based on the test case of the KNCAP test and assessment protocol, autonomous emergency steering scenarios and autonomous emergency braking scenarios were created and used for learning. Experimental results from zero collisions demonstrated that the reinforcement learning controller was successful in the stationary obstacle avoidance scenario and pedestrian collision scenario under a given condition.

• Tribology and Lubricants
• /
• 제29권5호
• /
• pp.291-297
• /
• 2013

Hydraulic directional control valves actuated by solenoid are used to control emergency steering in general or hybrid electric commercial vehicles. In this study, a new lightweight hydraulic directional control valve was designed by flow and structural simulation, and was fabricated; the basic operation, pressure differentials, and inner leakage flow were evaluated experimentally. In the results, the new model showed comparable performance with an existing imported valve. New valve was 80% the weight of the existing valve and had few components. Installing this valve on a truck body is easier because of its compactness and small size.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.29-32
• /
• 2013

An aircraft made an emergency landing through the loss of capability controlling steering. A torsion link which is a part of steering apparatus has been adrift from the steering system and the bolt connected to the steering link has fractured. At the same time, the FLIR(Forward Looking Infrared Radar) mounted in front of the steering link has been also damaged. In the early of this investigation, we considered the failure of the FLIR had occurred first, that FLIR hit the steering link and finally the bolt fractured. The fractured section of the bolt has shown a beach mark and a dimple mark as well. The outside of the bolt has shown a large deformation by a heavy load. As a result, we have found out what the cause of the heavy load and the fractures for bolt, link and FLIR have occurred in what order.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.29-38
• /
• 1997

In this paper, brake steering performance of electric-driven special-purpose vehicles is investigated. A 14 DOF model is developed considering nonlinear character- istics of the suspension and tire. Based on the model, cornering performance is analyzed for brake steering, acceleration steering and pivoting, respectively. Simulation results are obtained based on the developed SIMULINK module. This analysis about the non steady state cornering performance is particularly important for armored vehicles because the projected route of the vehicle at emergency should be predicted accuracy.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.113-124
• /
• 2020

Most of the work of construction equipment and agricultural machinery is done in off-road conditions. Autonomous driving required in these conditions uses GPS sensors, and PID controllers to control their speed and position. The hydrostatic steering, which is composed of a PSU, hydraulic hoses, and cylinders, rather than a mechanical coupling is used in these equipments. The PSU plays a key role in hydrostatic steering. Precise control of the position under various conditions requires detailed behavioral analysis of the basic components and operation. Two Gerotor PSU is now a commonly used safer option. The components of the PSU can be divided into mechanical and hydraulic actuating elements by its behavior. Since the system is combined by mechanical and hydraulic elements, the modelings are performed using Amesim, which is one of the most effective for the multi-domain dynamic system analysis. To confirm the validity of the model, input torque and pressures are checked with varying steering speed. The opening and the steering speed of normal and newly designed control valve set is investigated with the effect of centering spring force and friction. Finally, simulation results with fully detailed model with two gerotors are analyzed and compared with simple model.

• 로봇학회논문지
• /
• 제3권3호
• /
• pp.186-193
• /
• 2008

We propose a novel real-time obstacle avoidance method for rescue robots. This method, named the ELA(Emergency Level Around), permits the detection of unknown obstacles and avoids collisions while simultaneously steering the mobile robot toward safe position. In the ELA, we consider two sensor modules, PSD(Position Sensitive Detector) infrared sensors taking charge of obstacle detection in short distance and LMS(Laser Measurement System) in long distance respectively. Hence if a robot recognizes an obstacle ahead by PSD infrared sensors first, and judges impossibility to overcome the obstacle based on driving mode decision process, the order of priority is transferred to LMS which collects data of radial distance centered on the robot to avoid the confronted obstacle. After gathering radial information, the ELA algorithm estimates emergency level around a robot and generates a polar histogram based on the emergency level to judge where the optimal free space is. Finally, steering angle is determined to guarantee rotation to randomly direction as well as robot width for safe avoidance. Simulation results from wandering in closed local area which includes various obstacles and different conditions demonstrate the power of the ELA.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.166-174
• /
• 2004

In urban area narrow commuter vehicles have attracted interest as a possible solution to reduce traffic congestion and parking problems. However, a narrow vehicle has an increased to overturn during hard cornering when compared to conventional vehicles. This tendency can be reduced by tilting it toward the inside of the turn. Two types of automatic tilting control systems which are Direct Tilt Control(DTC) and Steering Tilt Control(STC) have been developed. In this paper as one of the technique to improve the handling performance for the unusual vehicle the control system which blends both the DTC and the STC system is considered. It uses the merits of both the DTC and the STC system. As a control strategy for combination the switching control method is used. Finally, the fact that the unusual vehicle is safe under an emergency situation such as slippery road surface is proved by computer simulation.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1125-1134
• /
• 2004

This paper presents a mathematical model which is about the dynamics of not only a two wheel steering vehicle but a four wheel steering vehicle. A sliding mode ABS control strategy and PID rear wheel control logic are developed to improve the brake and cornering performances, and enhance the stability during emergency maneuvers. The performances of the controllers are evaluated under the various driving road conditions and driving situations. The numerical study shows that the proposed full car model is sufficient to accurately predict the vehicle response. The proposed ABS controller reduces the stopping distance and increases the vehicle stability. The results also prove that the ABS controller can be employed to a four wheel steering vehicle and improves its performance. The four wheel steering vehicle with PID rear wheel controller shows increase of stability when a vehicle speed is high and sharp cornering maneuver when a vehicle speed is low compared to that of a two wheel steer vehicle.