• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1027-1028
• /
• 2006

A case study in low-power PostPC Platform is presented. We introduce an S3C2460 Mobile SoC Processor and Implementation of Embedded Linux on out platform. This Processor is designed to Multimedia & Telecommunication Applications. We focuse on the verification of S3C2460 Processor and operation of Embedded Linux OS on it.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.226-229
• /
• 2006

Strengthening with externally post-tensioned CFRP strips is more effective in increasing load carrying capacity of existing structures as well as reducing crack width and deflection. This study developed concrete embedded anchorages system for externally post-tensioned CFRP strips, and carried out experimental study to verify anchoring performance quantitatively. Through experimental results, anchoring strength of concrete embedded anchorage were quantified into shear strength of anchor bolt, bearing strength of concrete at the front of anchor plate and bond strength between anchor plate and concrete surface. In addition, overall anchoring performances according to combination of each unit force are examined in this study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.97-98
• /
• 2009

In this study, tensile and shear test method for post-installed mechanical anchors embedded in concrete was proposed and the verification test was carried out to evaluate the design strength of anchor.

• Structural Engineering and Mechanics
• /
• v.35 no.2
• /
• pp.191-203
• /
• 2010

To investigate the critical buckling load and post-buckling behavior of an axially loaded pile entirely embedded in soil, the non-linear large deflection differential equation for a pinned pile, based on the Winkler-model and the discretionary distribution function of the foundation coefficient along pile shaft, was established by energy method. Assuming that the deflection function was a power series of some perturbation parameter according to the boundary condition and load in the pile, the non-linear large deflection differential equation was transformed to a series of linear differential equations by using perturbation approach. By taking the perturbation parameter at middle deflection, the higher-order asymptotic solution of load-deflection was then found. Effect of ratios of soil depth to pile length, and ratios of pile stiffness to soil stiffness on the critical buckling load and performance of piles (entirely embedded and partially embedded) after flexural buckling were analyzed. Results show that the buckling load capacity increases as the ratios of pile stiffness to soil stiffness increasing. The pile performance will be more stable when ratios of soil depth to pile length, and soil stiffness to pile stiffness decrease.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.6
• /
• pp.313-319
• /
• 2018

We propose a post-processing algorithm to improve the quality of the RGB image generated by deep learning based colorization from the gray-scale image of an infrared camera. Wavelet fusion is used to generate a new luminance component of the RGB image luminance component from the deep learning model and the luminance component of the infrared camera. PSNR is increased for all experimental images by applying the proposed algorithm to RGB images generated by two deep learning models of SegNet and DCGAN. For the SegNet model, the average PSNR is improved by 1.3906dB at level 1 of the Haar wavelet method. For the DCGAN model, PSNR is improved 0.0759dB on the average at level 5 of the Daubechies wavelet method. It is also confirmed that the edge components are emphasized by the post-processing and the visibility is improved.

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.2
• /
• pp.79-86
• /
• 2015

This study investigated the embedded depth of guardrail posts through 3-D soil material model and carried out evaluation of the dynamic performance of guard rail. In order to calculate for embedded depth of sloping ground, displacement of guardrail posts is analyzed according to the embedded depth of experiment variables. Through the static test of guardrail posts, the maximum deflection was found to decrease the interval. By performing the dynamic test using the Bogie Car, that is confirmed the elastic modulus of the soil occuring the maximum deflection. Guardrail posts is considered to need for further reinforcement in the larger slope than the plains. This study researched about maximum displacement and deviation velocity through dynamic performance of guardrail system and conducted analysis about protection performance evaluation of passenger.

• Journal of Korea Multimedia Society
• /
• v.17 no.4
• /
• pp.413-419
• /
• 2014

In this paper, we develop an automatic coin calculation system by using digital image processing. Existing schemes have the problem that is not able to exclude non-circular shape from the calculation. We propose a method to detect only coins which have circular form by applying the circular Hough transform(CHT). However, the CHT has the drawback that detects multiple circles even for just one coin because of shadow noise, the patterns on coins, and non-circular edge detection. We propose a post processing algorithm to overcome these limitations. The proposed system was implemented and successfully calculated the coin amount in the case that non-circular objects are mixed with coins.

• Coupled systems mechanics
• /
• v.7 no.6
• /
• pp.669-690
• /
• 2018

This paper deals with numerical modeling of dynamic failure phenomena in rate-sensitive brittle and/or ductile materials. To this end, a two-dimensional continuum viscodamage-embedded discontinuity model, which is based on our previous work (see Do et al. 2017), is developed. More specifically, the pre-peak nonlinear and rate-sensitive hardening response of the material behavior, representing the fracture-process zone creation, is described by a rate-dependent continuum damage model. Meanwhile, an embedded displacement discontinuity model is used to formulate the post-peak response, involving the macro-crack creation accompanied by exponential softening. The numerical implementation in the context of the finite element method exploiting the second-order mid-point scheme is discussed in detail. In order to show the performance of the model several numerical examples are included.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11a
• /
• pp.369-372
• /
• 2003

"디지털 가전용 Post-PC"라는 새로운 유형의 정보 단말기를 Post-PC 요소기술(CPU, OS, Middleware)들을 바탕으로 구현하고 그에 대해 설명한다. 개발된 플랫폼은 XScale 기반의 하드웨어에 운영체제는 임베디드 리눅스를 사용하고 윈도우 시스템은 임베디드 QT를 사용하여 설계되었다. 기존에 나와있는 다양한 Post-PC 제품들과 비교하여 차이점 및 장 단점에 대해 논하고 차기 개발될 플랫폼이 경쟁력을 갖출 수 있도록 새로운 방향을 제시한다. Post-PC 표준 개발 플랫폼으로의 활용과 임베디드 응용 소프트웨어의 개발 플랫폼으로의 활용, 기타 응용 제품 개발에 활용될 것으로 기대된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.6
• /
• pp.147-154
• /
• 2008

Experimental study has been performed in order to investigate the behavior of RC beams strengthened with externally unbonded post-tensioned CFRP (Carbon Fiber Reinforced Polymer) strips using embedded or stud-type plate anchorages. Total 10 small-scaled specimens were manufactured with the different post-tensioning level and types of mechanical anchorage as a main test parameter. A control specimen and specimens with simply bonded CFRP strips were included to compare the structural performances of each system. From the test results, it was observed that the specimens strengthened with simply bonded CFRP strips showed debonding failure below 50% of CFRP tensile strength due to premature debonding. On the other hand, all the specimens strengthened with post- tensioned unbonded CFRP strips reached the rupture strength of the CFRP strip. Also, it was observed that the specimens with stud-type anchorage have equivalent strengthening performance compared with embedded-type anchorage.