• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.117-123
• /
• 2011

The low electric power and high efficiency chips are required because of the appearance of smart phones. Also, high-capacity memory chips are needed. e-MMC(embedded Multi-Media Card) for this is defined by JEDEC(Joint Electron Device Engineering Council). The e-MMC memory for research and development is a memory mulit-chip module of 64GB using 16-multilayers of 4GB NAND-flash memory. And it has simplified the chip by using SIP technique. But mulit-chip module generates high heat by higher integration. According to the result of study, whenever semiconductor chip is about 10 $^{\circ}C$ higher than the design temperature it makes the life of the chip shorten more than 50%. Therefore, it is required that we solve the problem of heating value and make the efficiency of e-MMC improved. In this study, geometry of 16-multilayered structure is compared the temperature distribution of four different geometries along the numerical analysis. As a result, it is con finned that a multilayer structure of stair type is more efficient than a multilayer structure of vertical type because a multi-layer structure of stair type is about 9 $^{\circ}C$ lower than a multilayer structure of vertical type.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.2
• /
• pp.59-66
• /
• 2013

In this paper, we proposed an optimal ILP algorithm on memory address code generation for DSP in embedded system. This paper using 0-1 ILP formulations DSP address generation units should minimize the memory variable data layout. We identify the possibility of the memory assignment of variable based on the constraints condition, and register the address code which a variable instructs in the program pointer. If the process sequence of the program is declared to the program pointer, then we apply the auto-in/decrement mode about the address code of the relevant variable. And we minimize the loads on the address registers to optimize the data layout of the variable. In this paper, in order to prove the effectiveness of the proposed algorithm, FICO Xpress-MP Modeling Tools were applied to the benchmark. The result that we apply a benchmark, an optimal memory layout of the proposed algorithm then the general declarative order memory on the address/modify register to reduce the number of loads, and reduced access to the address code. Therefor, we proved to reduce the execution time of programs.

• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.373-382
• /
• 2004

In this paper, a register promotion technique that translates memory accesses to register accesses is presented to enhance embedded software performance. In the proposed method, a source code is profiled to generate a memory trace. From the profiling results, target functions with high dynamic call counts are selected, and the proposed register promotion technique is applied only to the target functions to save the compilation time. The memory trace of the target functions is searched for the memory accesses that result in cycle count reduction when replaced by register accesses, and they are translated to register accesses by modifying the intermediate code and allocating promotion registers. The experiments on MediaBench and DSPstone benchmark programs show that the proposed method increases the performance by 14% and 18% on the average for ARM and MCORE, respectively.

• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.589-598
• /
• 2008

Recently, Mobile Computing Devices are used generally. And Information which is processed by Mobile computing devices is increasing. Because information is digitalizing. So Mobile computing Devices demand an Embedded DBMS for efficient management of information. Moreover Mobile computing Devices demand an efficient storage management in NAND-type flash memory because the NAND-type flash memory is using generally in Mobile computing devices and the NAND-type flash memory is more expensive than the magnetic disks. So that in this paper, we present an efficient Compressed Data Management System for the embedded DBMS that is used in flash memory. This proposed system improve the space utilization and extend a lifetime of a flash memory because it decreases the size of data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.822-828
• /
• 2019

An Augmented Reality(AR) provides virtual information with a real environment, and the processor needs to access the memory for the AR system. However, the processor has the heavy workload as the technology improvement leads to increase the size of data. We need a specific module to reduce the workload to overcome the limitation. In this paper, we propose a Direct Memory Access(DMA) controller displaying image instead of the processor. We implemented the proposed DMA controller on a Field Programmable Gate Array(FPGA) and demonstrated the functionality of the DMA controller based on an Avalon Memory Mapped(Avalon-MM) interface. Also, the DMA controller is fabricated by using Magnachip/Hynix 0.35um CMOS technology and verified the feasibility of the embedded system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.77-82
• /
• 2014

SD memory cards are widely used in portable digital devices, and most of them exploit NAND flash memory as their storage, so that they have a feature of storing users' important data safely with low costs. In case of using NAND flash memory as storage, however, there is no method to store users' data if memory capacity is insufficient when transferring a large volume of data. This paper proposes a virtual SD memory card system. It used a SD memory card device driver to process data requested from a host by exploiting external storage rather than by exploiting flash memory as a memory core for storing data to the SD memory card. For experiment, it used the FPGA-based SD card slave controller IP on the SMC controller with a S3C2450 ARM CPU to test.

• Journal of Korea Multimedia Society
• /
• v.14 no.7
• /
• pp.917-923
• /
• 2011

In this paper, a new prediction based embedded compression (EC) codec algorithm for the JPEG2000 encoder system is proposed to reduce excessive memory requirements. The EC technique can reduce the 50 % memory requirement for intermediate low-frequency coefficients during multiple discrete wavelet transform (DWT) stages compared with direct implementation of the DWT engine of this paper. The LOCO-I predictor and MAP are widely used in many lossless picture compression codec. The proposed EC algorithm use these predictor which are very simple but surprisingly effective. The predictive EC scheme adopts a forward adaptive quantization and fixed length coding to encoding the prediction error. Simulation results show that our LOCO-I and MAP based EC codecs present only PSNR degradation of 0.48 and 0.26 dB in average, respectively. The proposed algorithm improves the average PSNR by 1.39 dB compared to the previous work in [9].

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.301-307
• /
• 2021

In addition to the revival of the Internet of Things, embedded systems, which are at the core of the Internet of Things, require intelligent control as things change. Embedded systems, however, are heavily constrained by resources such as hardware, memory, time and power. When changes are needed to firmware in an embedded system, flash Memory must be initialized and the entire firmware must be uploaded again. Therefore, it is time- and energy-efficient in that areas that do not need to be modified must also be initialized and rewritten. In this paper, we propose how to upload firmware in installments to each sector of flash memory so that only firmware can be replace the firmware in the parts that need to be modified when the firmware needs to be modified. In this paper, the proposed method was evaluated using real target board, and as a result, the time was reduced by about half.

• The KIPS Transactions:PartA
• /
• v.12A no.7 s.97
• /
• pp.621-626
• /
• 2005

Recently, flash memory is widely used in various embedded applications since it has many advantages in terms of non-volatility, fast access speed, shock resistance, and low power consumption. However, it requires a software layer called FTL(Flash Translation Layer) due to its hardware characteristics. We present a new FTL algorithm named LSTAFF(Large State Transition Applied Fast flash Translation Layer) which is designed for large block flash memory The presented LSTAFF is adjusted to flash memory with pages which are larger than operating system data sector sizes and we provide performance results based on our implementation of LSTAFF and previous FTL algorithms using a flash simulator.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.3
• /
• pp.185-192
• /
• 2017

Due to the characteristics of low power, high durability and high density, NAND flash memory is being heavily used in various type of devices such as USB, SD card, smart phone and SSD. On the other hand, because of another characteristic of flash cell with the limited number of program/erase cycles, NAND flash memory has a short lifetime compared to other storage devices. To overcome the lifetime problem, many researches related to the wear leveling have been conducted. This paper presents a method called a TCB (Tracking Cold Blocks) using more reinforced constraint conditions when classifying cold blocks than previous works. TCB presented in this paper keeps a MCT (Migrated Cold block Table) to manage the enhanced classification process of cold blocks, with which unnecessary migrations of pages can be reduced much more. Through the experiments, we show that TCB reduces the overhead of wear leveling by about 30% and increases the lifetime up to about 60% compared to BET and BST.