• 제목/요약/키워드: Embedded internet system

검색결과 419건 처리시간 0.027초

웹기반 원격 검.교정 시스템을 위한 임베디드 네트워크 모듈 설계에 대한 연구 (A study on The Design of Embedded Network Module for Web-based Remote Verification and proofreading)

  • 김민근;이상훈;이혁재
    • 한국정보통신학회논문지
    • /
    • 제11권6호
    • /
    • pp.1077-1082
    • /
    • 2007
  • 디지털 계측기를 인터넷에 접속하여 원격지에서 검 교정을 하기 위해서는 계측기의 CPU 사용률이 많은 일반 서버와는 다른 임베디드 운영체제를 이용한 고속 전용서버가 필요하다. 본 연구는 웹 기반 원격 검 교정 시스템을 위한 고속 네트워크 모듈을 구현하는 목적이며 인터넷을 통해 디지털 계측기를 원격으로 검 교정을 하고, 고속 네트워킹을 위해 TCP/IP Offload Engine 처리와 임베디드 TCP/IP 스택인 LwIP를 개선하였다.

내장형 네트워크 프로세서의 설계 및 구현 (Design and implementation of an Embedded Network Processor)

  • 정진우;김성철
    • 한국정보통신학회논문지
    • /
    • 제9권6호
    • /
    • pp.1211-1217
    • /
    • 2005
  • Embedded system은 소수의 System-On-Chip (SOC)으로 대부분의 기능이 구현되어지는 추세이며, 이러한 SOC의 구조는 대체로 RISC 기반의 내장 마이크로프로세서를 중심으로 발전해 왔다. 하지만 RISC 기반의 ARM, MIPS등의 범용 프로세서들은 점차 그 필요성이 커지고 있는 네트워크 기능과 멀티미디어 처리 기능 등에 대해서는 많은 고려 없이 설계된 프로세서들이다. 소규모 사업자 및 개인 사용자를 위한 네트워크 기기의 경우는 가격대비 성능이 우수한 제품이 시장을 차지하는데 유리하므로, 지금까지 대부분의 경우에서 전용 하드웨어를 사용하지 않고, PHY와 MAC layer 일부의 기본적인 기능을 제외한 나머지 네트워크 기능을 모두 상기한 내장 마이크로프로세서로 처리하고 있다. VDSL, FTTH과 같이 고속 인터넷을 가능하게 하는 기술이 발전함에 따라, 기존의 범용 프로세서에 기반을 둔 네트워크 기기는 빠른 속도로 그 성능의 한계에 다다르고 있다. 이는 단순히 프로세서의 동작 속도를 높이는 것으로 해결할 수 있는 문제가 아닌 것으로 보이며, 네트워크 프로토콜의 처리에 최적화 되어 있지 않은 범용 프로세서의 사용에 근본적인 문제점이 있다고 하겠다. 본 연구를 통하여 네트워크 기능 수행에 효율적인 네트워크 프로세서를 설계하고 이를 Home gateway용 SOC에 내장하고 성능을 측정하여 그 상용화 가능성을 타진한다.

불규칙한 대상 시스템 제어를 위하여 부분 펌웨어 업데이트 기법을 이용한 저전력 변성적 MCU (Low-Power Metamorphic MCU using Partial Firmware Update Method for Irregular Target Systems Control)

  • 백종헌;정지웅;김민성;권지수;박대진
    • 한국정보통신학회논문지
    • /
    • 제25권2호
    • /
    • pp.301-307
    • /
    • 2021
  • 사물인터넷의 부흥과 더불어, 사물인터넷의 핵심인 임베디드 시스템은 상황의 변화에 따른 지능적 제어 능력이 요구되고 있다. 하지만 임베디드 시스템은 하드웨어, 메모리, 시간, 전력 등 자원의 제약이 많다. 이때, 임베디드 시스템에서 펌웨어에 변경이 필요할 때는 플래시 메모리를 초기화하고 다시 전체 펌웨어를 업로드 해야 한다. 따라서, 수정의 필요성이 없는 부분도 초기화하고 다시 작성해야 한다는 점에서 시간 및 에너지적으로 비효율적이다. 본 논문에서는 플래시 메모리 각 섹터에 펌웨어를 분할하여 펌웨어의 수정이 필요할 때 수정이 필요한 부분의 섹터만을 교체하는 방법을 제안한다. 본 논문에서는 실제 타겟 보드를 사용하여 제안하는 방법을 검증하였고, 그 결과 약 절반의 시간을 단축할 수 있었다.

NDFT-based Image Steganographic Scheme with Discrimination of Tampers

  • Wang, Hongxia;Fan, Mingquan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제5권12호
    • /
    • pp.2340-2354
    • /
    • 2011
  • A new and secure image steganographic scheme based on nonuniform discrete Fourier transform (NDFT) is proposed in this paper. First, the chaotic system is introduced to select embedding points randomly in NDFT domain suitable range, and NDFT is implemented on every non-overlapping block of eight consecutive pixels. Second, the secret messages are scrambled by chaotic systems, and embedded into frequency coefficients by quantization method. The stego-image is obtained by inverse NDFT (INDFT). Besides, in order to discriminate tampers, the low frequency wavelet coefficients of 7 most significant bits (MSBs) of the stego-image are converted into the binary sequence after nonuniform scalar quantization. Then the obtained binary sequence is scrambled by the chaotic systems, and embedded into the least significant bit (LSB) of the stego-image. Finally, the watermarked stego-image can be obtained by a new improved LSB steganographic method. The embedded secret messages can be extracted from the watermarked stego-image without the original cover image. Experimental results show the validity of the proposed scheme, and dual statistics attacks are also conducted to indicate the security.

Self-adaptive testing to determine sample size for flash memory solutions

  • Byun, Chul-Hoon;Jeon, Chang-Kyun;Lee, Taek;In, Hoh Peter
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권6호
    • /
    • pp.2139-2151
    • /
    • 2014
  • Embedded system testing, especially long-term reliability testing, of flash memory solutions such as embedded multi-media card, secure digital card and solid-state drive involves strategic decision making related to test sample size to achieve high test coverage. The test sample size is the number of flash memory devices used in a test. Earlier, there were physical limitations on the testing period and the number of test devices that could be used. Hence, decisions regarding the sample size depended on the experience of human testers owing to the absence of well-defined standards. Moreover, a lack of understanding of the importance of the sample size resulted in field defects due to unexpected user scenarios. In worst cases, users finally detected these defects after several years. In this paper, we propose that a large number of potential field defects can be detected if an adequately large test sample size is used to target weak features during long-term reliability testing of flash memory solutions. In general, a larger test sample size yields better results. However, owing to the limited availability of physical resources, there is a limit on the test sample size that can be used. In this paper, we address this problem by proposing a self-adaptive reliability testing scheme to decide the sample size for effective long-term reliability testing.

웹 2.0을 위한 임베디드 Open API 서비스 플랫폼 설계 (Open API service platform designed for embedded)

  • 양문석;노영식;변지웅;차지윤;박상열;변영철
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
    • /
    • pp.587-590
    • /
    • 2008
  • 웹 2.0은 정보의 개방을 통해 인터넷 사용자들 간의 정보 공유와 참여를 이끌어내고 이를 통해 정보의 가치를 지속적으로 증대시키는 것으로 누구든지 웹에서 제공하는 각종 데이터를 활용하여 다양한 서비스를 생산할 수 있는 플랫폼으로서의 웹(Web as Platform)환경을 의미한다. 이에 본 논문에서는 유비쿼터스 컴퓨팅을 실현하기 위해 도처에 설치되어 있는 임베디드 컴퓨터로부터 정보 및 서비스를 받을 수 있도록 임베디드 환경 지원을 위한 웹 기술을 연구한다. 즉, 웹 2.0의 트랜드인 공유와 개방을 지원하기 위해 임베디드 시스템에 탑재되어 실시간으로 다양한 정보 및 서비스를 다수의 인터넷 사용자에게 제공할 수 있는 Open API 서비스를 제공하는 플랫폼을 설계한다.

  • PDF

유비쿼터스 환경하에서의 암호화 모듈이 내장된 네트워크 게이트웨이의 분석 (Analyses of Embedded Network Gateway under Ubiquitous Surroundings)

  • 김정태
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2008년도 추계종합학술대회 B
    • /
    • pp.755-758
    • /
    • 2008
  • As the commercial use of the Internet becomes com- mon and the demand for mobile computing through the Internet is emerging, it is necessary to construct a secure mobile environment. This paper proposes an approach with IP layer security and mobility support to meet this challenge. To evaluate our approach, we are developing a security and motility supported system.

  • PDF

보안 및 효율성을 고려한 관광 예약 정보 시스템 (Tourism Information Reservation System considering the Security and Efficiency)

  • 김태경
    • 디지털산업정보학회논문지
    • /
    • 제11권2호
    • /
    • pp.67-72
    • /
    • 2015
  • As new Information technology such as IoT develops rapidly, a lot of changes are occurred in our lives. The Internet of Things is the network of physical objects or things embedded with electronics, software, sensors and connectivity to enable it to achieve greater value and service by exchanging data with the manufacturer, operator and/or other connected devices. This change is also applied to tourism industry. These days many people make a tour reservation using the internet. But it is required to consider the efficiency and security of tour reservation system. In this paper, we suggest a tour reservation system. First, we describe the computer reservation system, hotel reservation system and reservation system. Second, we perform the modeling of general reservation system and suggested reservation system. Third, performance evaluation is carried out with respect to efficiency and security. The results show that the suggested reservation system has a better performance than a general reservation system. At last we described the results and future works.

IoT 디바이스를 이용한 클라우드 플랫폼 기반의 실시간 공장 모니터링 시스템 개발 (A Development of Real-time Monitoring System in Industrial Factory Based on Cloud Platform Using IoT Device)

  • 박건수;트란 트렁 틴;당 반 치엔;길기종;신용빈;최재원;김종욱
    • 대한임베디드공학회논문지
    • /
    • 제13권1호
    • /
    • pp.25-32
    • /
    • 2018
  • In this paper, we present a proposed monitoring system for smart factories with several aspects, including information gathering, analysis, control, and display that relate to concurrently operation processes in the factory area. This paper proposes a monitoring and management system for industrial automation. In particular, it uses an Internet of Thing (IoT) device with a data protocol unit to convert the industrial protocols and transfer the information on various parameters. In the case of data communication, the proposed monitoring system is designed to support users to remotely manage with the cloud server by implementing conversion between Modbus RTU and Modbus TCP of protocol communications. The proposed communication technique has been verified by experiments.

디지털 인터넷 라디오 수신기 구현에 대한 연구 (The Study on Development of a Digital Internet Radio Receiver)

  • 박인규
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제12권2호
    • /
    • pp.102-110
    • /
    • 2006
  • 본 논문에서는 인터넷과 연결되어 사용되는 일반 PC가 아닌 소형의 임베디드 인터넷 라디오수신 단말기의 구현에 대하여 논의한다. 이러한 시스템의 표준이 아직 정하여 있지 않으며 알고리즘 또한 비공개 상태이다. 따라서 PC의 인터넷 라디오 수신 방식을 분석하여 끊김이 없는 고음질의 임베디드 인터넷 라디오 시스템을 구현을 위하여 여러 업체의 PC 인터넷 수신 알고리즘은 분석하고 하드웨어는 자체 개발하였다. 본 인터넷 라디오 시스템은 실시간 인터넷 라디오의 멀티스트리밍 기능, 임베디드 프로세서, 플래쉬 메모리, TCP/IP 인터훼이스, MP3 디코더 등으로 구성되어있다.