• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.282-290
• /
• 2014

본 논문은 1인승 전기차량의 임베디드 전동 제어장치 설계를 제안하였다. 제안된 임베디드 장치는 PIC18F8720 프로세서, 16Mb flash ROM, 32Mb SDRAM과 신호처리회로로 설계되었다. 제안된 1인승 전기차량은 4KW 인휠 BLDCM, $180^{\circ}$ 도통 공간 벡터제어 3상 전압형 인버터, PID 속도제어기와 전동제어 장치와 임베디드 제어장치로 구성된다. 이 1인승 전기차량은 역 3륜 형태의 기계적인 구조를 가지고 있으며, 인휠 BLDCM과 틸팅 기능을 가지는 조향 메카니즘이 적용되었다. 또한 제안된 임베디드 전동제어장치의 성능은 PEV에 대한 Lab 실험과 도로 주행시험을 통하여 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제14권3호
• /
• pp.301-306
• /
• 2008

Drivers are becoming more fatigued and uncomfortable with increase in traffic density, and this condition can lead to slower reaction time. Consequently, they may face the danger of traffic accidents due to their inability to cope with frequent gear shifting. To reduce this risk, some drivers prefer automatic transmission (AT) over manual transmission (MT). The AT offers more superior drivability and less shifting shock than the MT; therefore, the AT market share has been increasing. The AT is controlled by an electronic control unit (ECU), which provides better shifting performance. The transmission control unit (TCU) is a higher-value-added product, so the companies that have advanced technologies end to evade technology transfer. With more cars gradually using the ECU, the TCU is expected to be faster and more efficient for organic communication and arithmetic processing between the control systems than the l6-bit controller. In this paper, the model of an automatic transmission vehicle using MATLAB/Simulink is developed for the Hardware in-the-Loop (HIL) simulation with a 32-bit embedded system, and also the AT control logic for shifting is developed by using MATLAB/Simulink. The developed AT control logic, transformed automatically by real time workshop toolbox, is loaded to a 32-bit embedded system platform based on Freescale's MPC565. With both vehicle model and 32-bit embedded system platform, we make the HIL simulation system and HIL simulation of AT based on real time operating system (RTOS) is performed. According to the simulation results, the developed HIL simulator will be used for the performance test of embedded system for AT with low cost and effort.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권11호
• /
• pp.521-527
• /
• 2002

The Hemodialysis system is the device for the patients who have suffered from end stage renal failure as the kidney which removes the waste products in a human body. The existing hemodialysis is based on a 8-bit micro-controller and it is not a touch-screen type but a manual type. This paper is focused on hemodialysis system based on high control and expension embedded system. The whole system consists of main control unit and sub control unit(dialysis control unit, blood control unit, monitoring control unit, networking unit). The dialysis control unit, blood control unit, monitoring control unit are processed by 3 microcontrollers and network unit is for monitoring a renal failure patient's condition. For the evaluation of the system performance, the saline was pured into blood unit and then water removal rate, conductivity and temperature of hemodialysis liquid were measured 10 times in an each state suing the UF pump in the fluid unit varing the quantity of saline to 1000cc, 2000cc, 3000cc and 4000cc. As a result, the rates of water removal are 98.6% in condition of 000cc saline, 96.9% in 2000cc, 98.9% in 3000cc and 98.3% in 4000cc. The conductivities of hemodialysis liquid are 99.6% in the first to third condition and 99.7% in the forth condition. The temperatures of hemodialysis liquid are 99.8% in the first to third condition and 99.6% in th forth condition.

• 대한임베디드공학회논문지
• /
• 제8권3호
• /
• pp.129-136
• /
• 2013

In this paper, a motion control system based on 2-axis gimbal system is designed and implemented to drive a high speed and precision. The proposed system consists of the RS-422 interface, 2-axis gimbal platform, servo control unit integrated with a high speed DSP chip-set, servo amplifier unit, potentiometer sensor unit, and resolver sensor unit. The servo control unit using the high speed DSP firmware is designed to get a fast response without an overshoot with step input and a RMS error of low probability with ramp input. The servo amplifier unit using a voltage control is designed to resolve the zero-crossing distortion for precise motion. To verify the performance and stability of the implemented system, experiments are performed through a measurement of the time and frequency domain response in a laboratory environment by using a PXI(PCI eXtentions for Instrumentation).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2223-2231
• /
• 2010

최근 자동차, 철도, 선박, 항공기 등 교통수단의 핵심 장치가 CPU가 들어 있는 컴퓨터 제어장치로 전환되어 가고 있는 상황이다. 자동차 사고사례 중 상당 부분의 원인으로 컴퓨터 제어장치에 탑재된 내장형 소프트웨어의 결함이라고 분석한 보고서가 발표되고 있다. 내장형 탑재 소프트웨어에 대하여 결함 제거를 위한 시험이 충분하지 못한데서 문제가 있을 수 있다. 결국 이러한 내장형 소프트웨어의 시험 기준으로 안전성 평가 기준을 철저히 적용하고 이에 적합한 단위테스트 절차를 구축하는 것이 필요하다. 본 논문은 안전성평가 기준에 적합한 내장형 탑재 소프트웨어에 대한 단위테스트 절차에 대한 방안을 제시하는데 그 목적이 있다. 내장형 탑재 소프트웨어에 대한 테스트에는 단위 테스트, 통합테스트, 시스템테스트 등이 있으며, 이중 가장 많은 결함을 발견하는 것은 단위 테스트이다. 본 논문에서는 테스트계획, 테스트절차, 테스트케이스, 테스트시나리오, 테스트 도구, 재테스트 기준 등에 대한 효과적인 단위테스트 준비 과정과 단위테스트를 수행하면서 발생하는 업무, 즉 결함식별, 결함분류, 결함분석, 결함원인, 결함조치 및 확인, 재테스트 실시, 테스트보고 등의 활동을 체계적으로 구축하는 방안을 제시한다. 또한 개발된 내장형 탑재 소프트웨어의 프로그램 소스를 일일이 눈으로 검사하여 결함을 발견하기란 쉽지 않다. 안전성평가 기준이 내장된 테스트 도구를 활용함으로써 내장형 탑재 소프트웨어 단위테스트의 작업시간을 줄이고 결함발견 및 원인분석에 대한 자동화된 보고서를 얻음으로써 테스트 생산성 및 소스코드의 품질 향상을 달성할 수 있는 방안도 아울러 제시한다.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1678-1688
• /
• 2016

This paper presents a capacitive power transfer (CPT) system using a Class-E resonant inverter. A Class-E resonant inverter is chosen because of its ability to perform DC-to-AC inversion efficiently while significantly reducing switching losses. The proposed CPT system consists of an efficient Class-E resonant inverter and capacitive coupling formed by two flat rectangular transmitter and receiver plates. To understand CPT behavior, we study the effects of various coupling distances on output power performance. The proposed design is verified through lab experiments with a nominal operating frequency of 1 MHz and 0.25 mm coupling gap. An efficiency of 96.3% is achieved. A simple frequency tracking unit is also proposed to tune the operating frequency in response to changes in the coupling gap. With this resonant frequency tracking unit, the efficiency of the proposed CPT system can be maintained within 96.3%-91% for the coupling gap range of 0.25-2 mm.

• 제어로봇시스템학회논문지
• /
• 제19권6호
• /
• pp.520-526
• /
• 2013

This study presents the unit control of a PC (Personal Computer) program using multiple smartphones based on ad hoc communication. A design of the data packet that multiple smartphones send to a computer, and a framework that manages and controls the unit in a computer after analyzing the data packet, are proposed. As a result, multiple users are able to control their own units using their smartphones while seeing the monitor connected to a computer. In other words, multiple users can share the same game in a computer or control their units embedded in a system using their smartphones. An experimental result shows that a racing game in a PC can be realized by the proposed communication interface, where four iPhones are used to control their units in a computer. Thus, the proposed framework can be effectively used for unit control in a PC using multiple smartphones.

• 대한임베디드공학회논문지
• /
• 제17권6호
• /
• pp.375-382
• /
• 2022

This paper proposes a multi-core cooperative computing structure considering the heterogeneous features of automotive embedded on-chip software. The automotive embedded software has the heterogeneous execution flow properties for various hardware drives. Software developed with a homogeneous execution flow without considering these properties will incur inefficient overhead due to core latency and load. The proposed method was evaluated on an target board on which a automotive MCU (micro-controller unit) with built-in multi-cores was mounted. We demonstrate an overhead reduction when software including common embedded system tasks, such as ADC sampling, DSP operations, and communication interfaces, are implemented in a heterogeneous execution flow. When we used the proposed method, embedded software was able to take advantage of idle states that occur between heterogeneous tasks to make efficient use of the resources on the board. As a result of the experiments, the power consumption of the board decreased by 42.11% compared to the baseline. Furthermore, the time required to process the same amount of sampling data was reduced by 27.09%. Experimental results validate the efficiency of the proposed multi-core cooperative heterogeneous embedded software execution technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2380-2382
• /
• 2004

In this paper, Web server is built up using PXA255, 32bit RISC processor with porting Embedded Linux and GoAhead, HTTP(Hyper Text Transfer Protocol) web server, and the system with can monitor and control the environment and condition for AICC(Automatic Intelligent Cruise Control) is realized. For sending the operation condition and change of vehicle the desired data is derived by interacting ECU(Electric Control Unit) and Embedded system and the rpm of engine is controlled by step motor connected to throttle value.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.67-74
• /
• 2009

본 연구에서는 임베디드 시스템과 지그비(Zigbee) 무선통신을 기반으로 지능형 자동차를 위한 모니터링 및 제어가 가능한 임베디드 웹서버를 구축하였다. 자동차의 모든 정보를 담고있는 ECU(Electronic Control Unit)에 주제어기와 임베디드 시스템을 인터페이스 시켜 자동차의 운행정보를 모니터링하고, 자동차의 내, 외부에 추가된 센서신호는 지그비 통신을 이용해 임베디드 시스템에 전달하도록 하였다. 임베디드 시스템을 이용해 웹서버를 구축했기 때문에 개인용 컴퓨터 및 모바일 기기를 이용하여 차량에 접속할 수 있으며, 자동차의 상태를 실시간 감지하고 제어할 수 있다.