• Journal of Korea Multimedia Society
• /
• v.4 no.1
• /
• pp.82-90
• /
• 2001

Genetic Algorithm(GA) has known as a method of solving NP problem in various applications. Since a major drawback of the GA is that it needs a long computation time, the hardware implementation of Genetic Algorithm is focused on in recent studies. This paper proposes a new type of embedded one chip computer fort Hardware Implementation of Genetic Algorithm. The proposed embedded one chip computer consists of 16 Bit CPU care and hardware of genetic algorithm. In contrast to conventional hardware oriented GA which is dependent on main computer in the process of GA, the proposed embedded one chip computer is independent on main computer. Conventional hardware GA uses the fixed length of chromosome but the proposed embedded one chip computer uses the variable length of chromosome by employing the efficient 16 bit Pipeline Unit. Experimental results show that the proposed one chip computer is applicable to the design of evolvable hardware for Random NRZ bit synchronization circuit.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.53-58
• /
• 2008

In this study, we fabricated embedded IC (Double Pole Double throw switch chip) polymer substrate and evaluate it for 2.4 GHz WiFi application. The switch chips were laminated using FR4 and ABF(Ajinomoto build up film) as dielectric layer. The embedded DPDT chip substrate were interconnected by laser via and Cu pattern plating process. DSC(Differenntial Scanning Calorimetry) analysis and SEM image was employed to calculate the amount of curing and examine surface roughness for optimization of chip embedding process. ABF showed maximum peel strength with Cu layer when the procuring was $80\sim90%$ completed and DPDT chip was laminated in a polymer substrate without void. An embedded chip substrate and wire-bonded chip on substrate were designed and fabricated. The characteristics of two modules were measured by s-parameters (S11; return loss and S21; insertion loss). Insertion loss is less than 0.55 dB in two presented embedded chip board and wire-bonded chip board. Return loss of an embedded chip board is better than 25 dB up to 6 GHz frequency range, whereas return loss of wire-bonding chip board is worse than 20 dB above 2.4 GHz frequency.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.29-36
• /
• 2004

A flexible packaging scheme, which includes chip packaging, has been developed using a thinned silicon chip. Mechanical characteristics of thinned silicon chips are examined by bending tests and finite element analysis. Thinned silicon chips (t<30 $\mu\textrm{m}$) are fabricated by chemical etching process to avoid possible surface damages on them. And the chips are stacked directly on $Kapton^{Kapton}$film by thermal compressive bonding. The low height difference between the thinned silicon chip and $Kapton^{Kapton}$film allows electroplating for electrical interconnection method. Because the 'Chip' is embedded in the flexible substrate, higher packaging density and wearability can be achieved by maximized usable packaging area.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.2
• /
• pp.103-111
• /
• 2019

The IoT-driven large-scaled systems consist of connected things with on-chip executable embedded software. These light-weighted embedded things have limited hardware space, especially small size of on-chip flash memory. In addition, on-chip embedded software in flash memory is not easy to update in runtime to equip with latest services in IoT-driven applications. It is becoming important to develop light-weighted IoT devices with various software in the limited on-chip flash memory. The remote instruction execution in cloud via IoT connectivity enables to provide high performance software execution with unlimited software instruction in cloud and low-power streaming of instruction execution in IoT edge devices. In this paper, we propose a Cloud-IoT asymmetric structure for providing high performance instruction execution in cloud, still low power code executable thing in light-weighted IoT edge environment using remote instruction execution. We propose a simulated approach to determine efficient partitioning of software runtime in cloud and IoT edge. We evaluated the instruction cloudification using remote instruction by determining the execution time by the proposed structure. The cloud-connected instruction set simulator is newly introduced to emulate the behavior of the processor. Experimental results of the cloud-IoT connected software execution using remote instruction showed the feasibility of cloudification of on-chip code flash memory. The simulation environment for cloud-connected code execution successfully emulates architectural operations of on-chip flash memory in cloud so that the various software services in IoT can be accelerated and performed in low-power by cloudification of remote instruction execution. The execution time of the program is reduced by 50% and the memory space is reduced by 24% when the cloud-connected code execution is used.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.6
• /
• pp.284-292
• /
• 2008

The density of Memory has been increased by great challenge for memory technology; therefore, elements of memory become more smaller than before and the sensitivity to faults increases. As a result of these changes, memory testing becomes more complex. In addition, as the number of storage elements per chip increases, the test cost becomes more remarkable as the cost per transistor drops. Recent development in system-on-chip(SoC) technology makes it possible to incorporate large embedded memories into a chip. However, it also complicates the test process, since usually the embedded memories cannot be controlled from the external environment. We present a ARM processor-programmable built-in self-test(BIST) scheme suitable for embedded memory testing in the SoC environment. The proposed BIST circuit can be programmed vis an on-chip microprocessor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.437-443
• /
• 2007

In this paper, we propose the power-aware test framework for Network-on-Chip, which is based on embedded processor and on-chip network. First, the possibility of using embedded processor and on-chip network isintroduced and evaluated with benchmark system to test the other embeddedcores. And second, a new generation method of test pattern is presented to reduce the power consumption of on-chip network, which is called don't care mapping. The experimental results show that the embedded processor can be executed like the automatic test equipments, and the test time is reduced and the power consumption is reduced up to 8% at the communication components.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2006.02a
• /
• pp.1-14
• /
• 2006

[ $\blacklozenge$ ] PCB에 있어서 Embedded passive 는chip을 직접 내장하는 방법과 특별한 특성을 갖는 재료 및 공법을 사용하여 chip 응 대치하는 방법이 있다. $\blacklozenge$ Embedded passive PCB가 적용될 수 있는 유력한 적용 분야는 소형화가가 요구되는 분야와 고속 특성이 요구되는 분야를 들 수 있고, 따라서, Module, SOP/SIP, Package substrate 등이 우선적으로 적용될 수 있는 분야다. $\blacklozenge$ Embedded capacitor를 적용한 경우, 일반적인 chip capacitor를 적용한 경우보다 더 좋은 전기적인 특성(SRF, Q)을 얻을 수 있으며, solder joint 등의 영향을 포함하면 더욱 좋은 특성이 얻어질 수 있다. $\blacklozenge$ Embedded passive 의 상용화를 위해서, 공차를 관리하는 방법의 개발과 공차에 대한 합리적인 규격을 설정하는 것이 우선 과제이다. $\blacklozenge$ Embedded resistor 의 경우, Laser trim을 적용하여 ${\pm}\;5\%$ 또는 그 이하의 공차를 실현할 수 있고, $30\;K\Omega/sq$. 의 고저항의 적용까지 가능하다. $\blacklozenge$ 고속 신호에서의 noise 감소, module, SIP/SOP 의 소형화를 실현하는데 Embedded passive(혹은 active)PCB 가 기여 할 수 있을 것이고, 이를 위하여 Set 업체, PCB 업체, 재료 업체간의 지속적인 협조가 필요할 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.888-889
• /
• 2015

This paper presents a method of constructing the system-on-chip(SoC) based on embedded systems. The proposed method is more compact and effectiveness than former methods. The requirements generation start high level performance simulation and then passes to an executable specification suitable for implementation using a hardware/software co-design tool. The reuse of pre-exiting components is supported, as well as synthesis of the system interface, but only after much work is done to program the hardware/software co-design tool. The actual design flow described allows feedback among all design levels, e.g. from implementation up to requirements, throughout the process. In the future, it is necessary to development the advanced method of constructing system-on-chip based on embedded systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.277-278
• /
• 2012

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06a
• /
• pp.335-336
• /
• 2008