• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.271-279
• /
• 2014

In this paper, the two design techniques of the embedded system which provides a wireless image observation with temporary ad-hoc network are proposed and developed. The first method is based on the embedded system design technique for a nearly real-time wireless short observation application, having a specific remote monitoring node with a built-in image processing function, and having the maximum rate of 1 fps (frame per second) wireless image transmission capability of a $160{\times}128$size image. The second technique uses the embedded system for a general wireless long observation application, consisting of the main node, the remote monitoring node, and the system controller with built-in image processing function, and the capability of the wireless image transmission rate of 1/3 fps. The proposed system uses the wireless ad-hoc network which is widely accepted as a short range, low power, and bidirectional digital communication, the hardware are consisted of the general developed modules, a small digital camera, and a PC, and the embedded software based upon the Zigbee stack and the user interface software are developed and tested on the implemented module. The wireless environment analysis and the performance results are presented.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.293-296
• /
• 2015

오늘날 차량은 고성능화 및 이용자의 편의를 증진시키기 위하여 다양한 전자장비가 탑재 되고 있다. 이러한 전자장비들을 효율적으로 제어하기 위하여 신뢰성이 입증된 CAN(controller Area Network)이 보편적으로 적용된다. 또한 수신만 가능한 노드(node)는 기존시스템에 추가가 가능하지만 송 수신을 항수 있는 노드를 추가 하는 경우에는 전체 시스템을 변경 시스템을 변경 시스템을 변경해야 하는 경우가 발생할 수 있다. 이러한 특징을 해결하기 위하여 본 논문에서는 CAN 코디네이터(Coordinator)라는 새로운 컴포넌트를 제안하고 이를 기반으로 긴급메시지에 대한 전송지연 개선 및 플러그 앤 플레이 기능을 가능케하는 새로운 CAN 프레임워크를 제안한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.4
• /
• pp.869-879
• /
• 2001

Serial communications such as RS-232C or RS-485 have been used to control and monitor the industrial plants for a long in cooperating with a computer or microprocessor. In recent years a great deal of effort has been made to achieve these control and monitoring through Internet network. This paper proposes a microprocessor system to implement remote control and monitoring system through Internet network. The proposed system uses NE2000 compatible NIC for data link and physical layer to access Internet network The microprocessor employed in the system plays a role of interfacing NE2000 compatible NIC interpreting protocols above link layer, controlling and monitoring industrial plants simultaneously. This paper also shows MMI and experimental results which control and monitor two power plants on the computer monitor with a mouse remotely to verify the proposed.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.47-58
• /
• 2009

In this study, a Hardware-In-the-Loop (HIL) simulator using thrusters is developed to validate the spacecraft attitude system. To control the attitude of the simulator, eight cold gas thrusters are aligned with roll, pitch and yaw axis. Also linear actuators are applied to the HIL simulator for automatic mass balancing to compensate the center of mass offset from the center of rotation. The HIL simulator consists of an embedded computer (Onboard PC) for simulator system control, a wireless adapter for wireless network, a rate gyro sensor to measure 3-axis attitude of the simulator, an inclinometer to measure horizontal attitude, and a battery set to supply power for the simulator independently. For the performance test of the HIL simulator, a bang-bang controller and Pulse-Width Pulse-Frequency (PWPF) modulator are evaluated successfully. The maneuver of 68 deg. in yaw axis is tested for the comparison of the both controllers. The settling time of the bang -bang controller is faster than that of the PWPF modulator by six seconds in the experiment. The required fuel of the PWPF modulator is used as much as 51% of bang-bang controller in the experiment. Overall, the HIL simulator is appropriately developed to validate the control algorithms using thrusters.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.3
• /
• pp.181-189
• /
• 2001

The software components of embedded control systems get extremely complex as they are designed into distributed systems get extremely complex as they are designed into distributed systems consisting of a large number of inexpensive microcontrollers interconnected by low-bandwidth real-time networks such as the controller area network (CAN). While recently emerging middleware technologies such as CORBA and DCOM address the complexity of distributed programming, they cannot be directly applied to distributed control system design due to their excessive resource demand and inadequate communication models. In this paper, we propose a CORBA-based middleware design for CAN-based distributed embedded control systems. Our design goal is to minimize its resource need and make it support group communication without losing the IDL (interface definition language) level compliance to the OMG standards. To achieve this, we develop a transport protocol on the CAN and a group communication scheme based on the well-known publisher/subscriber model. The protocol effectively realizes subject-based addressing and supports anonymous publisher/subscriber communication. We also customize the method invocation and message passing protocol, referred to as the general inter-ORB protocol (GIOP), of CORBA so that CORBA method invocations are efficiently serviced on a low-bandwidth network such as the CAN. This customization includes packed data encoding and variable-length integer encoding for compact representation of IDL data types. We have implemented our CORBA-based middleware on the mArx real-time operating system we have developed at Seoul National University. Our experiments clearly demonstrate that it is feasible to use CORBA in developing distributed embedded control systems possessing severe resource limitations. Our design clearly demonstrates that it is feasible to use a CORBA-based middleware in developing distributed embedded systems on real-time networks possessing severe resource limitations.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.405-411
• /
• 2017

As the number of sensors in a ship has increased, studies have been actively conducted to efficiently manage a large amount of data. Sensors in a ship follow the NMEA (National Marine Electronics Association) data format. In particular, NMEA0183 standardized as IEC 61162-1 and NMEA2000 standardized as IEC 61162-3 are widely used. NMEA0183 is a protocol based on serial communication and NMEA2000 is a protocol based on CAN (Controller Area Network) communication. We implemented a gateway that receives data from NMEA0183 sensors and NMEA2000 sensors and then transmits them to the server on TCP/IP network. By using the NMEA2000 0183/2000 gateway to receive the sensor data and manage it through the ship's preventive maintenance system, the sensor data can be utilized efficiently and promptly. This management can reduce crew's daily tasks and reduce the number of accidents.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.720-725
• /
• 2008

This paper proposes a system architecture for USN with a service robot to provide more active assisted living services for elderly persons by monitoring their mental and physical well-being with USN environments at home, hospital, or silver town. Sensors embedded in USN are used to detect preventive measures for chronic disease. Logged data are transferred to main controller of a service robot via wireless channel in which the analysis of data is performed. For the purpose of handling emergency situations, it needs real-time processing on gathering variety sensor data, routing algorithms for sensor nodes to a moving sink node and processing of logged data. This paper realized multi-hop sensor network to detect user movements with biometric data transmission and performed algorithms on Xenomai, a real-time embedded Linux. To leverage active sensing, a mobile robot is used of which task was implemented with a priority to process urgent data came from the sink-node. This software architecture is anticipated to integrate sensing, communication and computing with real-time manner. In order to verify the usefulness of a proposed system, the performance of data transferring and processing on a real-time OS with non real-time OS is also evaluated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.113-122
• /
• 1998

This paper presents an implementation method of Profibus interface software using FMS(Fieldbus Message Specification). The Profibus interface software is implemented on PC which is widely used as an industrial computer as well as a commercial embedded controller called IUC(Intelligent Universal Controller). In order to enable the Profibus interface software to handle many application tasks and communication services, two kinds of real-time/multi-tasking operating system, OS-9 and CTask, are utilized. We also develop an experimental model of Profibus-based automation system, and evaluate the performance of the Profibus network. Through experiments, the user layer level message latency is measured with respect to the change of message length, message generation interval and TRT(Target Rotation Time). The results of experiment are compared with those of a simulation model which comprises only the physical and data link layers of Profibus. The results of this study shows that the message latency in the user layer level occupies fairly a large part of the total message latency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2120-2130
• /
• 1998

This paper concerns a design of programmable MPEG decoder for video processing by object unit on network. The decoder can process video data effectively by a embedded controller with stack buffers for supporting OOP (Object-Oriented Programming). The controller offers extended instructions that process several data types including 32bit integer type. In addition to that, we have a vector processor, in this decoder that can execute advanced compensation and prediction by half pixel and SA(Shape Adaptive)-IDCT of MPEG-4. Absolutors and halfers in the vector processor make this architecture extensive to a encoder. We verified the decoder with $0.6\mu\textrm{m}$ 5-Volt CMOS COMPASS library.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.2
• /
• pp.104-112
• /
• 2006

ZigBee is the emerging industrial standard for ad hoc networks based on IEEE 802.15.4. It is used for low data rate and low power wireless network applications. Expected applications of ZigBee include wireless sensor networks for remote monitoring, home control, and industrial automation. Since one of the most important design goals of ZigBee is to reduce the installation and running costs, the ZigBee stack is embedded in the cheap and small micro-controller unit. The hierarchical routing algorithm is used for ZigBee end devices which have very limited resources. Using the block addressing scheme, end devices can send data to the destination without a routing table. However, hierarchical routing has the problem that the packets follow the tree hierarchy to the destination even if the destination is located nearby. In this paper, we propose a scheme to improve the hierarchical routing algorithm in ZigBee networks by employing the neighbor table that is originally used together with the routing table. We suggest selecting the neighbor node that has the minimum remaining hops to the destination as the next hop node. Simulation result shows that the proposed scheme saves more than 30% of the hop counts compared with the original hierarchical routing.