• ETRI Journal
• /
• v.31 no.6
• /
• pp.732-740
• /
• 2009

This paper describes the implementation of a digital audio effect system-on-a-chip (SoC), which integrates an embedded digital signal processor (DSP) core, audio codec intellectual property, a number of peripheral blocks, and various audio effect algorithms. The audio effect SoC is developed using a software and hardware co-design method. In the design of the SoC, the embedded DSP and some dedicated hardware blocks are developed as a hardware design, while the audio effect algorithms are realized using a software centric method. Most of the audio effect algorithms are implemented using a C code with primitive functions that run on the embedded DSP, while the equalization effect, which requires a large amount of computation, is implemented using a dedicated hardware block with high flexibility. For the optimized implementation of audio effects, we exploit the primitive functions of the embedded DSP compiler, which is a very efficient way to reduce the code size and computation. The audio effect SoC was fabricated using a 0.18 ${\mu}m$ CMOS process and evaluated successfully on a real-time test board.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.255-257
• /
• 2006

This paper proposed a platform which includes both Network processor and DSP for flexible IED. The Network processor is one of the Intel's IXP4XX Product Line family and the DSP is one of the TI's C6000 family. An embedded Linux is ported in Network processor so that a DSP program can be downloaded to Network processor through ethernet and then downloaded to DSP. Using this method, various algorithms according to IED can be applied to the Network processor board. Maximum ten ADCs can be connected because there is a CPLD between DSP and ADC. That is, the network processor board which can measure maximum 40 channels is implemented. In DSP program, thread and double buffering methods are used not to miss voltage samples. The Network processor board is verified using a method that eight channel voltage signals converted to digital are transmitted to server through both DSP and IXP425.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.1
• /
• pp.25-30
• /
• 2023

We propose a method to update DSP (Digital Signal Processor) firmware using USB (Universal Serial Bus) flash drives. The DSP automatically detects USB drives based on an interrupt when the USB drive is inserted into the USB port. The new firmware binary file is found in the mounted USB drive, and the destination address of DSP flash memory is identified for the firmware update writing by investigating the firmware file header. After the new firmware is written to the DSP flash memory, the DSP is reset and rebooted with the newly updated firmware. By employing TI's TMS320F28379D control card with USB ports, we conduct experiments and verify the normal operation of the implemented method.

• Journal of Korea Multimedia Society
• /
• v.13 no.9
• /
• pp.1322-1328
• /
• 2010

Recently, keyword spotting system is greatly in the limelight as UI(User Interface) technology of ubiquitous home network system. Keyword spotting system is vulnerable to non-stationary noises such as TV, radio, dialogue. Especially, speech recognition rate goes down drastically under the embedded DSP(Digital Signal Processor) environments because it is relatively low in the computational capability to process input speech in real-time. In this paper, we propose a new keyword spotting system using the call-command method, which is consisted of small number of recognition networks. We select the call-command such as 'narae', 'home manager' and compose the small network as a token which is consisted of silence with the noise and call commands to carry the real-time recognition continuously for input speeches.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.983-991
• /
• 2009

While H.264/AVC is in wide use for multimedia applications such as DMB and IPTV service, we have limited usage cases for embedded real-time applications due to its high computational demand. The paper provides judicious guide line for optimization method selection, by presenting the detailed experiments data through the development process of a real time H.264 software encoder on embedded DSP. The experimental analysis includes an intensive profiling analysis, fast algorithm application, optimal memory assignment, and intrinsic-based instruction selection. We have realized a real-time software that encodes CIF resolution videos 15 fps on TMS320DM64x processors.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.9
• /
• pp.1-12
• /
• 1999

In this paper, we designed an embedded processor with 128Kbytes EPROM and 4Kbytes SRAM based on GMS30C2132 which RISC processor with DSP functions. And a new architecture of bus sharing to control the embedded memory and external memory unit i proposed aiming at one-cycle access between memories and CPU. For embedded 128Kbytes EPROM, we designed the new expansion interface for data size at data ordering with memory organization and the efficient interface for test. The embedded SRAM supports an extended stack area high speed DSP operation, instruction cache and variable data-length control which is accessed with 4K modulo addressing schemes. The proposed new architecture and circuits reduced the memory access cycle time from 40ns and improved operation speed 2-times for program benchmark test. The chip is occupied $108.68mm^2$ using $0.6{\mu}m$ CMOS technology.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.99-102
• /
• 2003

Computing environments of Embedded Systems are different from those of desktop computers so that they have resource constraints such as CPU processing, memory capacity, power, and etc.. Thus, when a desktop S/W is ported into embedded systems, optimization should be seriously considered. In this paper, we investigate several S/W optimization techniques to be considered for porting H.263 encoder into a high performance DSP, TMS320C6711. Through experiments, it is found that optimization techniques employed can make a big performance improvement.

• Journal of Welding and Joining
• /
• v.23 no.4
• /
• pp.53-58
• /
• 2005

We designed a weld monitoring system with UV and IR sensors using a embedded DSP controller for implementing a distribution system; running stand alone and communication with outside by industrial standard protocols. Also this system provided a USB port in order to be acquiring data in PC. The user interface program in PC visualized the IR and W data in time, frequency and state space. A correlation of IR and UV signals showed closely related to weld quality. A rapid change of geometry can be found through a moving average filter. And the average value of IR signal at an interval represented a welding width and depth. Through these results, we proposed a monitoring algorithm for a integer type DSP.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.2
• /
• pp.1-8
• /
• 2004

In this paper, we implement the Digital Signal Processing System based on Human Machine Interface technology for the telematics with embedded noise-robust speech recognition engine and develop the communication system which can be applied to the automobile information center through the human-machine interface technology. Through the embedded speech recognition engine, we can develop the total DSP system based on Human Machine Interface for the telematics in order to test the total system and also the total telematics services.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.264-267
• /
• 2000

This paper describes a real-time 3D sound localization algorithm to be implemented with the use of a Bow power embedded DSP. This algorithm first divides the audible frequency band into three, on the basis of the analysis of the sound reflection and diffraction effects through different media from a certain sound source to human ears, and then in each subband a specific procedure is devised fur the 3D sound localization so as to operate real-time on a low power embedded DSP This algorithm aims at providing a listener with the 3D sound effects through a headphone at low cost and low power consumption.