• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.34-43
• /
• 2005

We will catch the spatio-temporal changes that analyse the unknown topography of Go-Gunsan Islands using Landsat TM satellite images into an unsupervised ISODATA classification and a supervised nearest likelihood classification. Each sedimental topography has the different characteristics according to building the Saemangeum embarkment. We will deal with the distribution of sedimental shapes using ERDAS Imagine 8. 6. The result that classifies specifically topographic properties of our research area be considered to get use of establishing the reclaiming program and predicating the reclaimed sedimental topography. The research area can be classified into tidal flats and sea level using band 4 among 7 bands of Landsat TM. Also band 5 can be used to classify the special unknown shapes of tidal flats. We will clarify the efficiency that spatio-temporal sedimental changes can be extracted through processing satellite images. Therefore, the spatio-temporal unknown topography change monitoring using satellite images is expected to be very useful to clarify whether the tidal flat is generated or not in the Go-Gunsan Islands at the outer side of the embarkment after constructing completely the Saemangeum tidal embarkment.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.3
• /
• pp.13-24
• /
• 2020

This study analyzed the characteristics of the grain size distribution of the sediments obtained from the flooding in Ibang-myeon, Changnyeong-gun, which was caused by the collapse of a embarkment on the Nakdong River on August 9, 2020. As a results, it was found that the mean grain size decreases and the sorting becomes poorer as the distance from the embarkment collapse point increases. This is attributed to the fact that the transport energy of the river decreases when flooding occurs, ensuring that coarse-grained sediments are deposited first. Further, as the transport energy further reduces and becomes dispersed, the sorting for the fine-grained sediments becomes poor. Considering the characteristics of spatial distribution, sediments along the farm road showed the properties of floodplain deposits that transport to natural levee and back swamp due to river flooding. On the other hand, sediments along the irrigation ditch exhibited the properties of the deposits that are carried by the flow backward of ditch from the river after the collapse of the embarkment. The results of this study are significant because characteristics of flood sediments were elucidated for major rivers where flooding rarely occurs due to the recently built artificial structures. In addition, by applying the grain size distribution characteristics of present river flood sediments, it will be able to contribute to clarifying the sedimentary environments of the paleo river flood deposits.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.4
• /
• pp.207-220
• /
• 1999

Model tests were performed to investigate the failure modes in embankments on soft ground supported by piles with cap beams. In the model tests, Jumunjin standard sand was placed on simulated cap beams and soft ground. The cap beams are placed perpendicular to the longitudinal axis of the embankment. The colored sand and the Jmniin standard sand were placed one after the other above cap beams and soft ground to make lateral stripes with 3mm thickness in the embarkment. The colored sand was prepared by coating the Jumunjin sand with black lead powder. The photographs illustrate the two characteristic modes of failure in embarkments. One is the soil arching failure and the other is the punching shear failure. The failure mode depends on the height of embankment and the space between cap beams. That is, if the embankment is high enough compared with the space between cap beams, it will fail in arching failure. On the other hand if the embarkment is relatively low or the space between piles is too wide, it will fail in punching shear failure. The soil arching develops in embarkment as a semicylindrical arch with a thickness equal to the width of the cap beam. And the soil wedge developed above the cap beams remains intact during both arching and punching failures. The boundary of punching shear failure of the displaced soil mass can be defined on the basis of observation of the photographs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.210-210
• /
• 2023

하천에서 범람이 발생하는 위험단면을 획득하는 것은 인명 및 재산을 보호하기 위해 매우 중요하다. 이제까지는 특정단면을 현장에서 확인하여 직접측량을 통해 획득하고 이를 위험단면으로 하여 실제 하천 인근에서 홍수로 인해 가장 먼저 범람이 발생하는 위험단면과는 차이를 보일 수 밖에 없었다. 하지만 최근에 UAV(Unmanned Aerial Vehicle) 항공사진측량을 통해 3차원 정보를 획득함으로써 각 세부단면에 대한 분석이 가능해져 보다 정밀한 위험단면을 산정할 수 있다. 각 세부단면을 활용하여 시뮬레이션을 통해 위험단면을 획득한다면 이제까지 직접측량으로 획득한 위험단면보다 홍수로 인해 가장 먼저 범람하는 지점과 최소홍수량 산정이 가능하다. 본 연구에서는 UAV 항공사진측량을 통해 하천의 각 세부단면을 분석하여, 최소 홍수량에서 범람하는 위험단면을 자동으로 산정하는 연구를 진행하였다. 본 연구를 통해 소하천에서 UAV를 활용하여 자동으로 위험단면을 산정한다면 조기경보시스템 등을 설정하는것에 유용할 것으로 판단된다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.7
• /
• pp.31-38
• /
• 2012

Water glass chemical grouts are primarily used in ground injection projects. Natural and Durable Stabilizer (NDS), Space Grout Rocket (SGR), and other similar materials composing of inorganic accelerating agents with ultra fine cement have been gaining popularity as ground improvement material in South Korea. However, there are questions as to grouting results and environmental issues caused by NDS grout. This study uses the injection method in mudstone embarkment to evaluate the differences in strength, permeability, and optimum injection volume through the use of uniaxial and triaxial compression tests and fish poison tests for NDS and SGR materials. After 28 days, results showed SGR and NDS to have a 50% increase in strength and 50% decrease in permeability with the proper injection rate at 50%.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.3
• /
• pp.839-860
• /
• 2013

Drawing on a case of the construction of high-tech medical complexes, this study demonstrates the process of policy formuation. Beause the construction of high-tech medical complexes involves various analytic elements, and changes of political, economic and social environment, Kingdon's Policy Stream Framework is employed for analysis. The analysis ranges from the embarkment of the Presidential Committee on Healthcare Industry Innovation (PCHII) in August, 2005, to the enactment of High-tech Medical Complex Special Act in March, 2008. The analysis illuminates that policy formulation from agenda setting to enactment in the area of biomedical industry involves multiple factors and policy streams. An enactment of policy agenda particularly depends on the roles of multiple stakeholders as welll as policy leaders.