• 컴퓨터교육학회논문지
• /
• 제10권6호
• /
• pp.91-105
• /
• 2007

이미지로부터 타원을 추출하기 위하여 Hough transform을 많이 이용하고 있다. 그러나 이 방법은 시간과 기억 공간을 많이 소모한다. 그리고 기존의 타원분리 방법은 잡음에 예민하거나 많은 breakpoint를 발생시키는 단점이 있다. 이 논문에서는 면적을 이용하여 잡음이 있는 디지털 곡선으로부터 타원을 분리 및 추출하는 빠른 방법을 제시한다. 실험 결과로, 제시된 방법이 잡음을 가지고 있는 곡선으로부터 타원 호의 분리 및 추출이 가능하며, 추출된 타원과 주어진 곡선간의 거리오차평균이 일정 임계값 범위 내에 있는 것을 보여준다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.26-32
• /
• 2001

An ecpert system for rotationally symmetric deep drawing products has been developed. The application for non-axisymmetric components, however, has not been reported yet. This study construsctus and expert system for non-axisymmetric motor frame which shape is classified into ellipse in deep draqing process and investigates process sequence design with elliptical shape. The developed system consists of four modules. The first is recognition of calculate surface area for non-axisymmetric products. The third is blank design module the creates an oval-shaped blank with the same surface area. The fourth is a processplanning module based on production rules that play the best important roles in an expert system for manufacturing .The production rules are generated and upgraded by interviewing field engineers. Especially, drawing coefficient, punch and die radii for elliptical shape products are considered as main design parameters. The constructed system for elliptical deep drawing product would be very useful to reduce lead time and improve accuracy for products.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.525-531
• /
• 2018

The effect of eccentricity on dispersion and nonlinear properties of a photonic crystal fiber having elliptical air holes is investigated using a fully vectorial effective index method. It is found that the effective refractive index increases with increase of eccentricity. The dependence of dispersion and nonlinear properties of the PCF on the eccentricity of the air hole is investigated. It is revealed that eccentricity of the air hole affects the zero dispersion wavelength. Further, the nonlinear properties such as mode field area, nonlinear coefficient and self phase modulation of the Photonic crystal fibers are analyzed. The mode field area increases and the nonlinear coefficient decreases with increase in eccentricity. The variation of the self phase modulation with elliptical air hole is also discussed.

• Tribology and Lubricants
• /
• 제21권6호
• /
• pp.272-277
• /
• 2005

Continuously variable transmission (CVT) of toroidal type has a elliptical shape of contact zone under the elastohydrodynamic lubrication (EHL) condition, where the power is transmitted only by shearing the lubricant. Due to the small contact area of elliptical shape, the traction of the shear behaviors of lubricant over the contact zone is under extremely high contact pressure over 1.0GPa. During the power transmission by shearing the fluid, many kinds of mechanical movements occur such as squeezing, sliding, rolling and spin. Among the movements, the spin effect that is the most undesirable contact behavior in transmitting the power frequently makes significant abnormal wear damage. In this work, the analysis of elliptical contact of EHL with spin effect is performed, which will give very useful information to understand the traction behaviors in toroidal type of CVT system.

• 소성∙가공
• /
• 제8권6호
• /
• pp.591-603
• /
• 1999

A computer-aided process planning system for rotationally symmetric deep drawing products has been developed. The application for non-axisymmetric components, however, has been reported yet. Therefore, this study investigates process sequence design in deep drawing process and constructs a computer-aided process planning system for non-axisymmetric motor frame products with elliptical shape. The system developed consists of three modules. The first one os a 3-dimensional modeling module to calculate surface area for non-axisymmetric products. The second one is a blank design module that creates an oval-shaped blank with the identical surface area. The third one is a process planning module based on production rules that play the best important roles in an expert system for manufacturing. The production rules are generated and upgraded by interviewing with field engineers. Especially, drawing coefficient, punch and die radii are considered as main design parameters. The constructed system for elliptical deep drawing products would be very useful to reduce lead time and improve accuracy for production.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.320-324
• /
• 2017

아음속 공기유동으로 수직분사하는 액체제트에 대하여 오리피스 형상이 달라질 경우, 분무특성에 어떠한 영향을 미치는지 실험적으로 연구하였다. 서로 다른 오리피스 길이 대 직경비와 타원형 노즐의 종횡비를 갖는 분사기들을 제작하여 수직분사 실험을 진행하였다. 원형노즐과 타원형 노즐에서의 분열길이를 비교하였으며, 타원형 노즐에서의 분열길이는 모든 실험조건에서 원형노즐에 비해 줄어들었다. 캐비테이션과 수력튀김 현상이 분사기 내부에 발달되는 분무차압 조건의 경우, 두 노즐 모두 분열길이가 감소하였다. 액주궤적의 경우, 장축으로부터 분무되는 액체제트가 횡방향 공기유동에 수직으로 부딪혀 나가는 경우가 액주의 궤적이 단축에 비해 더 휘어지며, 침투높이가 낮아진다.

• 한국CDE학회논문집
• /
• 제7권1호
• /
• pp.9-17
• /
• 2002

The study is insufficient on process planning of the elliptical deep drawing product. Thus, in this present study, the expert system for elliptical deep drawing products was constructed by using process sequence design. The expert system was developed to be based on the general concept of each entity. The system was developed in this work consists of sixth modules. The first one is a shape recognition module to recognize non-axisymmetric products and to generate Entity_list. The second one is three dimensional (3-D) modeling module to calculate the surface area for non-axisymmetric products. The third one is a blank design module to create suggested blanks of three shapes with the identical surface area. The fourth one is shape design module based on the production rules that play the most important role in an expert system for manufacturing. The production rules are generated and upgraded by inter- viewing field engineers, plastic theory and experiments. The fifth and sixth ones are a graphic module to visualize results of the expert system and a post module to rise user's convenience, respectively. According to constructed the expert system for process sequence design, it was possible to reduce the lead time.

• 한국산업정보학회논문지
• /
• 제13권4호
• /
• pp.56-63
• /
• 2008

얼굴 인식률 향상을 위해서는 전처리 단계에서의 영상 보정이 매우 중요하며, 특히 배경 잡음 제거는 얼굴 인식의 정확도에 중대한 영향을 미친다. 본 논문에서는 얼굴 인식률 향상을 위하여 전처리 단계에서 타원 모델을 이용하여 배경 영역을 제거하는 방법을 제안하였다. 사람의 얼굴 윤곽은 타원의 형태를 나타내기 때문에 얼굴 영상에서 타원 모델을 이용할 경우 얼굴 영역을 용이하게 검출할 수 있다. ETRI, ORL, 및 XM2VTS 얼굴 데이터베이스에 대한 실험 분석을 통하여 제안된 방법이 얼굴 인식 성능을 뚜렷하게 개선시켰음을 알 수 있었다.

• 한국CDE학회논문집
• /
• 제5권3호
• /
• pp.255-262
• /
• 2000

A computer-aided process planning (CAPP) system for rotationally symmetric deep drawing products has been developed. The application for non-axisymmetric components, however, has not been reported yet. Therefore, this study investigates process sequence design in deep drawing process and constructs an expert system of process planning for non-axisymmetric motor frame products with elliptical shape. The system developed consists of four modules. The first one is recognition of shape module to recognize the products. The second one is a 3-D modeling module to calculate surface area for non-axisymmetric products. The third one is a blank design module that creates an oval-shaped blank with the identical surface area. The forth one is a process planning module based on production rules that play the best important role in an expert system for manufacturing. The production rules are generated and upgraded by interviewing with field engineers. The constructed system using AutoLISP language under the AutoCAD environment is baled on the knowledge base system which is involved a lot of expert's technology. Results of this system will be provide effective aids to the designer and engineer in this field.

• 설비공학논문집
• /
• 제7권1호
• /
• pp.73-80
• /
• 1995

The object of the present study is to develop a high performance evaporator for automotive air conditioner. The experiment has been conducted on evaporative heat transfer coefficient inside a plate type heat exchanger with a sharp 180-degree turn flow. The test plates have different formed surface, cross-ribbed channel and elliptical-ribbed channel. Also experimental study has been performed to determine optimal design in elliptical-ribbed plate heat exchanger with different turn clearance. In addition to the above experiments, refrigerant behavior and surface temperature distribution in the plate heat exchanger were observed using color thermoviewer(infrared thermometer). In this experiment, working fluid was used R-12 and test conditions were as follows : (1) saturation pressure of $2.116kg/cm^2$, (2) mass fluxes of 40 to $70kg/m^2s$, (3) heat fluxes of 4,500 to $7,300W/m^2$, (4) inlet quality of 0.1 to 0.7. The results indicated that the evaporative heat transfer coefficient of an elliptical-ribbed plate heat exchanger was higher than that of cross-ribbed plate heat exchanger. Also optimal turn clearance in an elliptical-ribbed plate heat exchanger was determined.