• 정보처리학회논문지B
• /
• 제16B권4호
• /
• pp.271-280
• /
• 2009

본 논문에서는 옥외 비디오 영상에서 영역 확장법을 이용한 연기 영역검출 방법을 제시한다. 제안된 방법은 차영상에 의한 초기 변화영역 검출 단계, 경계선 검출 및 확장 단계, 특징 검출 및 연기분류의 3단계로 구성된다. 초기 변화영역 검출 단계에서는 배경영상으로 차영상을 계산하고, 초기 임계치를 이용하여 이진영상을 구하고, 잡음 제거를 위하여 모폴로지 연산을 수행한다. 경계선 검출 및 확장 단계는 레이블링 알고리즘에 의해 이진영상에서 변화영역을 검출하고, 각 변화영역의 경계선을 검출한 다음, 차영상과 경계선을 이용하여 확장된 경계선을 계산한다. 특징 검출 및 연기분류 단계에서는 확장된 경계선에 모멘트를 이용하여 타원을 추정하고 타원의 시간에 따른 특징정보를 이용하여 연기 영역을 분류한다.

• 대한조선학회지
• /
• 제21권1호
• /
• pp.21-34
• /
• 1984

This paper is concerned with the experimental investigation of transverse vibration characteristics in water of rectangular plates having an inner free cutout. Systematic experiments are carried out to investigate effects of the surrounding water on the added mass and the natural frequency of the plates due to the changes of the aspect ratio, hole size and eccentricity. The main subject is the clamped rectangular plate with a circular hole. For the purpose of comparative evaluations, some other common-type boundary conditions and hole shapes such as ellipses and rectangles are also investigated. Some of the results obtain are as follows; 1) For each given aspect ratio of the plate, there is a hole area ratio which gives a minimum value of the nondimensional frequency parameter for each mode. The hole area ratio increases as the order number of the mode increases. 2) The nondimensinal mass-increment parameter decreases as the aspect ration or the order number of the mode increases. For each given aspect ratio, the parameter the fundamental mode decreases monotonically as the hole area ratio increase. In cases of the second and higher order modes, however, each mode has a hole area ratio which gives a maximum value of the parameter for each aspect ratio more then 2/3. 3) Comparing elliptic holes with rectangular ones with same hole area ratio, nondimensional frequency parameters are almost same for each given ratio of the shorter axises to the longer one. 4) The influences of difference in boundary condion on nondimensional frequency parameters in water are similar to those in air.

• 한국환경과학회지
• /
• 제9권6호
• /
• pp.475-482
• /
• 2000

The purpose of this study is to find out the temporal and spatial characteristics of the diurnal wind variation between coastal and inland areas using the hourly wind data of 58 AWS-stations in the South Korea which are collected during the 10 years from 1980. Diurnal variation is investigated by using the Fast Fourier Transform(FFT), and the wind direction in investigated by comparing C(sub)r with C(sub)v represented the constancy of wind. For the scalar wind speed, the maximum wind speed occurs in the daytime 14h to 16h. The maximum diurnal amplitude at coastal areas occurs from 12h to 16h, and is about 2 hours faster than that at inland areas. Vector mean wind speed is strong at coastal areas and Chupungnyong, Kumi, Taegu of inland areas. The diurnal variation ellipses make a right angle with coastline show that the land and sea breezes are prevailing. The constancy of wind is strong at all observations in January. In the relationship between $C_r and C_v, C_v is higher than C_r$.

• 수산해양기술연구
• /
• 제56권1호
• /
• pp.1-10
• /
• 2020

In the previous study, a shooting trajectory assuming that the purse seine shooting trajectory is a circle was proposed based on the speed and direction of the movement of the fish school. However, in practice, a trajectory that is closer to an elliptical shape than a circular one is often formed. In this study, the existing circular trajectory and the elliptical trajectory methods were compared under the same conditions to confirm the effectiveness of elliptical shooting trajectory. In addition, changes in the eccentricity of ellipses were derived to assess which type of ellipse was appropriate as a shooting trajectory. When a high-speed fish school moves in a straight line, an elliptical shooting trajectory with the eccentricity of 0.7 to 0.9 will be reasonable, and for middle-low speed fish school, an elliptical shooting trajectory with the eccentricity of 0.4 to 0.6 will be more useful than a circle shooting trajectory.

• 자원환경지질
• /
• 제30권5호
• /
• pp.451-458
• /
• 1997

The horizontal magnetic dipole as well as electrical dipole was adopted as a source to compute one-dimensional electromagnetic field behavior in controlled source magnetotellurics. he Cagniard impedances due to horizontal magnetic dipole source, especially phases, showed better frequency characteristics than those due to electric one. The magnetic dipole is inferior to the electric dipole in the point of relatively weak transmitting power at low frequency. But considering high resistivity charateristics of Korean geology, the magnetic dipole source is recommended for the survey up to depth of 500 m. A vector CSMT was introduced to get more reliable data in the area of two- or three-dimensional structures. A software and interpretation technique using polarization ellipses were developed. The technique was tested by synthetic data, which provided theoretical basis of the methodology. Although CSMT has inevitable limitation of investigation depth due to practically possible source-receiver separation, we proposed to use the technique developed in this paper where MT is not available, for example, in extremely noisy area or for shallow target.

• 한국통신학회논문지
• /
• 제32권6C호
• /
• pp.572-578
• /
• 2007

영상 회의 시스템에서는 현실감을 높이기 위하여 대화 상대방과 시선을 맞추는 eye contact을 만들어 주는 것이 중요하다. 이를 위하여 영상 기반 방법과 모델 기반 방법 등의 시점합성기법이 연구되고 있다. 전자는 계산이 간단하나 부정확하고, 후자는 잡음에 강하고 정확한 영상을 만들어 내지만 시간이 많이 걸리는 단점이 있다. 본 논문에서는 얼굴 영상을 타원으로 근사화시키고 이를 3차원 공간에서 타원체로 모델링하여 임의의 가상 카메라의 위치에서 영상을 합성하는 방법을 제안하였다. 여러 가지 실험을 통하여 제안한 방법이 계산량이 적으면서도 성능이 우수함을 입증하였다.

• 한국광학회지
• /
• 제15권3호
• /
• pp.258-262
• /
• 2004

검출기의 분광감응도 표준으로부터 출발하여 SI 기본 단위의 하나인 칸델라(candela)눈금의 불확도는 복사계 개구의 면적 측정 불확도에 의해서 제한을 받는다. 칸델라 눈금을 새로 실현하기 위하여 다이아몬드 선삭가공기를 사용하여 개구의 가장자리가 칼날과 같도록 가공하였다. 이 개구를 디지털 되먹임 알고리듬을 채용한 x-y 이송대에 설치한 후, 출력이 안정화된 레이저 광선을 빔 허리가 5 $\mu\textrm{m}$ 이하가 되도록 집속시키고, 이송대를 이동하면서 개구의 가장자리 좌표를 칼날주사 방법으로 검출하였다. 이 좌표들을 지나는 최적의 타원을 최소 제곱법으로 결정하여 개구의 면적으로 구하였다. 측정 불확도를 분석한 결과 제작한 장치의 면적 측정의 상대 측정 표준 불확도(k=1)는 8${\times}$$10^{-5}$이다.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.192-198
• /
• 2016

The distributions of (or constraints for) amplitude and phase around C-points, including Lemon, Mon-Star and Star, are studied. A Cartesian coordinate system with origin at the C-point is established. Four curves, where the azimuthal angles of polarization ellipses are 0°, 45°, 90°, and 135° respectively, are used to determine the distributions. Discussions of these constraints illustrate why Mon-Star is rarer than Lemon or Star in experiments. The transformation relationships between these three polarization singularities (PSs) are also discussed. We construct suitable functions for amplitude and phase according to their constraints, and simulate several PSs of particular shapes. With the development of modulation techniques for amplitude and phase, it is clear that this work is helpful for generating arbitrarily shaped C-points in experiments.

• 한국해안해양공학회지
• /
• 제13권2호
• /
• pp.109-121
• /
• 2001

잠재된 평판 방파제가 해수 교환에 미치는 영향을 실험적으로 조사하였고 그 결과를 제시한다. 흐름은 PIV 시스템으로 관측되었으며 조화분석으로부터 분리된 평균 흐름과 파랑 타원이 각각 제시된다. 실험결과, 순환유량은 입사파의 체적플럭스와 밀접한 관계가 있으며 쌍와류가 평판 후면에서 관측되었다. 염료추적에 의하면 평판위에서 발생된 제트류로 인한 난류의 영향으로 유입되는 해수와 항내 오염물질이 상당히 잘 섞이고 있음을 보여주고 있다.

• 한국소음진동공학회논문집
• /
• 제26권4호
• /
• pp.398-405
• /
• 2016

A shape of loop-pipe in a compressor affects the vibration of compressor. In this paper, optimal design of shape of loop-pipe to decrease the stress was carried out. Body and shell were assumed to be rigid, while loop-pipe is considered to be flexible. The finite element model was derived and programmed. Genetic algorithm was used for optimization. Locations of 18 point in loop-pipe were considered as shape variables, while the shapes of loop-pipe were interpolated as polynomials or ellipses. Maximum stress of loop-pipe was used as a fitness function for optimization. The spatial constraints and acceleration response of shell were also considered in optimization. The maximum stress and acceleration could be reduced by 79 % and 49 % respectively.