• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.9-16
• /
• 2018

The purpose of this research was influenced by the historical background of Japanese modern architecture by the circulation of Kuma Kengo's architectural works and he wanted to look at the values and directions he was pursuing and how they were expressed in his works. The results of the review are summarized as follows. First, metabolism was developed as a reaction of modernism in modern architecture, focusing on growth through infinite reproduction by looking at architecture and cities as organisms and by using unit space as cells. Kuma Kengo, on the other hand, argues that focusing on the possibility of decimation of unit members by sequencing the elements that make up the space smaller than the unit space is closer to an ecological architecture. Second, what Kuma Kengo says is "erase the architecture" that is naturally related to the environment and disappears when its use is exhausted. His argument is expressed in individual architectural works through 'visual erase', 'particle painting of materials' and 'independence through dependency.' Through this, Kuma Kengo's ecological architectural languages were influenced by the ecological causes of metabolism, but they differed from the perspective of seeing architectural circulation as an organism. If metabolism was intended to realize circulation with growth potential based on the module of unit space, Kuma Kengo sought to implement circulation with the extinction of the unit members of space.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1245-1251
• /
• 1999

Phase-change optical disk very rapid recording, high densification of data, resulting in high feedback rate and good C/N(carrier to noise) ratio of a feedback signal. However, repetitive thermal energy may cause the deformation of a disk or the lowering of an eliminability and a cyclability of the recording. The lowering of the cyclability can be reduced by insertion of thin layer of ZnS-$SiO_2$ dielectric thin film in appropriate disk structure between the upper and lower part of the recording film. Using the Taguchi method, optimum conditions satisfying both the optimized quality characteristic values and the scattering values for film formation were found to be the target R.F. power of 200W, the substrate R.F. power of 20W, the Ar pressure of 6mTorr, and the electrode distance of 6cm. From the refractive index data, the existence of the strong interaction between the electrode distance and Ar pressure was confirmed, and so was the large effect of the electrode distance on transmittance. According to the analysis of TEM and XRD, the closer the electrode distance was, the finer was the grain size due to the high deposition rate. However, the closer electrode distance brought the negative effect on the morphology of the film and caused the reduction of transmittance. AFM and SEM analyses showed that the closer the electrode distance was, the worse was the morphology due to the high rate of the deposition. Under optimum condition, the deposited thin film showed a good morphology and dense microstructure with less defects.