• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1757-1762
• /
• 2007

Recently, the demand for the low cost power conversion equipment is rapidly increased. To develop this three phase voltage source inverter, optimum power conversion equipment to system is designed. The optimum operation method to minimize the power loss also satisfy the life time of the power electronics that is request in the present industry. In this paper, the efficient operating method to change of the acceleration, jerk, and switching frequency in the interval of acceleration is selected to optimize the power loss and life time of the power electronics by using the elevator model. So, we proposed the method that 50[A] rating power electronics is adopted in 9[kW] load.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1179-1181
• /
• 2001

For high performance induction motor drives such as mill drives, elevator, spindle drive, NC and so on, smart speed controls is usually required, that requires a precise current control. This paper is proposes design of fuzzy controller which makes use of the output voltage of the space vector PWM inverter. Also, proposes the performance fuzzy controller for high performance vector control of induction motor drive system. The performance of a fuzzy controller is compared with that of an PI controller in an internal loop. The validity of the proposed technique is confirmed by simulation results for induction motor drive system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1624-1627
• /
• 2005

We proposed a design technique for auto-landing guidance and control system. This technique utilizes linear controller and neural network. Main features of this technique is to use conventional linear controller and compensate for the error coming from the model uncertainties and/or reference model mismatch. In this study, the multi-perceptron neural network with single hidden layer is adopted to compensate for the errors. Glide-slope capture logic for auto-landing guidance and control system is designed in this technique. From the simulation results, it is observed that the responses of velocity and pitch angle to commands are fairly good, which are directly related to control inputs of throttle and elevator, respectively.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.405-408
• /
• 2004

본 논문에서는 시간과 부하의 변화에 따라 편안한 승차감과 빠른 속도를 가질 수 있도록 다양한 속도 패턴을 제공하는 퍼지 알고리즘을 실제 공정에 적용할 수 있도록 SoC Design을 하였다. 운송 속도와 승차감은 엘리베이터 속도 패턴을 결정하기 위한 두개의 중요한 요소이며, 본 논문에서는 운송능력을 향상시키기 위해 교통량 변화에 맞춰서 저크를 조정하였다. 여기에서 구현된 퍼지 추론 시스템은 2개의 입력 변수와 1개의 출력을 가진 시스템이다. 전반부는 교통량의 변화를 나타내며, 시간 입력에 대해서 사다리꼴 형태의 소속함수를 사용하였다. 후반부는 입력에 대응되는 속도 패턴으로써, 싱글톤이 후반부에 적용되었다. 본 논문에서 구현 Tool 로는 SoC 설계를 사용하였다. SoC 설계는 현재 그 확장성과 유연성에 뛰어난 장점을 지니고 있으며, 제안된 알고리즘을 모듈로 설계하여 프로그래밍과 실행 사이클을 단축시키는 효과가 있다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.4
• /
• pp.48-53
• /
• 2005

This research is materialized the mechanism of a interlocking elevator device to meet with customer's requirement demanding a variety of function. On this suitably theoretical translation and by considering of material significance of the most factor's tension spring and torsion spring, it's compared and reviewed the stress's calculation according that SWC and SWPB applied differently. And also that is approved through actual experiment. Out of a variety of feasible movement. Torque Balance is materialized by combination of tension spring, torsion spring and disk spring. So that application of 3 factors for optimal design is very important factor. In future, this research thesis make sure to play a highly role for application and improvement mechanically in various industry sector out of materializing interlock.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.106-108
• /
• 1997

Many new office buildings are being built as intelligent buildings equipped with building automation(HA) systems, office automation(OA) systems, and telecommunication(TC) systems in order to provide pleasant building environment and the ease of maintenance and facility management. Building control systems which are employed in intelligent buildings require varieties of advanced control systems and network systems for efficient integrated management. Design and installation of these types of advanced building control systems take a lot of efforts and also they are costly. In order to design these systems, it is necessary for the designers to have the integrated simulator including proper network system simulation. In this paper, the integrated simulator that consist of HVAC system, lighting system, elevator system, parking system based on the network system is presented. For the development of integrated simulator, AHENA which is the general-purpose software tool for a simulation with reinforced GUI is used.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.7
• /
• pp.800-808
• /
• 2004

Wind tunnel test of an airplane model with forward swept wing was done in KARI LSWT to evaluate and measure the aerodynamic characteristics of initially designed configuration. Since the given wing planform did not fully satisfy the design requirements, local flow control devices such as vortilon, vortex generator and flow fence were used to delay separation and to enhance aerodynamic characteristics. Also decision making processes of design parameters such as vertical tail boom length, the location, size and the incidence angle of horizontal tail were discussed. The general aerodynamic characteristics of forward swept wing for various control surface deflection conditions of flap, aileron and elevator were also given.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.653-656
• /
• 2000

We consider, in this paper, a UML-based design support system for real-time systems. However, the UML does not include any notion for verification of timing constraints. We presents transformation algorithms, as a function of the support system, of UML descriptions into Petri nets and Interval Temporal Logic models, which are very powerful for the verification. This paper shows also transformation example for simple elevator system.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.273-277
• /
• 2009

This study was conducted to develop standards for evaluating what extant the physical environments of housing which can cope with the needs of the aging society. This study was consisted through literature investigation research mainly, and research target literature limits keyword to elderly housing environment and chose connected domestic various literatures. The scope of evaluation was limited to the indoor spaces and outdoor spaces of housing as it was thought that the elderly spend much more time at indoor, outdoors, considering their physical characteristics. The study are as follows ; First, in outdoor only area from design environment element accessibility, and safety emphasized from equipment element, health of community territory was expose from design environment element that supportiveness is emphasized from equipment element. Second, in living room safety emphasized from design environment element in bedroom and bathroom of indoor individuation space, vestibule, balcony supportiveness, health was expose that is emphasized kitchen and mess. Also, was expose that supportiveness is emphasized from equipment element of all individuation spaces. Third, was expose that design environment element in corridor that is indoor official business space, stair, lobby, elevator and safety from equipment element and supportiveness are emphasized.

• Journal of the Korean housing association
• /
• v.21 no.1
• /
• pp.151-159
• /
• 2010

This study was conducted to develop standards for evaluating what extant the physical environments of housing which can cope with the needs of the aging society. This study was consisted through literature investigation research mainly, and research target literature limits keyword to elderly housing environment and chose connected domestic various literatures. The study are as follows; First, in outdoor only area from design environment element accessibility, and safety emphasized from equipment element, health of community territory was expose from design'environment element that supportiveness is emphasized from equipment element. Second, in living room safety emphasized from design' environment element in bedroom and bathroom of indoor individuation space, vestibule, balcony supportiveness, health was expose that is emphasized kitchen and mess. Also, was expose that supportiveness is emphasized from equipment element of all individuation spaces. Third, was expose that design environment element in corridor that is indoor official business space, stair, lobby, elevator and safety from equipment element and supportiveness are emphasized.