• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2785-2792
• /
• 2013

An elevator is driven by the friction between the pulley and wire rope. A balancing counter weight is connected to the elevator car with a wire rope. This structure is essential to drive elevators while it always has weight unbalance problems on each side. The overbalance-ratio of elevators may be an important factor for safety and structural efficiency; however, it is not yet clearly defined in the Requirements of Korea Elevator Inspection. This paper describes these "weight unbalance ratio" for control of elevators to reduce the number of accidents. It includes the analysis of current elevator maintenance situations and also proposes some fundamental improvement schemes for safety.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1487-1490
• /
• 2002

In this paper, a design methodology of fuzzy sliding mode control scheme for a hydraulic elevator controlled by inverter is presented. The proposed scheme uses a fuzzy sliding mode controller(FSMC), which is designed based on the similarity between the fuzzy logic control(FLC) and the sliding mode control(SMC). The proposed method has advantages that the stability and the robustness of the FLC are proved and ensured by the sliding mode control law, and the computation burden could be reduced greatly. The validity and the effectiveness of the proposed control method have been shown through the real world industrial application results.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.74-83
• /
• 2019

In the U.S., the pressurization of elevator shaft was developed in 1972 to allow vulnerable people, such as the elderly and weak who could not use escape stairs in case of fire, to evacuate. It is an advantage in terms of space saving by not using vertical ducts. This study drew the problem of the pressurization of elevator shaft based on the existing domestic patents and proposed improvements. The smoke control volume calculation method is proposed by using vertical modeling. Leakage gaps in elevator doors need to be reviewed through experimental data or actual data. The evacuation floor was divided, the openings in the elevator machine room were automatically closed to the fire signal and the relief damper was installed to improve the performance. The improved method functions as the smoke control damper supplying the air flow rather than maintaining the differential pressure. To increase reliability of the research results, the procedure was performed to verify by using Contam.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.857-862
• /
• 1992

An elevator group supervisory control logic is investigated to supervise multiple elevators, ensuring their efficient operations. In this paper, a predictive fuzzy control logic of group elevator system is developed for coping with multiple control objects and uncertainty of system state. Simulation of this control logic shows considerable improvements of system performance by the reduction of average waiting time and long wait rate.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.11a
• /
• pp.55-68
• /
• 2007

Because of not accepted on escape using elevators in fire emergency has some background. In the background elevator hoistway has turn into smoke spread route in fire. The escape that used an elevator was not able to make ends meet; of the big confusion is expected that cannot control the escape adequately, and do that elevator facilities breakdown possibility by the fire water, the escaper shut in car. Therefore ban on elevator service in fire time as a general rule. Recently, a few company promote super high-rise architecture in the country, a fire disaster prevention and human life safety measures preparation for PBD(A Performance Based Fire Protection Design) are studied concretely. And there is the escape example in fire time that used an elevator in the foreign country. You must promote it so that the escape measures that used enclosed stairway and an elevator in charge of a function of the mutual supplement. The result of this research can be used for establishing the standard and regulation for using elevators in fire emergency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1260-1268
• /
• 2005

Ladder Diagram(LD) is the most extensively used among PLC standard language for the design of control system. But LD has the disadvantages for data processing and maintenance. On the other hand, the Sequential Function Chart(SFC) graphic language is very powerful for describing the sequential logic control algorithm. SFC is based on flow chart, so control flow understanding is very easy and divergence can possible improving its ability. In this paper, we propose the efficient management elevator system using the action qualifiers and choice divergence. From the result, we confirm the SFC language reduced program memory capacity and processing time is faster than LD language.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.69-77
• /
• 2019

Today, most of elevators have an emergency call facility for emergency situations. However, if the network installed in the elevator is also out of power, it cannot be used for the elevator remote monitoring and management. So, we develop an integrated and unified emergency call system, which can transmit not only telephone call but also data signals using PSTN(Public Switched Telephone Network) in order to remote monitoring and management of elevators, even though a power outage occurs. The proposed integrated emergency call system to process multiple data such as voice and operational information is a multi-channel board system which is composed of an emergency phone signal processing module and an operational information processing module in the control box of elevator. In addition, the RMS(remote management server) systems based on the Web consist of a dial-up server and a remote monitoring server where manages the elevator's operating information, status records, and operational faults received via the proposed integrated and unified emergency call system in real time. So even if there's a catastrophic emergency, the proposed RMS systems shall ensure and maintain the safety of passengers inside the elevator. Also, remote control of the elevator by this system should be more efficient and secure. In near future, all elevator emergency call system need to support multifunctional capabilities to transmit operational data as well as phone calls for the safety of passengers. In addition, for safer elevators, it is necessary to improve them more efficiently by combining them with high-tech technologies such as the Internet of Things and artificial intelligence.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.79-80
• /
• 2015

This paper deal with the structure and the operating characteristics of the two-dimensional elevator system and the concept that supports to the circuit design for the driving control of the LIM in the simplest possible way. The Horizontal Axis, The Vertical Axis, that is to say, designed a motor that can move between two dimensions by using two of LIMs, especially this control system was described by a sequence control design drawing. The body of this paper has shown the characteristics and validity of this control design system and also analyzed how to apply operating characteristics of the LIM in the elevator industry.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1218-1221
• /
• 1993

The elevator group control systems are the control systems that manage systematically three or more elevators in order to efficiently transport the passingers. In the elevator group control system, the area-weight which determines the load biases of elevators is a control parameter closely related to the system performance. This paper proposes a fuzzy model based method to determine the are-weight. The proposed method uses a two-stage fuzzy inference model which is built by the study of area-weight properties and expert knowledge. The proposed method shows the more desirable results than the conventional method in the simulations that use real traffic data.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.627-630
• /
• 1991

This study is about vector controlled inverter for high quality elevator drive that is to improve the settling accuracy of elevator car and passenger's comfort in commercial buildings. In this study, an instantaneous space vector control type inverter was used to reduce the torque ripple ant to improve the velocity follow-up. This method calculates Instantaneous actual output torque and flux of induction motor by voltage and current, then compares them with a reference values by a speed regulator. The outputs of comparators select a switching mode, for an optimal voltage vector. Also, this study used IGBT (Insulated Gate Bipolar-Transistor), a high speed switching element, to reduce sound noise level, and DSP (Digital Signal Processor) was used to improve the reliability of the control circuit by fully digitalization.