• 한국태양에너지학회 논문집
• /
• 제34권6호
• /
• pp.19-25
• /
• 2014

Alternative sources of energy take a higher interest in order to reduce the greenhouse gas under the Climate Change Convention, fossil fuel consumption, and lower social anxiety about nuclear power such as crisis involving the Fukushima plant, problem of obsolete equipment. The energy consumption of agriculture, forestry and fisheries in South Korea is 3,082,000toe by 2011, reliance on electrical energy(35%) and oil(57.2%) is very high with 92.2%. In this study, we examined reserves and available capacity of temperature difference energy for thermal discharge from plant, treated sewage, river water, dam, and agricultural reservoir in rural community. Reserves of unutilized energy are 455,735Tcal/yr in rural community, these accounts for 78% of total reserves 582,385Tcal/y. Thermal discharge from plant has the most reserves of unutilized energy in rural community, it is estimated that it has the reserves of 277,410Tcal/y. Available capacity of unutilized energy in rural community is total 134,147Tcal/y, thermal discharge from plant available for heating is the most 128,035Tcal/y, and it shows in the order of treated sewage 4,318Tcal/y, river water 1,653Tcal/y, and reservoir 141Tcal/y. Elevating temperature area of green house by 2012 is 21,208ha. The amount of energy required for heating the greenhouse a year is dbout 11,365Tcal/y with 8.5% of the total available capacity of unutilized energy.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

• Journal of Yeungnam Medical Science
• /
• 제35권2호
• /
• pp.199-204
• /
• 2018

Background: The authors have performed ultrasound-guided stellate ganglion block (SGB) in our clinic using a lateral paracarotid approach at the level of the 6th cervical vertebra (C6). Although SGB at C6 is a convenient and safe method, there are ongoing concerns about the weak effect of sympathetic blockade in the ipsilateral upper extremity. Therefore, ultrasound-guided SGB was attempted using a lateral paracarotid approach at the level of the 7th cervical vertebra (C7). This prospective study aimed to compare changes in skin temperature after SGB was performed at C6 and C7, and to introduce a lateral paracarotid approach for SGB. Methods: Thirty patients underwent SGB twice: once at C6 and once at C7. For every SGB, the skin temperature of the patient's hypothenar area was measured for 15 min at 1-min intervals. Skin temperatures before and after SGB and side effects were compared between C6 and C7 groups. Results: The temperature of the upper extremity increased after SGB was performed at C6 and C7. There were significant differences between mean pre-SGB and the largest increases in post-SGB temperatures ($0.50{\pm}0.38^{\circ}C$ and $1.41{\pm}0.68^{\circ}C$ at C6 and C7, respectively; p<0.05). Significantly increased post-SGB temperatures (difference > $1^{\circ}C$) were found in 5/30 (16.7%) and 24/30 (80%) cases for C6 and C7, respectively (p<0.05). There were no significant differences in side effects between SGB performed at C6 or C7 (p>0.05). Conclusion: The lateral paracarotid approach using out-of-plane needle insertion for ultrasound-guided SGB performed at C7 was feasible and more effective at elevating skin temperature in the upper extremity than SGB at C6.

• 한국식품저장유통학회지
• /
• 제14권6호
• /
• pp.722-726
• /
• 2007

울금에 들어 있는 curcumin성분의 추출조건 확립 및 HPLC에 의한 최적 분석조건과 쓴맛성분 제거방법 등을 검토한 결과, 메탄올에서 흡수파장은 424 nm 부근에서 최대흡광도를 보였으며, HPLC의 최적 분석조건은 UV 424nm에서 Zorbax eclipse $C_{18}$ column을 사용하여 분석할 경우, 이동상은 75% MeOH, 유속 0.8 mL/min에서 가장 좋은 분리 결과를 보였다. Curcumin 성분은 메탄올추출물이 가장 높은 함유량을 보였으며, 모든 시료구에서 상온 추출보다는 가열 추출이 더 높은 함유량을 보였다. 또한 메탄올과 에탄올추출물의 curcumin 함량은 물 추출물에 비하여 상온에서 각각 14.8배, 14.2배 높았으며, 유기용매 가열추출은 2 가지 모두 상온보다 약 150 mg% 정도가 더 높게 나타났다. 또한 물과 메탄올추출물 모두 30분 이상에서는 크게 함량이 증가하지 않아 가열추출 시 60분 정도면 충분한 것으로 판단되었다. 가열처리에 따른 울금의 쓴맛성분의 변화는 물추출물의 경우는 $80^{\circ}C$ 이상의 처리구에서 쓴맛이 현저하게 감소되는 것으로 확인되었다. 그러나 $121^{\circ}C$ 처리구는 상온처리구 보다는 쓴맛이 약했으나 $100^{\circ}C$ 시료구보다 더 강한 쓴맛을 나타냈다. 에탄올의 경우는 상온과 $70^{\circ}C$ 두 시료구에서 차이를 보이지 않았다.

• 대한화학회지
• /
• 제46권6호
• /
• pp.523-527
• /
• 2002

LPG에서 황화합물의 분배계수에 미치는 영향에 관하여 연구하였다. 분석 대상 물질은 알칸계통에 사슬형머캡탄이었다. LPG의 액체상 및 기체상의 조성을 기체크로마토그래피로 분석하였다. SAS를 사용한 다중회귀분석방법(MLR)으로 황화합물의 끓는점(Bp), 온도(Tk), 용매의 조성(C4)과 관련되 분배계수를 다음과 같이 구할 수 있었다. Kpc=0.61222(${\pm}$0.000959)Bp+0.26984(${\pm}$0.06504)C40.003803(${\pm}$0.0019993)Tk, N=24, F=14.851, $R^2_{adj}$=0.6437. 분배계수에 미치는 중요 인자는 황화합물의 대기압에서 끓는점과 LPG의 조성이었다. n-부탄의 높은 조성 및 높은 온도에는 분배계수가 증가하여 가스의 취기 상승효과가 클 것으로 추측된다.

• 한국결정성장학회지
• /
• 제17권5호
• /
• pp.210-216
• /
• 2007

극청정 가스필터용 다공성 멤브레인을 제조하기 위해 금속산화물 분말의 in-situ한 환원/소결 공정을 이용하였다. 또한 기공도의 향상을 위해 solid pore forming agent로써 구형의 폴리머 입자를 첨가하여 금속 섬유를 사용한 멤브레인과 비슷한 52%의 기공도를 가지는 니켈 멤브레인을 제조하였다. 제조된 니켈 멤브레인은 폴리머의 첨가에 따라 평균기공크기와 기공도가 증가하였다. 한편 환원/소결 온도가 $800^{\circ}C$에서 $1000^{\circ}C$로 상승함에 따라 평균기공크기와 기공도는 감소하였다. 이는 환원/소결 온도가 상승함에 따라 격자확산 및 입계확산이 진행되어 멤브레인의 수축률 증가를 일으켰기 때문이다.

• 한국재료학회지
• /
• 제22권8호
• /
• pp.433-438
• /
• 2012

A chemical process involves polymerization within microspheres, whereas a physical process involves the dispersion of polymer in a nonsolvent. Nano-sized monodisperse microspheres are usually prepared by chemical processes such as water-based emulsions, seed suspension polymerization, nonaqueous dispersion polymerization, and precipitation polymerizations. Polymerization was performed in a four-necked, separate-type flask equipped with a stirrer, a condenser, a nitrogen inlet, and a rubber stopper for adding the initiator with a syringe. Nitrogen was bubbled through the mixture of reagents for 1 hr. before elevating the temperature. Functional silane (3-mercaptopropyl)trimethoxysilane (MPTMS) was used for the modification of silica nanoparticles and the self-assembled monolayers obtained were characterized by X-ray photoelectron spectroscopy (XPS), laser scattering system (LSS), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), elemental analysis (EA), and thermogravimetric analysis (TGA). In addition, polymer microspheres were polymerized by radical polymerization of ${\gamma}$-mercaptopropyl modified silica nanoparticles (MPSN) and acrylamide monomer via precipitation polymerization; then, their characteristics were investigated. From the elemental analysis results, it can be concluded that the conversion rate of acrylamide monomer was 93% and that polyacrylamide grafted to MPSN nanospheres via the radical precipitation polymerization with AAm in ethanol solvent. The microspheres were successfully polymerized by the 'graft from' method.

• 농업과학연구
• /
• 제45권2호
• /
• pp.169-176
• /
• 2018

This study evaluated the effects of Glycine soja (GS) and hairy vetch supplementation on the quality of corn silage. The feeding regimen consisted of a corn silage (Control) and a control supplemented either with 20% GS or 20% hairy vetch with four replicates. All experimental diets were stored for 40 days at room temperature ($20-25^{\circ}C$). The control had a higher (p < 0.05) dry matter level but had a lower level (p < 0.05) of crude protein, crude fat, acid detergent fiber and neutral detergent fiber than any other treatments. Hairy vetch had a higher level (p < 0.05) of acetic acid and butyric acid than any other groups but had a lower level (p < 0.05) of lactic acid than that of the control. A lower silage pH was observed (p < 0.05) in the control compared to the other treatments. The control had lower (p < 0.05) sucrose and fructose concentrations compared to the other treatments. Corn silage supplemented with hairy vetch showed a higher level (p < 0.05) of crude protein and buffer solution protein and a higher ratio of soluble protein to insoluble protein than any of the other groups. Thus, the results of the present study suggest that GS and hairy vetch supplementation of corn silage would be beneficial for maintaining quality and elevating protein levels when compared to the control.

• Journal of the Korean Wood Science and Technology
• /
• 제35권4호
• /
• pp.21-28
• /
• 2007

탄화온도에 따른 목탄의 pH, 원소함량비와 목탄 표면의 FT-IR 변화를 분석하기 위하여 잣나무 목탄이 사용되었다. 300, $400^{\circ}C$의 탄화온도에서 제조된 잣나무 목탄의 pH는 각각 5.27, 6.80로 측정된 반면, $500{\sim}900^{\circ}C$에서 제조된 시료의 pH는 크게 높아져 9.25~10.35로 나타났다. 탄화 온도의 차이에 따른 목탄의 원소 조성비 변화에 있어서는, 고온 탄화 목탄일수록 C 함유율이 높아지고 상대적으로 O, H의 함유율은 낮아졌다. 가장 큰 원소 조성비 변화 폭은 400와 $500^{\circ}C$의 탄화 온도에서 측정되었다. 300, $400^{\circ}C$에서 제조된 목탄의 C, O, H 원소함량비는 각긱 67.7, 28.9, 3.0%와 72.2, 24.9, 2.5%로 측정된 반면, $500{\sim}900^{\circ}C$ 사이에서 제조된 목탄의 C, O, H 함량비는 각각 83.3~90.5%, 13.6~9.0%, 2.7~0.3% 사이로 나타났다. FT-IR에 의한 목탄 표면 관능기 분석은 탄화 전 목분과 각각 $300{\sim}900^{\circ}C$ 사이의 온도에서 제조된 목탄의 IR-스펙트럼 비교로 이루어졌다. 300와 $400^{\circ}C$에서 탄화된 목탄의 표면에는 Lactone, Lactol, Carboxylic acid, Carboxylic anhydride 등의 산성 관능기들을 많이 포함하는 것으로 유추되는 반면, $500^{\circ}C$ 이상의 온도에서 탄화된 목탄의 경우에는 Pyrone 계토의 관능기를 많이 포함하는 것으로 판단된다.

• 한국농림기상학회지
• /
• 제17권3호
• /
• pp.248-253
• /
• 2015

본 연구는 미래 기후변화 시나리오에 근거하여 예측되는 온도를 노지채소인 고추에 적용하여 환경제어챔버에서 재배하였을 때 생육 및 과실품질에 미치는 영향을 살펴보았다. 챔버내 온도는 노지고추 주산지인 안동지역의 평년(1971~2000; 30년) 5월 1일부터 7월 30일까지의 일평균 기온자료를 토대로 IT (Intraday temperature: 기준온도), IT+$2^{\circ}C$, IT+$4^{\circ}C$, IT+$6^{\circ}C$ 등 4 수준으로 설정하였다. 대조구인 일평균온도보다 고온에서 재배하였을 때 초장도 길었고, 분지수, 엽수와 지상부 생체중과 건물중이 증가하였다. IT+$2^{\circ}C$(평균온도 $22.8^{\circ}C$)에서 정식 후 30~60일간의 개화수가 가장 많았다. 따라서 개체당 착과수 및 과실 생체중은 IT+$2^{\circ}C$에서 가장 많았으며, 그 이상의 온도에서 온도가 높을수록 과중은 적었고 과장도 짧아졌으며 과경도 줄었다. 이상의 결과로 보아 안동지역에서 현재의 일일 온도변화 주기가 유지된다고 가정할 경우, 기후변화시나리오에 따라 온도가 평년기온보다 $2^{\circ}C$ 상승하였을 때, 과실 수량이 증가되고 품질도 유지되겠으나, 그 이상의 온도에서는 수확량이 크게 감소할 것으로 예측된다.