• Steel and Composite Structures
• /
• 제30권2호
• /
• pp.141-147
• /
• 2019

Fire is one of the environmental parameters affecting the structure causing element internal forces to change, as well as reducing the strength of the materials. One of the common types of floors in tall steel structures is the steel concrete composite slab. Shear connectors are used in steel and concrete composite beam in various shapes also has played significant role in a burning fire event of building with a steel concrete composite beam. The current study has reviewed the effects of temperature raising on the angle connector behavior through the use of push out tests and monotonic static force. The results have shown (1) the ductility of the samples is acceptable based on EC4 standard; (2) temperature raising has reduced the stiffness; (3) the shear ductility increment; and (4) the shear capacity reduction. Also, the amount of angle shear connector resistance has been decreased from 18.5% to 41% at ambient temperature up to $850^{\circ}C$.

• 한국습지학회지
• /
• 제14권1호
• /
• pp.1-9
• /
• 2012

지구온난화에 따른 온도상승은 식물의 생식생장 시기 및 생식기관 생산량에 영향을 미친다. 본 실험은 한국특산식물인 섬자리공을 대상으로 대조구(야외조건)와 처리구(700~800ppm $CO_2$, 온도 $2^{\circ}C$상승)를 구분하여 2010년 3월부터 2011년 4월까지 14개월 동안 생식생장단계에서의 식물계절학을 관찰하고, 생식기관 생산량을 측정하였다. 개엽시기, 꽃대 형성시기, 개화시기, 열매형성시기 그리고 열매성숙시기는 처리구가 대조구보다 6~20일 빨랐다. 결실율, 줄기당 열매수, 줄기당 열매무게, 줄기당 종자무게, 줄기당 종자수는 대조구가 처리구 보다 모두 높았다. 줄기당 꽃대수, 영양기관은 차이가 없었다. 이러한 결과는 지구온난화가 되면 섬자리공은 영양기관이 영향을 받지 않지만, 개엽, 개화, 성숙이 일찍 되고, 번식에 결정적인 요인인 열매 생산등은 감소하게 되어 결과적으로 식물번식에 부정적임을 의미한다.

• 생태와환경
• /
• 제53권3호
• /
• pp.295-303
• /
• 2020

We investigated the growth response and population regeneration of four halophyte species: Suaeda japonica, Salicornia europaea, Suaeda maritima and Suaeda glauca, when climate change proceeds caused by increased CO₂ concentration and temperature. The plants collected from habitat in 2018 were transplanted into Wagner pots, and cultivated for two years in greenhouse divided into a control (ambient condition) and a treatment (elevated CO₂+elevated temperature). The shoot length of halophytes was measured in July of each year, and the population regeneration rate was measured in October 2019. The shoot lengths of S. japonica and S. glauca had no difference between control and treatment for two years. Those of S. europaea were longer in control than treatment for two years. Those of S. maritima had no difference between control and treatment in 2018 but were longer in control than treatment in 2019. In control, the shoot lengths of S. japonica, S. europaea and S. glauca had no difference between years while those of S. maritima were longer in 2018 than in 2019. In treatment, those of S. japonica, S. europaea and S. maritima were shorter in 2019 than 2018 but S. glauca had no difference between years. The regeneration rates of S. japonica, S. europaea and S. glauca were lower treatment than control, and there was no difference in the regeneration rate of S. maritima. In conclusion, if climate change progresses caused by the increase of CO₂ concentration and temperature, the shoot lengths of S. japonica, S. europaea and S. maritima will be shortened, and the regeneration rate of population will be increased only in the S. maritima.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.29-36
• /
• 2016

The effect of high ambient temperature and pressure conditions on the combustion performance of n-butanol, n-heptane and its mixing fuel (BH 20) were studied in this work. To reveal this, the closed homogeneous reactor model applied and 1000-1200 K of the initial temperature, 20-30 atm of initial pressure and 1.0 of equivalence ratio were set to numerical analysis. It was found that the results of combustion temperature was increased and the ignition delay was decreased when the ambient conditions were elevated since the combustion reactivity increased at the high ambient conditions. On the contrary, under the low combustion temperature condition, the combustion pressure was more influenced by the ambient temperature in the same ambient conditions. In addition, the total mass and the mass density of tested fuels were influenced by the ambient pressure and temperature. Also, soot generation of mixing fuel was decreased than n-heptane fuel due to the oxygen content of n-butanol fuel.

• 콘크리트학회논문집
• /
• 제23권6호
• /
• pp.723-730
• /
• 2011

콘크리트 중의 골재가 차지하는 비율은 약 70~80 vol%로서 콘크리트의 고온 역학적 성상에 큰 영향요소로 작용할 수 있다. 이 연구는 고온시 콘크리트의 역학적 특성을 평가하기 위한 일환으로써 다양한 환경조건, 즉 고온조건, 하중조건에 따른 역학적 특성을 비교하기 위하여 목표강도 60 MPa급 보통 골재 및 경량 골재 콘크리트를 대상으로 선정하였다. 사용된 시험체는 ${\phi}100{\times}200mm$로서 상온 압축강도의 0%, 20%, 40% 하중을 재하한 상태에서 고온에 따른 강도, 탄성계수, 열팽창 변형(thermal strain), 전체 변형(total strain), 내력저하수축(transient creep) 등 고온에서의 역학적 특성을 평가하였다. 시험 결과 골재의 열팽창계수가 작은 경량 콘크리트는 열팽창 변형이 일반 골재를 사용한 콘크리트에 비하여 전반적으로 작게 나타났으며, 고온조건인 $700^{\circ}C$에서도 압축강도 저하가 상온강도에 대하여 80% 수준으로 나타났다. 또한 재하에 의한 내력저하수축은 $500^{\circ}C$를 기준으로 콘크리트의 변형을 팽창에서 수축으로 전환시키는 영향요인으로써, 콘크리트와 골재의 열팽창 변형비(concrete /aggregate)가 수축의 경향이 큰 경우 콘크리트의 내력저하가 적은 경향을 확인할 수 있었다.

• Elastomers and Composites
• /
• 제36권4호
• /
• pp.255-261
• /
• 2001

Precut을 가지고 있는 고무 시편에서 서로 다른 온도에서 인장 강도의 영향을 조사하였다. 온도 조건에 따라 precut이 있는 시편과 precut이 없는 시편의 인장 강도는 서로 다른 거동을 보였다. $80^{\circ}C$에서는 임계 Precut 크기보다 더 큰 precut를 가지는 시편은 상온에서 시편보다 높은 인장 강도를 보였다. 상온에서 측정한 시편에 비하며 $80^{\circ}C$에서 측정한 시편은 잘 발달된 2차 균열들을 가지고 있는 반면, $110^{\circ}C$에서 측정한 시편의 경우 2차 균열들이 명확하게 발달하지 못하였다. 서로 다른 온도에서 인장강도의 차이는 인장시 발달된 결정화도와 균열 끝 부분에서 형성된 미세 균열 형상과 관계가 있는 것으로 보인다.

• 한국염색가공학회지
• /
• 제34권3호
• /
• pp.197-206
• /
• 2022

The purpose of this study was to confirm the optimal spinning conditions for PLA (Polylactic acid) as a fiber forming polymer. According to the melt spinning test results of PLA, the optimal spinning temperature was 258℃. However, it needs to note that relatively high pack pressure was required for spinning at 258℃. At an elevated temperature, 262℃, mono filament was broken easily due to hydrolysis of PLA at a higher temperature. In case of fiber strength, it was confirmed that the draw ratios of 2.7 to 3.3 were optimal for maximum strength of melt spun PLA. Above the draw ratio, 3.3, the strength of the PLA fibers was lowered. It was presumed that cleavage of the PLA polymer chain over maximum elongation. The heat setting temperature of GR (Godet roller) showed that the maximum strength of the PLA fibers was revealed around 100℃. The degree of crystallinity and the strength of the PLA fibers were decreased above 100℃. The optimal take-up speed (Spinning speed) was around 4,000m/min. Thermal analysis of PLA showed 170℃ and 57℃ as Tm (melting temperature) and Tg (glass transition temperature), respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.186-189
• /
• 2008

The flex plate, an automotive part which mounts to the automotive engine to transfer torque to transmission, should have considerable hardness and shape accuracy. As a way to produce the flex plate, the hot press forming technology which takes advantages of high formability at elevated temperature, enhanced strength and shape stability was introduced. Therefore, as one of major process parameters the heat treatment condition should be determined to obtain appropriate hardness in the range of manufacturer's specifications. In this study, two heat treatments, austempering and quenching and tempering (QT), were compared as feasible conditions fur the hot press forming of high-carbon tool steel and the hardness and toughness after heat treatments were evaluated. The study showed that both heat treatments resulted in improved hardness but only quenching and tempering showed practicable range of toughness.

• Bulletin of the Korean Chemical Society
• /
• 제24권4호
• /
• pp.460-466
• /
• 2003

For the drug master file (DMF) of ketoconazole, four impurities (1-4) contained in ketoconazole were synthesized. During the synthesis of 2, a new synthetic method of 1,4-dihydropyrazine was established. To oxidize the aminoalcohol (2j) to the aminal (2j-1), the standard Swern oxidation condition was modified to mask the nucleophilicity of the amino group temporarily using one equivalent of acetic acid. Derivative 3 was synthesized via regioselective bromination at the 2 position of the 4-aminophenol derivative (3a) using $Br_2$ in the presence of p-TsOH. The etherification of aryl bromide with the phenol derivative (1f) was accomplished by a modification of the general Cu-mediated reaction condition using excess 1f itself as a solvent at elevated temperature (190 ℃).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.80-83
• /
• 2003

Generally, forging process has been known to enhance most of the mechanical properties by developing the continuous metal flow across the forged stocks. However, we have found out that forging of Al 6061 did not always give the enhancement of the mechanical properties but the degradation of the original characteristics, especailly for a extruded Al 6061. There are several candidates for the culprit of this unfavorable phenomenon. We have been trying to clear out the cause of the mechanical degradation of the forged a extruded Al 6061. One of the most plausible causes seems to be that the particles containing Mn and/or Cr is coarsened and redistributed preferencially onto grain boundaries due to a repetitive exposure in an elevated temperature condition. On the other hand, a continuously cast Al 6061 did not show any strength degradation after a hot forging under the same process condition with the extruded Al 6061.