• 한국물환경학회지
• /
• 제22권1호
• /
• pp.172-176
• /
• 2006

Fe(III)-Coated Star Fish (ICSF) was prepared by reaction of calcined Star Fish (SF) with Fe(III) solution at an elevated temperature. To investigate the stability of ICSF at acidic condition, dissolution of Fe was studied at pH 2 as a function of time. Extracted iron was negligible over the entire reaction time. This stability test suggests the applicability of ICSF in the treatment of wastewater even at low pH. Adsorption capacity of Cu(II) onto SF and ICSF was investigated in a batch and a column test. In the pH-edge adsorption, adsorption of copper onto SF and ICSF was quite similar over the entire pH range due to the presence of an important amount of Fe in SF itself. From the adsorption isotherm obtained with variation of the concentration of Cu(II), ICSF showed 1.6 times greater adsorption capacity than SF. Also, ICSF showed a greater removal capacity of Cu(II) in the column test.

• Advances in concrete construction
• /
• 제4권2호
• /
• pp.89-105
• /
• 2016

The post - fire investigation is conducted on a fire-affected reinforced concrete shear wall building to ascertain the level of its strength degradation due to the fire incident. Fire incident took place in a three-storey building made of reinforced concrete shear wall and roof with operating floors made of steel beams and chequered plates. The usage of the building is to handle explosives. Elevated temperature during the fire is estimated to be $350^{\circ}C$ based on visual inspection. Destructive (core extraction) and non-destructive (rebound hammer and ultrasonic pulse velocity) tests are conducted to evaluate the concrete strength. X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) are used for analyzing micro structural changes of the concrete due to fire. Tests are conducted for concrete walls and roof slab on both burnt and unburnt locations. The analysis of test results reveals no significant degradation of the building after the fire which signifies that the structure can be used with full expectancy of performance for the remaining service life. This document can be used as a reference for future forensic investigations of similar fire affected concrete structures.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.774-778
• /
• 2004

The atomization process of a circular $SF_{6}$ liquid jet issued into an otherwise quiescent, high-pressure $N_2$ gas was observed to explore the breakup mechanism of liquid ligaments involved in turbulent atomization. Both liquid and gas temperatures were fixed at a room temperature but the gas pressure was elevated to more than twice the critical pressure of $SF_{6}$. Therefore, the liquid surface was in a thermodynamic state close to a critical mixing condition with suppressed vaporization. Since the surface tension and the surface gas density approach zero and the surface liquid density, respectively, phenomena equivalent to those which would appear when a very high speed laminar flow of water were injected into the atmospheric-pressure air can be observed by issuing $SF_{6}$ liquid at low speeds in micro-gravity environment which avoid disturbances due to gravity forces. The instability ob near-critical mixing surface jet was quantitatively characterized using a newly developed device, which could issue a very small amount of $SF_{6}$ liquid at small constant velocity into a very high-pressure $N_2$ gas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.479-482
• /
• 1999

Cured epoxy resins are extensively used for the electrical insulation in high-voltage equipments. The bisphenol A-based epoxy resins lured with azine show, especially, good thermal properties and mechanical resistances. For the technical and economic reasons, varing amount of inorganic fillers are added to endow the required special properties. In the large generators and motors of power plants, epoxy insulation is disclosed to the harsh conditions like the superheated steam and abrupt temperature variation. Hygrothermal aging at elevated temperatures tends to induce degradation in epoxy resins. To predict the effect of this degradation in DGEBA/MDA/SN/zeolite system, we proceeded the forced moisture absorption experiment using the autoclave. The thermal properties of the untreated and treated specimens were analyzed by DSC and TGA under the nitrogen flowing condition. The moisture absorption results showed a weight increase during hygrothermal aging at 1207. At the initial aging period, the system leaded to more or less postcuring but more prolonged environmental aging leaded the discoloration of specimen and lowering the T$_{g}$./.

• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.52-58
• /
• 2010

Bulk nanostructured metallic materials are generally synthesized by bottom-up processing which starts from powders for assembling bulk materials. In this study, the bottom-up powder metallurgy and High Pressure Torsion (HPT) approaches were combined to achieve both full density and grain refinement at the same time. After the HPT process at 473K, the disk samples reached a steady state condition when the microstructure and properties no longer evolve, and equilibrium boundaries with high angle grain boundaries (HAGBs) were dominant. The well dispersed alumina particles played important role of obstacles to dislocation glide and to grain growth, and thus, reduced the grain size at elevated temperature. The small grain size with HAGBs resulted in high strength and good ductility.

• 인간식물환경학회지
• /
• 제24권1호
• /
• pp.85-94
• /
• 2021

Background and objective: This study examined, compared, and analyzed the tree vitality of the trees growing on the artificial ground of Seoullo 7017 that transformed the overpass that was to be demolished into a "sky garden" using portable tree pots. Methods: Based on the summer season when the metabolic activity of plants is most active, this study measured the cambial electrical resistance in four directions(east, west, south and north), using the Shigometer (model OZ-93, Osmose) and compared the location and analysis of pots according to their means and standard errors. Results: Meanwhile, according to the analysis, vitality was relatively superior in pots with a big diameter, trees planted individually than in groups, trees of the ramp section rather than the bridge section, and in the southwest direction of the cambium. Conclusion: This study revealed the improper condition of the planting plan and implementation on the site, where various species of trees are displayed in a poor environment. Despite the significant assessment of the vitality of various trees introduced within Seoullo 7017 for the first time, this study is limited in that the data used were measured only once in summer. In this regard, it raised the need for continuous interest in and monitoring of a special plant environment and development of proper maintenance and management techniques, along with follow-up research on seasonal and temperature conditions, soil moisture and root development conditions to supplement this research.

• Journal of Trauma and Injury
• /
• 제36권3호
• /
• pp.249-252
• /
• 2023

Neuroleptic malignant syndrome (NMS) is a rare but fatal condition, with a high mortality rate. NMS is characterized by altered mental status, fever, myoclonus, autonomic dysfunctions, and elevated creatinine phosphokinase. The clinical manifestations may be confused with alcohol-related symptoms, trauma, sepsis, postoperative agitation, or malignant hyperthermia. A 69-year-old male patient with alcohol withdrawal was admitted to the operating theatre to rule out septic shock due to mesenteric injury after multiple trauma. He was suspected NMS with abrupt increase body temperature to 41.7℃ after haloperidol administration. Active cooling and rapid fluid infusion was done during anesthesia. Delayed diagnosis and treatment of NMS lead to catastrophic result. Therefore, if the patient's past medical history is unknown or clinical symptoms develop that are suggestive of NMS, early treatment must be considered.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.247-254
• /
• 2014

화재시 콘크리트 구조물은 구성재료의 상이한 열적특성으로 인해 강도가 저하하고 동시에 수직부재는 수평부재의 팽창에 의한 모멘트하중을 받아 전단파괴가 발생한다. 따라서 여러가지 화재곡선을 사용한 콘크리트 구조물의 화재시 거동에 대한 연구가 많이 이루어졌지만 주로 온도상승구간에서 발생하는 폭렬특성과 열팽창변형에 관한 연구가 대부분이다. 하지만 고온이 유지될 경우 발생할 수 있는 크리프변형은 화재시 구조물의 안정성에 큰 영향을 미치지만 상대적으로 연구가 미진한 상태이다. 또한 이러한 고온을 받는 콘크리트의 안정성에는 체적의 대부분을 차지하는 굵은골재의 열적특성이 큰 영향을 미치기 때문에 이 연구에서는 화강암계, clay계, clay-ash계 세 종류의 굵은골재를 사용한 콘크리트의 고온 역학적 특성을 평가했다. 그 결과 굵은골재의 성인으로 인한 내부공극 때문에 경량골재를 사용한 콘크리트가 일반골재를 사용한 콘크리트보다 높은 고온강도 및 탄성계수를 나타냈고 열팽창변형과 전체변형의 경우 더 낮은 변형률을 나타내어 온도상승구간에서의 구조적 안정성 측면에서 유리한 것으로 판단되었다. 그러나 고온크리프의 경우 내부공극으로 인해 더 큰 수축량이 발생하기 때문에 내화성능설계시에 이에 대한 추가적인 고려가 필요할 것으로 판단되었다.

• Elastomers and Composites
• /
• 제48권2호
• /
• pp.94-102
• /
• 2013

실리카와 실란을 포함하는 고무복합체의 최적 배합 조건을 찾기 위하여 다양한 온도에서 배합 후 고무복합체의 특성을 평가하였다. 1차 배합 온도를 105, 120, 130, 140, $160^{\circ}C$로 각각 다르게 배합한 결과 고무복합체의 점도는 $105^{\circ}C$에서는 매우 높았고, $120^{\circ}C$부터 $140^{\circ}C$ 영역에서는 유사하나, $160^{\circ}C$에서는 오히려 증가하였다. 기계적 물성과 동적점탄성 특성을 평가한 결과 $120^{\circ}C$보다 낮은 온도에서는 실리카-실란 반응이 충분치 않음을 알 수 있었고, $160^{\circ}C$의 높은 온도에서는 배합 중 실란커플링제 내에 존재하는 유황에 의하여 가교반응이 진행되는 문제가 있음을 알 수 있었다. 그러나 $120^{\circ}C$에서 $140^{\circ}C$영역에서는 온도가 높을수록 반응이 더 빨리 진행되어 알코올의 제거에는 유리하지만 동적점탄성 특성이나 기계적 성질에 대한 경향성이 분명하게 나타나지 않았다.

• 한국결정성장학회지
• /
• 제13권2호
• /
• pp.88-92
• /
• 2003

본 연구에서는, Mn-Co-Ni 산화물계 NTC 써미스터의 열처리 조건에 따른 전기적 특성간의 상호관계에 대하여 고찰하였으며, 이를 위해 XRD. 소결체 밀도측정 및 B정수, 저항 열방산정수 등의 전기적 특성치를 조사하였다. NTC 써미스터의 열처리 과정은 Mn-Co-Ni 산화물 시험편의 소결특성에 큰 영향을 미치고있었으며, 본 연구의 조성하에서는 $1250^{\circ}C$, 2시간 동안 열처리한 경우 가장 높은 밀도치를 얻을 수 있었다. 이 조건하에서 미세구조 관찰결과 치밀화과정이 거의 완전하게 이뤄짐을 확인하였다. 제조된 NTC 써미스터는 소결 온도가 상승함에 따라 저항값 및 B 정수값이 커지는 것을 확인하였으며, 연료 액위의 변화에 다른 출력전압의 거동을 측정한 결과 선형 감소 거동을 나타내었다. 따라서, 본 연구에서 제조된 Mn-Co-Ni 산화물계 NTC 써미스터의 전기적 특성은 열처리 조건과 밀접한 연관성이 존재하는 것으로 사료되며, 향후 자동차용 연료액위센서로의 응용성이 가능할 것으로 기대된다.