• Computers and Concrete
• /
• 제1권2호
• /
• pp.131-150
• /
• 2004

We present in this work a coupled phenomenological chemo-mechanical model that represents the degradation of concrete-like materials. The chemical behaviour is described by the nowadays well known simplified calcium leaching approach. And the mechanical damage behaviour is described by a continuum damage model which involves the gradient of the damage quantity. The coupled nonlinear problem at hand is addressed within the context of the finite element method. For the equation governing the calcium dissolution-diffusion part of the problem, special care is taken to treat the highly nonlinear calcium conductivity and solid calcium functions. The algorithmic design is based on a Newton-type iterative scheme where use is made of a recently proposed relaxed linearization procedure. And for the equation governing the damage part of the problem, an augmented Lagrangian formulation is used to take into account the damage irreversibility constraint. Finally, numerical simulations are compared with experimental results on cement paste.

• Composites Research
• /
• 제13권1호
• /
• pp.25-32
• /
• 2000

국부압축력을 받는 스트링거 보강 복합적층 만곡 판넬의 좌굴 및 후좌굴 거동을 개발한 유한요소프로그램을 이용하여 해석하였다. 후좌굴 해석은 판넬거동을 세 가지로 나누어 해석하였다. 판넬과 보강재를 모델링 하기 위하여 8절점응축 쉘요소를 도입하고 비선형유한 요소 수식화를 위해 2nd Piola-Kirchhoff 응력텐서와 Lagrangian 변형률 텐서를 채택하였다. 파손 특성을 고려하기 위해 점진적 파손해석을 도입하였다. 국부축하중을 받는 복합적층 만곡 판넬의 좌굴하중 및 좌굴후 극한하중, 국부좌굴과 전체좌굴, 그리고 보강재 영향이 인자별로 해석 비교 된다.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.354-362
• /
• 1995

The finite element modeling is used to study the buckling and postbuckling behavior of composite laminates with an embedded delamination. Degenerated shell element and rigid beam element are utilized for the finite element modeling. In the nonlinear finite element formulation, the updated Lagrangian description method based on the second Piola-Kirchhoff stress tensor and the Green strain tensor is used. The buckling and postbuckling behavior of composite laminates with a delamination are investigated for various delamination sizes, stacking sequences, and boundary conditions. It is shown that the buckling load and postbuckling behavior of composite laminates depend on the buckling model which is determined by the delamination size, stacking sequence and boundary condition. Also, results show that introduction of couplings can reduce greatly the buckling load.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.17-21
• /
• 2002

A finite element method based on the two-dimensional progressive failure analysis is presented for characterizing the strength and failure of the unidirectional-fabric hybrid laminated composite joints under pin loading. The 8-node laminated shell element is incorporated in the updated Lagrangian formulation. Various failure criteria including the maximum stress, Tsai-Wu, Yamada-Sun, and combinations of them are used in conjunction with the complete unloading stiffness degradation method. For the verification, joint tests are conducted for the specimens with various geometries. Although there are some differences depending on the geometry, the finite element model using the Yamada-Sun or the combined Yamada-Sun and Tsai-Wu criterion predicts the failure strength best.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제1권1호
• /
• pp.91-100
• /
• 1993

A displacement-based finite element method Is presented for the geometrically nonlinear analysis of eccentrically stiffened plates. A nonlinear degenerated shell element and a nonlinear degenerated eccentric isoparametric beam (isobeam) element are formulated on the basis of Total Agrangian and Updated Lagrangian descriptions. In the formulation of the isobeam element, some additional local decrees of freedom are implementd to describe the stiffener's local plate buckling modes. Therefore this element can be effectively employed to model the eccentric stiffener with fewer D.O.F's than the case of a degenerated shell element. Some detailed buckling and nonlinear analyses of an eccentrically stiffened plate are performed to estimate the critical buckling loads and the post buckling behaviors including the local plate buckling of the stiffeners discretized with the degenerated shell elements and the isobeam elements. The critical buckling loads are found to be higher than the analytical plate buckling load but lower than Euler buckling load of the corresponding column, i.e, buckling strength requirements of the Classification Societies for the stiffened plates.

• 한국방재학회 논문집
• /
• 제7권5호
• /
• pp.61-71
• /
• 2007

Navier 해 및 유한요소 해를 두께 방향으로 재료의 성질이 변하는 점진기능재료 판 및 쉘의 해석을 위해 제시하였다. 판과 쉘의 두께를 따라 완만하게 변하는 등방성 구조물의 두께방향에 따른 역학적 특성을 고려하기 위하여 S 형상 함수를 적용한 점진기능재료를 고려하였다. 비선형 9 절점 요소기저 Lagrangian 쉘 요소의 정식화를 기하학적 비선형 해석을 위해 제시하였다. 자연 좌표계에 의한 변형률이 본 연구의 쉘요소에 사용된다. 1차 전단변형이론에 의한 수치 해석 예제로 상면과 하면의 탄성 계수의 변화, 하중조건, 형상 비 그리고 폭-두께 비에 따른 역학적 거동을 연구하였다. 또한 거듭제곱 매개 변수의 변화에 따른 점진기능재료 구조물의 결과들을 조사하였다.

• Korea-Australia Rheology Journal
• /
• 제19권4호
• /
• pp.233-242
• /
• 2007

We performed a numerical investigation to find out the optimal choice of the spatial discretization in the distributed-Lagrangian-multiplier/fictitious-domain (DLM/FD) method for the solid/fluid interaction problem. The elastic solid bar attached on the bottom in a pressure-driven channel flow of a Newtonian fluid was selected as a model problem. Our formulation is based on the scheme of Yu (2005) for the interaction between flexible bodies and fluid. A fixed regular rectangular discretization was applied for the description of solid and fluid domain by using the fictitious domain concept. The hydrodynamic interaction between solid and fluid was treated implicitly by the distributed Lagrangian multiplier method. Considering a simplified problem of the Stokes flow and the linearized elasticity, two numerical factors were investigated to clarify their effects and to find the optimum condition: the distribution of Lagrangian multipliers and the solid/fluid interfacial condition. The robustness of this method was verified through the mesh convergence and a pseudo-time step test. We found that the fluid stress in a fictitious solid domain can be neglected and that the Lagrangian multipliers are better to be applied on the entire solid domain. These results will be used to extend our study to systems of elastic particle in the Stokes flow, and of particles in the viscoelastic fluid.

• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.895-906
• /
• 2014

대수심 부유 구조물의 하부기초 기술 중 하나인 dynamically penetration anchor (DPA 또는 흔히 torpedo anchor로 칭함)의 거동특성을 시험결과 및 수치 해석적 접근을 통해 분석하였다. 기존의 유한요소 해석기법으로는 이러한 대수심 anchor 구조물의 거동 특성을 적절히 모사하기 어렵기 때문에 본 연구에서는 이러한 부분을 해결하기 위해 Coupled Eulerian-Lagrangian (CEL) 법을 통해 지반-구조물 사이에서 발생하는 메쉬(mesh)의 distortion 현상 및 경계조건 등의 문제점을 대변형의 관점에서 해결하고자 하였다. 실측치와의 비교를 통해, CEL 기법의 타당성을 검증하였고, 그 결과 본 연구에서 적용한 CEL 기법이 기존 유한요소 기술로는 구현이 불가능한 대수심 anchoring system의 자유낙하에 의한 전반적인 거동 및 지반의 변형특성을 적절히 예측함을 알 수 있었다. 또한 검증된 기법을 바탕으로 dynamic anchor의 거동에 영향을 주는 여러 요소들에 대한 매개변수 연구를 추가로 수행하였다.

• 대한조선학회논문집
• /
• 제30권1호
• /
• pp.145-156
• /
• 1993

대변형, 대회전, 대변형도 문제를 고려한 탄소성-손상 유한요소 정식화 과정을 연구함으로써 구조물의 모든 비선형 거동 및 손상을 합리적으로 예측할 수 있는 수치모형을 개발하였다. 재료의 소성 변형과정에서 발생되는 손상을 합리적으로 고려하기 위하여 연속체 손상역학의 접근방법을 이용하여 구성방정식을 정식화하였으며 Updated Lagrangian 정식화방법, 호장증분법 등의 비선형 강성방정식 해법을 적용하여 2차원 평면문제를 대상으로 하는 탄소성-손상 유한요소해석 프로그램을 구성하였다. 여러가지 예제 계산을 통하여 이 수치모형의 적용성 및 타당성을 검토한 결과 대변형 문제, 손상을 포함하는 재료 비선형문제 공히 합리적인 해석결과를 제시하고 있슴을 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.141-153
• /
• 1999

A finite element procedure for the analysis of rubber-like hyperelastic material is developed. The volumetric incompressiblity conditions of the rubber deformation is included in the formulation by using penalty method. In this paper, the behavior of the rubber deformation is represented by hyperelastic constitutive relations based on a generalized Mooney-Rivlin model. The principle of virtual work is used to derive nonlinear finite element equation for the large displacement problem and presented in total-Lagrangian description. The finite element procedure using analytic differentiation resulted in very close solution to the result of the well known commercial packages NISAII AND ABAQUS. Numerical tests show that the results from the numerical differentiation method coincide very well with those from the analytic method and the well known commercial packages in static analysis. The convergency of rubber usingν iteration method is also discussed.